Hi,
I just purchased the htc 8125 from cingular at full retail WITHOUT a plan
for use on my trips to Hong Kong using my sim card from a Hong Kong
provider.
While in the USA I would like to use the 8125 to access the internet without
a sim card installed and without cingular service. Wifi does recognize available
networks but I cant open any web pages.
Can you please tell me how to configure the phone to do this. I believe it is
by default programmed to use cingular's access services but I want to configure it to work as a stand alone device similar to a laptop looking for wifi signals to connect to the web.
Please help! Thank you.
David
WiFi is not configured to be used with anything of cingular...WiFi is a standalone feature in the PDA...the reason that you couldn't see a web page could possibly mean that the network you connected to had a WEP encryption...u must connect to an open network in order for it to work...
try this
I have been having problems with my wifi too...the only way that I can get it to work is to say the wifi connects to 'work' and to say that programs connecting to the internet should connect using 'My Work Network'
Turn on your WiFi
Start->Settings->'Connections' tab->WiFi or Network Cards->tap the network you want to use->under 'connects to:' chose: 'Work'->next->next->finish->ok
Start->Settings->'Connections' tab-> Connections->'Advanced' tab->programs connecting to the internet should connect using: 'My Work Network'->ok
hope this will work for you and if anyone knows how I can get around having to change this every time I want to go from GPRS to WiFi I would be much appreciated.
Haha - I just found it...someone else just posted it
http://forum.xda-developers.com/showthread.php?p=1179478
Related
Hi all,
I have an XDAII from the Spanish carrier Movistar (TSM500). I want the device to access internet. I have WIFI in my office, so I would like to use this infrastructure in the device instead of GPRS.
I have a SDIO card from SOCKET that works correctly with the device and I can connect internet via proxy.
I would like to know how must I configure the connection settings in order to make it transparent. I mean, if there is WIFI the device must use WIFI it not the device has to use GPRS.
Does anybody know the settings I must to apply to the device network configuration (work,internet…) in order to get this WIFI, GPRS priorities?
Thanks and regards from Spain
...and to make your question more complicated, to setup wifi with proxy, gprs with no proxy and mms connection with no proxy. All these together?
so be it - manemoi
T,
Exactly!
Hey Manemoi, that's EXACTLY What I would like!
Is there a way to have the Magician choose this automatically? For instance, I can use my Sandisk SD WiFi 256 only when I set both my ISP and Work settings to an emtpy profile. It then seems to know it should use the WiFi connection available. I can then Internet, send mail Everything! Perfect! When I take out my WiFi card and activate my Active Synch with BlueTooth, it works too, Can internet over Active Synch without problems. But Mail will connect but then not send mail for some reason...
Whenever I want to use GPRS, I gave to goto connections and then manually change the modems there for ISP to my GPRS Modem Setting. Isn't there an easier way? Can't Internet explorer be told to use whatever conection available? Instead of ALWAYS connection to whatever is set under the My ISP setting?
I'd be interested if you ever got an answer to this as I am now at the same point
I'd be interested if you ever got an answer to this as I am now at the same point
Anyon e work this out?
How do you select what network connection to use? 99% of the time I only ever want the phone to connect to the internet over Wifi (or bluetooth/cable connection to the computer) and not using Cingular's network. There is the occasional time that I would like to enable that but most of the time I want to only use the Wifi. Where can I set so it doesn't connect to Cingular accidentally (say if I'm out of Wifi range or hit the wrong button) so i don't get large data charges?
Thanks
In connexion option set default internet connexion as "my work network" and privat network default as "my work network" as well.
So lemme just confirm something - unless I configure server settings on the a HTC TyTN (using stock rom) on the Cingular network - it will not be able to use Cingulars network right? The only time I will be able to access the internet with the phone is over wifi, bluetooth connection (or USB) with an internet enabled computer. Otherwise the internet will not function and I will not be charged data charges correct?
I don't really ever find myself using the internet on a phone when I'm away from home so I can't justify the expense of the data service but I work on a few websites that I'd like to look good on a cellphone so that's my main reason for wanting internet access on it - so while I'm at work I can log into the wifi system and test the site while I'm tweaking the code.
Am I correct in assuming that I shouldn't be charged under this situation?
Hi, I'm on Vodafone and I made the changes fun_key posted without noting down the original settings. Please can someone tell me what the default settings are for internet connection and private network connection. Thanks
I have been reading this forum and many others all day about the wifi problems people are having but none are like mine so I would like to ask this question, I turn on wifi and it will not find my network or any network around. I have tried to manually put in the ssid and ip address and still it will not connect that way either. I have checked and double checked all my router setting (currently set to open with no wep or anything) I am begining to wonder if the wifi is broken? My second problem I have found it when I change the connection setting to my isp I cannot connect to the internet. Maybe a bad setting, I am not really sure. Any help would be appreciated. Thanks
is your router set to broadcast the ssid? if not then that is the problem. if this option is not enabled then no one can see your router.
as far as connecting via a cell connection, make sure you are using an operator cab. I am sure if you do a simple search you will be able to find a cab that will load all of the proper setting for a cellular internet connection.
who is your provider?
Yes, my router does bradcast the ssid and I have four computers and printers that find it without anyproblems. When i turn on wi-fi the phone doesn't even search for a network the icon shows up but I don't get the arrow that go back on forth to show that it is searching or connecting.
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
puremc said:
I am also having a problem with my 8525. I do get connected but i cant browse the net. Can someone tell me how to setup a connection from scratch to connect to wifi. Thanks
Click to expand...
Click to collapse
Search around on the Hermes forum. IE doesn't know to use the WiFi connection when it's available. There's a registry key setting that needs to be changed in order for IE to make use of the WiFi connection rather than going out over your data connection with your carrier.
I have a non branded TyTn, running on Schap's 4.31 ROM.
Now, this is the problem.
My TyTn locates a WiFI ntework and connects onto it.
Then, I start IE and try to load a page. But, in the progress bar stands ''Locating'' for some time and then it says ''Cannot locate the page. Try again later.''
And any other app using internet connection won't load. Like, Airscanner AntiVirus when I try to update.
I've tried loads of sonnection settings combinations, like, selecting My ISP, My Work network for ''Apps that connect to Internet should connect using''
Could anyone give me a fair solution or at least could someone who has got his IE to work to write down his connetion settings for me to try.
I am getting desperate, since the main reason for buying a TyTN was WiFI.
Someone suggested that I select My ISP, but there's catch: when enter to edit the My ISP, under the tab 'Modem' there is not a single connection listed even when I'm hooked up on a WIFI network. Should there be something in that list? Maybe that's the issue.
And in >start>settings>connestions there is no Network cards icon at all.
PLEASE, ANYONE!
depend on your network really
if you can check if gateway and dns are the same as
on your computer
and of cause if you are not getting your internet from the router
but from internet sharing your gateway could be required to be set
manualy to the computer sharing the internet
The problem is that it happens even on a wifi free spot, not only my home network.
How to setup gateway and dns on the phone?
One question: under My ISP, tab Modem, does any of you have listed the wireless modem of your device? I have absoluetly no modems listed there, maybe that's causing the problem. And when I try to add one, it offers me only Bluetooth, cell line, Cell line( GPRS, 3G), IrDA, Haynes compatible on COM1; no TIACXWLN1, which is the name for the wireless modem on TyTN.
Maybe, a different Radio ROM upgrade would help? Could it be the radio ROM?
My radio version is 1.48.00.10
I had the same problem as yours previously on my other PDAs and Smartphone.
I simply hard-reset the device or re-flash a ROM
Start> Programs> Proxy Manager
Disable your provider... Give that a go...
Please don't kill me but I want to know
HOW to make use WiFi instead of network on browsers and mail, once I connect?
once you connect you to a wifi network it should be just like using wifi on your computer.
a more specific question or example may allow someone to help you more.
The phone uses Wifi where possible by default. However as my push mail is running over the Vodafone Internet APN I have found some occasions where my browsing session wasn't using Wifi.
So I created my own homepage which tells me the IP address I'm on and works out if it's my wifi router or the Vodafone Internet. It also has all my bookmarks, which is a better than the built in solution from Opera.
If you aren't using the GPRS all day, try NoData which can block all GPRS usage.
artesea said:
The phone uses Wifi where possible by default. However as my push mail is running over the Vodafone Internet APN I have found some occasions where my browsing session wasn't using Wifi.
So I created my own homepage which tells me the IP address I'm on and works out if it's my wifi router or the Vodafone Internet. It also has all my bookmarks, which is a better than the built in solution from Opera.
If you aren't using the GPRS all day, try NoData which can block all GPRS usage.
Click to expand...
Click to collapse
Aha, the old friend from MySymbian
Well I'll try that NoData but good to hear X1 wants to use it by default (when connected). I don't use any push messages.
It's a Vodafone ROM thing. if you flash to another ROM it will work fine.
WiFi problem
No man, I have a Vodafone UK Xperia. problem with Wifi initially, then I've ROM it to the generic UK version...now it connects to Wifi but I cannot browse anything with it. The pages don't load and status keeps saying 'loading...' but nothing happens and after a min or so, a message saying that I have to check my internet connection...not connected!
OoLoLo said:
No man, I have a Vodafone UK Xperia. problem with Wifi initially, then I've ROM it to the generic UK version...now it connects to Wifi but I cannot browse anything with it. The pages don't load and status keeps saying 'loading...' but nothing happens and after a min or so, a message saying that I have to check my internet connection...not connected!
Click to expand...
Click to collapse
Then you have your Wifi settings incorrect.
How come u say my Wifi settings are incorrect? How can I correct it? In wat way? my laptop etc connects to the Wifi fine...and the phone as well...but it just that the phone doesnt seem to load anything from internet when I'm connected.
First Check if you used the correct Key for your wifi if thats fine then ....
I've never had this problem with the xperia but I have had with other windows mobile phones it was probable because of older versions of windows mobile, if wifi is connected fine go to Settings -> Connections Tab -> Connections -> Advanced Tab -> Select Networks, then select My Network for both drop downs.
OoLoLo said:
How come u say my Wifi settings are incorrect? How can I correct it? In wat way? my laptop etc connects to the Wifi fine...and the phone as well...but it just that the phone doesnt seem to load anything from internet when I'm connected.
Click to expand...
Click to collapse
Because you are unable to surf the internet, which points to either the settings entered incorrectly (normally when using WEP) or your router needs a firmware upgrade.
Ok here's a complete answer to my question
HOW to make X1 to connect to WiFi ONLY:
Install NoData (thanks for tip!!!)
Turn this on to NOT transfer any network data.
All the browsers I tried (Opera Mini 4.2, Opera Mobile 9.5)
automatically connect by WiFi, so it's great.
Email NOT. But it's enough to
go to email account settings and in advanced server settings instead of your providers network
choose "The Internet".
Violaa, the email account also connects through WiFi.
Hope that helps somebody
Where do i get no data please
There's one topic here called no data cab file!!
Just find it and it's there!
i got problems with my fritzbox 7270, too.
but i solved it.
just set the 802 adaptor manual to your wifi settings.
free ip adress in your segment, gateway, nameserver.
i think its a dhcp problem, with my 7270.