I had this problem when I connect my phone to either Activesync or WMD Center
It does not always happen but when it occurs its annoying, I have to push the reset button to restart.
My PC Config
My Laptop: WVista Ultimate + Windows Mobile Device Center 6
My Desktop: W2000 Pro + activesync 4.2
Is this a ROM bug or hardware issue?
same problem here, til I turn off the USB-To-PC stuff in the Setting->Connection
a lot better, but still some
I've got a freeze everytime Sprite Backup is soft resetting when the device is attached through USB with my Laptop. The device starts up again but hangs while showing the Windows bootscreen after a while the screen turns black. I've to detach the usb connection and reset the device through the reset hole at the back to get it working again. But I don't know if it's the same freeze thing you guys have.
wonder said:
same problem here, til I turn off the USB-To-PC stuff in the Setting->Connection
a lot better, but still some
Click to expand...
Click to collapse
well, if you turn off USB to PC stuff basically you only lose speed in your connection no? since it's working in serial mode?
dpbakker said:
I've got a freeze everytime Sprite Backup is soft resetting when the device is attached through USB with my Laptop. The device starts up again but hangs while showing the Windows bootscreen after a while the screen turns black. I've to detach the usb connection and reset the device through the reset hole at the back to get it working again. But I don't know if it's the same freeze thing you guys have.
Click to expand...
Click to collapse
The problem that I have happens when I connect via USB...My screen does not turn black, but the screen behaves as in locked mode.. The screen can still recognize when I tap it because it turns on the backlight, but its not functioning....
Related
i soft rebooted my Wizard 8125 and it just sits at the windows screen it wont load into the today screen. is there anyway around this problem without hard reseting?
devGOD said:
i soft rebooted my Wizard 8125 and it just sits at the windows screen it wont load into the today screen. is there anyway around this problem without hard reseting?
Click to expand...
Click to collapse
Some try leaving the battery out a while before trying to boot - but i doubt if this will work. A hard reset is usually the fix.
Solution/reason of hang up on WM boot screen
I have the same problem. See my "solution" here:
http://forum.xda-developers.com/show....php?p=1122263
reflash it in USB connect mode (switch off, then on again while holding the camera button)
Uhu911 said:
reflash it in USB connect mode (switch off, then on again while holding the camera button)
Click to expand...
Click to collapse
The only way out is to either Hard reset the device or reflash in bootloaders while in usb connectivity and delete the partnership with Activesync.
I have installed a localization software. But after restart of the phone Windows did not load. Only blank white screen. What is the problem and can I fix it?
Sounds silly, but the phone isn't hooked up to USB is it? I had that happen when i soft resetted while connected to USB. All went well when i pulled the USB cable out and soft reset again (though it might not be your problem).
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
Two days ago my phone started to freeze up and the touch screen wouldn't work sometimes. Yesterday the phone froze so I pressed the reset button and when it turned back on the touch screen stop working for good. So I decided to do a master reset hoping it will work again, and now Im stuck on the windows mobile screen (green) and it says "tap the screen to set your windows mobile based device" but my touch screen doesn't work. Don't no what to do, the phone is stuck on this screen, please help!
this happened to me the other day. it was because of a program i had installed. all i had to do is uninstall the program and soft-reset. you shouldnt have master resetted. now you have to reflash your phone. what service and phone do you have? check the other posts for your oem rom. if you cant find it i'll help you with reflashing. good luck.
could b an easy fix wen it happened to me i was freakin i read somewere even the smallest thing between the screen and i dont a good word for it . were the srceen meets the phone one corner of my screen protecter was just between them the smallest peice in there took out my screen i anmost took it to get fixed im not saying u wont but make sure u clean the edges make sune theres nothing u in there first gl
Touch screen problem again
I have the same issue too, after hard-resetting the pda (HTC P4350) it is stuck on green screen with message " tap the screen to set up your windows mobile based device". The problem is touch screen of it is not working for quite a long time and because of this i have been using another p4350, but i think i am so careless and after dropping the second one into the water (it stayed only 3-4 seconds) its usb syncronization stopped to work, it can be charged but no data connection through usb cable (i have checked 3-4 different usb cables). Now i have a lot of information saved in the second one and i need to sync it with pc without using usb cable. I have planned to substitute pim.vol file of the first one with the second, then i will connect the first one to usb and finally sync. But this green screen really make me dissappointed.
Can anyone help me on this matter.
Thank you for all (at least for reading my problem)
sprogo said:
i have the same issue too, after hard-resetting the pda (htc p4350) it is stuck on green screen with message " tap the screen to set up your windows mobile based device". The problem is touch screen of it is not working for quite a long time and because of this i have been using another p4350, but i think i am so careless and after dropping the second one into the water (it stayed only 3-4 seconds) its usb syncronization stopped to work, it can be charged but no data connection through usb cable (i have checked 3-4 different usb cables). Now i have a lot of information saved in the second one and i need to sync it with pc without using usb cable. I have planned to substitute pim.vol file of the first one with the second, then i will connect the first one to usb and finally sync. But this green screen really make me dissappointed.
Can anyone help me on this matter.
Thank you for all (at least for reading my problem)
Click to expand...
Click to collapse
use the buttons to navigate to the screen alignment setting...[press the windows key, navigete to settings and click, scroll to bottom tab system, click on screen. Navigate to align screen and click, then use stylus to recalibrate. Hope it works.
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...