Hi Experts!
Following Scenario:
1. Router D-Link DI-624+ Connected to Cable Modem and Laptop
2. Laptop Win XP SP2 Connected to Router D-Link (no WIFI active on Laptop)
Status:
Internet Access from Laptop fine.
3. Activate WIFI Asus P535 with WM6 (Connect to Router via WIFI, Cable connection to Laptop)
Status:
Internet Access from ASUS working well. LAN / Internet Connection from Laptop instable / off.
Router Configuration is "standard" with DHCP Enabled.
WIFI on Router: WPA-PSK
Resetting Router, using Static IP etc. is not successful!
Any Ideas ?
THX
Does anyone know of the Rhodium supports Promiscuous mode or Monitor Mode on its Wi-Fi?
Does anyone know which chipset the Rhodium uses for its Wi-Fi? I assume some drivers would be needed for Promiscuous mode?
I would be using a program called Handy Sniffer, version 2.07, which is a packet sniffer for Windows Mobile which supports Promiscuous mode IF the hardware does.
This would be great for testing environments which involve sniffing traffic. I'm
Does anyone have any ideas?
Hi ,
i dont know if this requires a new topic, but havent seen much on this. but has anyone been able to connect to wireless N Speed with Froyo?? i check my router stats and it still says my nexus is connected to G at 54mbps.. I have a Mac that connects fine to it in N Mode. anybody else been able to connect at those speeds?? or was this not included in the froyo update??
Cheers,
Dan
already in 2.1
Well I have connected as N and speed 65mbps...but then again I had that already in 2.1.
If I look in my d-link dir-655, it says that I'm using N-version in both android versions.
I tried with speed test I came up to downlink 16.44mbps uplink 4.24mbps with 2.2 and with 2.1 max speed was down 18.92mbps and up 2.21mbps.
hmmm... is there a specific channel ur using maybe? :S
im using a Dlink DIR -615.. its only a 2.4ghz, no the 5ghz N'
Here is a copy&paste from my router
Wireless Network Settings (Wireless manual settings)
Wireless Radio : Enabled (Always)
802.11 Mode : Mixed 802.11n, 802.11g and 802.11b
Enable Auto Channel Scan : On
Wireless Channel : 2.437 Ghz - Channel 6 (grayed out because its on automatic)
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40 Mhz
Wireless LAN (Status information)
Wireless Radio : Enabled
802.11 Mode : Mixed 802.11n, 802.11g and 802.11b
Channel Width : 40MHz
Channel : 1
Secondary Channel : 5
WISH : Active
Wi-Fi Protected Setup : Enabled/Configured
mmm, yeah my settings are the same...
is there anything on the Nexus needed to be changed or enabled?
i cant understand why it wont connect..
i might try force N only connects on my router,
Hi!
I have an Indian Tablet called penta T-pad, and I have problems connecting with Tp-link Td-W8901G router. The First one is that the tablet doesn't connect instantly to the router using Wi-Fi . it shows in the Wi-Fi network list that the Wi-Fi access point is "saved, secured with WAP/WAP2", And it doesn't connect until I tried several times and when it connected (this is the second problem) it sometimes doesn't send or receive and data. And I have tried resetting the tablet and the router and changing the broadcast channels and use static IP... But, this doesn't work.
By the way, other devices (smart phones, laptops...) can connect to the router without problems, and my tablet was working well during the last six months connecting to the same router. And now, it can connect to other routers or access points (i.e. portable Wi-Fi hotspot).
Thanks in advance, I am looking forward to your replays.
WiFi connection issues.
diana oulaby said:
Hi!
I have an Indian Tablet called penta T-pad, and I have problems connecting with Tp-link Td-W8901G router. The First one is that the tablet doesn't connect instantly to the router using Wi-Fi . it shows in the Wi-Fi network list that the Wi-Fi access point is "saved, secured with WAP/WAP2", And it doesn't connect until I tried several times and when it connected (this is the second problem) it sometimes doesn't send or receive and data. And I have tried resetting the tablet and the router and changing the broadcast channels and use static IP... But, this doesn't work.
By the way, other devices (smart phones, laptops...) can connect to the router without problems, and my tablet was working well during the last six months connecting to the same router. And now, it can connect to other routers or access points (i.e. portable Wi-Fi hotspot).
Thanks in advance, I am looking forward to your replays.
Click to expand...
Click to collapse
You mentioned you are using WAP/WAP2 for security, but have you entered the password or entered it correctly?
Does your router have the ability to add users?
If so, then activate this option and enter the MAC for every device you need to grant access through.
I looked for more information on your router, but could only locate this:
TD-W8901G Model Features and Specifications :
High speed DSL modem, NAT router and wireless access point in one device provides one-stop networking solution
54Mbps transmission rates, better for wireless network surfing or downloading
QoS enables smooth IPTV streaming and lag-free online gaming
Easy Setup Assistant provides quick & hassle free installation
SPI and NAT firewall protects end-user devices from potential attacks across the Internet
Port VLAN binds specific LAN ports and PVCs for differential services
Annex M allows for doubling the upstream data rate to 3.5Mbps
Auto-reconnect keeps you online indefinitely
TD-W8901G Model Technical Specifications :
HARDWARE FEATURES
Interface 4 10/100Mbps RJ45 Ports
1 RJ11 Port
Button 1 Power On/Off Switch
External Power Supply 9VDC/0.85A
IEEE Standards IEEE 802.3, 802.3u
ADSL Standards Full-rate ANSI T1.413 Issue 2, ITU-T G.992.1(G.DMT), ITU-T G.992.2(G.Lite)
ITU-T G.994.1 (G.hs), ITU-T G.995.1 , ITU-T G.996.1, ITU-T G.997.1, ITU-T K.2.1
ADSL2 Standards ITU-T G.992.3 (G.dmt.bis), ITU-T G.992.4 (G.lite.bis)
ADSL2+ Standards ITU-T G.992.5
Dimensions ( W x D x H ) 6.4×4.2×1.1 in. (165×108×28mm)
Antenna Type Omni directional, Detachable, Reverse SMA
Antenna Gain 5dBi
WIRELESS FEATURES
Wireless Standards IEEE 802.11g, 802.11b
Frequency 2.400-2.4835GHz
EIRP 20dBm(EIRP)
Wireless Security Support 64/128 bit WEP, WPA-PSK/WPA2-PSK,
Wireless MAC Filtering
SOFTWARE FEATURES
Quality of Service QoS Remarking based on IPP/ToS, DSCP and 802.1p
Port Forwarding Virtual server, DMZ, ACL(Access Control List)
VPN Pass-Through PPTP, L2TP, IPSec Pass-through
ATM/PPP Protocols ATM Forum UNI3.1/4.0,
PPP over ATM (RFC 2364),
PPP over Ethernet (RFC2516),
IPoA (RFC1577/2225),
PVC – Up to 8 PVCs,
Advanced Features Traffic Shaping(ATM QoS) UBR, CBR, VBR-rt, VBR-nrt;
Dynamic Host Configuration Protocol (DHCP), DHCP relay;
Network Address Translation (NAT); PVC/Ethernet Port Mapping
VLAN, 802.1P, Static Routing, RIP v1/v2 (optional);
DNS Relay, DDNS, IGMP snooping V1/2, IGMP Multicast, UPnP
Security NAT Firewall, SPI Firewall, MAC / IP / Packet / Application / URL Filtering, Denial of Service(DoS), SYN Flooding, Ping of Death
Management Web Based Configuration(HTTP), Remote management, Telnet management, Command Line Interface, SSL
for TR-069, SNMP v1/2c, SNMP over EOC, Web Based Firmware Upgrade, CWMP(TR-069), Diagnostic Tools
OTHERS
Certification CE, FCC, RoHS
Package Contents TD-W8901G
External Splitter
RJ-11 Telephone Cable
RJ-45 Ethernet Cable
Quick Installation Guide
Resource CD
Power Adapter
No other information on actual WiFi setups were able to be located. I wish I could be of more assistance.
Hi I have very similar problems with my devices!
I noticed it is extremely popular problem being discussed everywhere, but no general solution is ready yet, neither straight way of diagnostic...
Only some particular solutions sometimes appear, but they are for particular cases, usually involving deep and accurate adjustment and "pairing" of gadget and equipment.
It would be good to know any general tips like where to look for any info about the wifi connecting process, what are the possible reasons to fail to connect when the signal is high, wifi is visible, password is 100% correct, etc.
Perhaps we can find the log of wifi connecting process, switch it to debug mode, show to experts?
Please, experts, we are all waiting for your replies!
My wife has a problem with connecting to our wifi on her S5. It either does not connect to the network or if it does it cnnot access Internet. The signal is strong and we have a lot of other divices (Nexus ones, laptops etc) which connect and work without any issue.
Some of the router settings are as follows:
Mode: 802.11b/g/n
Security: WPA2-PSK
WPA encription: AES