I can't connect in wifi to my router Linksys WRT54G. I have this problem only between this router and this pda.
Please help me.
Thanks
Is your router set to 11G only, or 11B AND 11G? The Universal can only handle the slower 11B...
Now i can connect, but only if i use manual settings.
I added manually my wireless network and, under network adapters, i set the tiacxwin compatible wireless ethernet to use specific ip address.
And it works.
Now i must be sure that it work in my home too, where it was set all automatic.
Hi Experts!
Following Scenario:
1. Router D-Link DI-624+ Connected to Cable Modem and Laptop
2. Laptop Win XP SP2 Connected to Router D-Link (no WIFI active on Laptop)
Status:
Internet Access from Laptop fine.
3. Activate WIFI Asus P535 with WM6 (Connect to Router via WIFI, Cable connection to Laptop)
Status:
Internet Access from ASUS working well. LAN / Internet Connection from Laptop instable / off.
Router Configuration is "standard" with DHCP Enabled.
WIFI on Router: WPA-PSK
Resetting Router, using Static IP etc. is not successful!
Any Ideas ?
THX
Hi all,
i am new here
I have problem with my Xperia.
When i connect with my phone to unsecured Wifi network everything works fine.
But when the wifi network is secured (WPA2), i cann't access the internet. (IP address is assigned, but ping to the router is without answer)
I have allready trying to set the IP address manualy, but without any success.
Can somebady help me please?
Thanks
BR
Edo
Is the WLAN-SSID hidden? That often makes trouble with devices like Phones, Radios, MP3-Players or something else. If so try to activate SSID-Broadcast (unhide SSID) and connect again.
What does your phone show in it's wireless settings (IP, Gateway, Subnet, Encryption etc)?
On my Cisco router I use WPA2-PSK Authenication with AES-CCM Encryption. The SSID id is hidden. No problems at all....
Is your router using MAC Address filtering??
This will also make it unresponsive to pinging if it is Enabled
and your x1 in not on the permitted list!
good Luck.
Stuart
hi,
now i use only MAC address filtering (without WPA2) and it works fine.
(SSID broadcast is enabled)
With activated security WPA2, MAC address filtering dissabled, SSID broadcast enable/disabled, it doesn't work
Tested with wifi router Belkin.
With HTC Diamond it works fine also with WPA2 secured network.(almost the same HW like the Xperia)
Tomorrow i will "play" a little bit with the router and phone settings.
It must works !!!
Note: i have observed the same problem/behaviour with nokia E66 (OS Symbian)
Hi,
Netgear Router.
WPA2 enabled.
MAC filtering on.
Broadcast Off.
Device added.
Browsing a doddle.
Des. . .
Deactivating the encryption nor use of wep is never a good idea.
Try to change to wpa-psk tkip.
I'm not sure what it could be, but there are some articles on the internet that WinMo phones (in general) have trouble using WPA or WPA2. WEP is apparently fine to use, but then again not secure.
I have a netgear, and using WPA/WPA2 (no MAC ACL) on my router with the Xperia doesn't work, but some of the other guys work fine
Try updating your Router Firmware (or making sure you have the latest firmware flashed to your Router) - this has been known to solve connection problems with new hardware e.g. Windows Mobile or PS3 or Wii.
Hi guys:
wireless Router: D-link Dir-600
SSID: on
wireless channel: 11
there is wireless router in my house. The laptop connects to internet by wireless
router, but Magic can't find wi-fi network in the same room. Wi-Fi in my Magic works right in other places with unknown wireless router.
is anybody have suggestion?
Is anyone else having problems connecting to an 802.11n network? My 802.11n network will not show up under networks. I've got no problems connecting to my g network, but cannot connect to my n network.
I've tried disabling all security, 2.4ghz and 5ghz and resetting the router with no luck. Network is working fine on my laptop and desktop.
I've tried using wifi analyzer and still nothing.
Any suggestions?