Hi
I've decided to open a new thread in order to correctly explain what I'm experiencing.
This morning I received a new unbranded HTC HD2 and the first thing I did was install HSPL ( ) using this guide. The setup was completed without any error under Windows Seven 64-bit.
After that I tried to flash a new rom, the Laurentius26 HD2 [LEO] V1 WWE Ultimate serie, but the installation stopped at 9% with the error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Error [290]: invalid command
This Update Utility cannot be used for your PDA Phone. Please check your Update Utility
Click to expand...
Click to collapse
and this is what Leo shown:
It was stucked at 9%.
So I tried to reset but the device didn't turn on
This is what the boot loader shows me
without underscores
_______________________RUUNBH
PB81100___HX-BC
SPL-1.42.__hspl___XD
________________0x05
CotullaHSPL______0x30
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Then I decided to download and flash the italian 1.43 stock rom, but the setup stopped at 9% (via USB). I did the same via SD (SanDisk MicroSD 2GB), but the result was the same.
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
Update Terminate
UPDATE FAIL
Click to expand...
Click to collapse
I've tried everything: I did many researches about RUUNBH, error 290, BSA fail, and bricked Leo... I tried using a goldcard (made using the latest QMAT build) and the latest MTTY drivers for Windows Seven 64-bit... but still I don't manage to install a stock rom!
Do you know what's happening?
Thanks in advice!
*** what I've already tried to do ***
- hard reset - failed
- flash a stock ITA rom via activesync USB - failed
- flash a stock ITA rom via bootloader USB - failed
- flash a stock ITA rom via SD - failed
- flash a stock ITA rom via SSPL - failed
- flash a stock ITA rom via goldcard - failed
- download different stock rom - failed
- connect using MTTY drivers - failed
- change PC and USB port - failed
- use a different OS (Windows XP Mode under Seven) - failed
- disabled UAC, firewall and antivirus - failed
- use a different SD car (fat32 formatted) - failed
- install XP on a different partition. Make a new Goldcard using "Duttys Leo Sense 2.5 Multi-Lang" - failed
- recover original SPL and send the phone to the customer service. HD2 returned with radio still bricked. EPIC FAIL
*** UPDATE ***
So this is the point: radio is bricked due to a bad flash. If I install a rom with a radio the flash operation fails.
With the radio bricked there are only two things you can try to do:
1- You can go on using your hd2 without updating the radio. Try to download a rom without radio and install it, or ask a cook to prepare a rom (you can try an official rom if you want to recover the original SPL) without radio for you.
2 - Do what I did and sell the phone as bricked, because there's no way to unbrick radio system. I tried to save my HD2 by recovering the original SPL and sending the phone to the htc customer service. I got the phone back after 2 months and it was still radio bricked
Did you tried with a goldcard inside your leo, to go in bootloader mode and to launch official ROM from your PC ?
Have you renamed the image LEOIMG.nbh when flashing from sd card
try using a different windows...
baaggzz said:
Did you tried with a goldcard inside your leo, to go in bootloader mode and to launch official ROM from your PC ?
Click to expand...
Click to collapse
tried
richie_jones said:
Have you renamed the image LEOIMG.nbh when flashing from sd card
Click to expand...
Click to collapse
of course!
richie_jones said:
try using a different windows...
Click to expand...
Click to collapse
I don't think it's a windows problem
Test flash from another PC system and anothe sync. cable.
Another OS from which are you flashing will resolve this.
I've tried with windows seven 32-bit but nothing changed!
If it's related to the OS I don't understand why goldcard doesn't work..
Do you think I should try xp?
and with a cooked ROM & soft SPL ?
SSPL... no, I haven't try it yet...
i don't know if you can directly from bootloader, but maybe...
I'll install Windows XP Mode for Seven and I'll Try the SSPL. I'll let you know
Your bootloader is okay, otherwise you can't get into bootloader.
The 1.42.HSPL etc text is like normal.
If you see SERIAL in bootloader then USB cable is not connected or not connected properly. In this state of bootloader you should be able to flash from pc. After connecting cable properly you should see USB instead of SERIAL, then start loading the ROM.
From the screenshot is appears radio and os both corrupt due to incomplete flash. I think HSPL may save your HD2.
I would suggest to use Windows XP for flashing..
Eh, why would you use SSPL when HSPL is on HD2? First start with flashing a stock ROM which device should accept at any time, so no cooked ROM or stock ROM in different language.
Go to HTC.com and download the original rom (using ur HD2 Serial Number)
Extract the EXE file using winrar and take the NBH file from
Rename it to leoimg.nbh, copy it to ur SD card, flash ur HD2 and ENOY!
WBR
Siemens Lover
_JuSteR_;
Are you connect your HD2 to PC via USB Hub ?? Or front USB connections of case ? You must connect USB cable to USB port directly ...
_JuSteR_ said:
I'll install Windows XP Mode for Seven and I'll Try the SSPL. I'll let you know
Click to expand...
Click to collapse
there's no need
sspl works fine with windows 7, you don't need to change a thing.n It's already set to run as administrator
I've used it quite a lot on win7 enterprise 64 bit
just make sure you let it load the drivers first time it connects in bootloader mode..
and let it through any firewalls you may have..
I have to say that this It's not my first flash. I've already flashed Cruise, Diamond, Diamond 2 and HD without any trouble using Win Seven. I know how install a rom from windows, from the bootloader or from the sd card, and that I have to wait for "usb" to apper in order to start flashing when I'm into the boot loader.
What I mean is that I have already done averything you suggested: I've already download the htc official rom from the htc main site and I've already tried to flash it via usb (windows and bootloader) and SD but didn't work. The setup always stopped at 8/9%. I've already changed the usb port and used a different pc, but I've never tried another windows than Seven. I've already disabled UAC, firewall and antivirus...
As htc12345 said I don't think is an HSPL problem 'cause I can get into the bootloader and the HSPL setup was successfully completed also. I think It's "just" a bad flash (RUUNBH) but I don't manage to find a way to fix it...
mayeb the phone is just boned..
Probably should have tried an official rom before putting hspl on..
Hi folks,
I had the same issue 1 day before. same configuration. I have even flashed some roms in several htc machine;
I had to sent my HD2 for warrantly reason I wanted to went back to stock SPL from HSPL. So I follow all instructions given by bepe, falshing the official stock rom (my region, op branded...) after renaming the ruu.nbh.
but nothing to do: no way to get out from bootloader. Error ID vendor and the same message in bootloader than you.
So I flash HSPL twice (the first time didn't work) and from the black screen (your device is still connected by usb) you have to flash a stock rom. The only way to get out in my case.
So the method suggested by bepe to uninstall HSPL didn't work for me. How to go back to SPL 142.0000 stock ?
Hope it help you...
I can't install HSPL another time because I get an error:
"You mast have SPL 1.42.0000 installed on device! Please install it first.
Error Code: 0x400007
Always reference this code for eventual requests"
Disable AntiVirus/Internet Security
Change USB port that you are using for flashing ... try with USB ports at the motherboard backplate in case you have used one mounted on front of the chassis.
Hello,
When I try to flash my radio or ROM I am getting this error:
[ERROR 266]: UPDATE ERROR
The Update Utility cannot get response from your PDA Phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone.
Click to expand...
Click to collapse
I attached a capture to this post.
Here are the details about my actual device:
LEO512 - Orange France
Radio 2.06.51.07
ROM 1.66.406.1 FRE
HSPL3 2.08.HSPL
I actually tried to flash to official ROM WWE 3.14.405.2 and radio 2.15.50.14 but none of them worked out, both failing with the described error. I tried to flash through ActiveSync and through the bootloader. I also tried to remove SD in both situation and I actually do not have SIM card in the phone.
When comes to change the SPL I do not have any problem and can switch smoothly.
When you use ActiveSync is your computer able to connect to youf HD2? If not then try a different USB port as the one you are using must not have the proper drivers for yoir HD2 installed. You can also try another computer and another USB cable.
Thanks.
Changing of USB port definitely solved the problem.
tried every thing erro 264, 266 for me
mine is still stuck i tried all of them
I have madldr 1.11 i just want to upgrade to 1.13 but no upgrade work for me
i dont know wat to do
Yenly said:
mine is still stuck i tried all of them
I have madldr 1.11 i just want to upgrade to 1.13 but no upgrade work for me
i dont know wat to do
Click to expand...
Click to collapse
You can flash MAGLDR via your SD card just like you can a ROM or radio. Just copy the MAGLDR.nbh file in the MAGLDR folder you get when you exstract the zip file you download to the root of your SD card.. Then change the name of the coppied file to leoimg.nbh. Next as you turn your HD2 on hold down the volume down button. You will see the multicolor bootloader screen come up as soon as you see the word "Searching" on the screen let go of the volume down button and follow any on screen instructions. This will flash MAGLDR 1.13 to your HD2.
Just wanted to add that I was having this problem on Win7 64bit, initially windows update tried to grab drivers. It installed something unnamed but still wouldn't run the ROM update. I switched USB ports as suggested above and then Windows Update found a Qualcomm CDMA driver and installed that. This it seems did the trick as I'm now updating.
Greetings to all.
this problem has happened to me too. site (windows) to control said activesync. Then I did it to me ...... I realized that there were some driver conflict of some programs cooking ..... Removed from (windows7) now works perfectly. Thus check the newly installed programs.
Guys, i really need help.
Just got a second hand HD2 yesterday and I plan to install Android via NAND. I only got the point where I successfully installed SPL-2.08.HSPL thru HSPL4.
(I used this thread as my base guide btw, http://forum.xda-developers.com/showthread.php?t=893948)
I can't install a new radio or custom rom because I get Error266 in the RUU. Do I need an original HTC cable proceed?
(As of the moment I only have a Nokia cable that's working in terms of charging and transferring files.)
Here are my software info (hopefully these can help you guys figure out what's wrong with my phone):
OS: 5.2.21869 (21869.5.0.82)
Manila: 2.5.19211619.0
Rom: 1.48.405.2 (71294) WWE
Radio: 2.05.51.05_2
Protocol: 15.28.50.07U
(I got the phone with these installed, the only thing I changed was 2.08.HSPL from 1.42.00)
I really want to update my phone so badly. Please help me
No any brand cable should do as long at it is not defaulty. Try all of your USB ports as some ports like the ports in the back of your computer work better.
Still no progress. I tried all the usb ports and I even borrowed an original htc cable from a friend.
It's really weird that even the latest offical RUU from htc support comes up with the same error. Oh well, I'll try to remove the HSPL and reinstall it again...
jpag12 said:
Still no progress. I tried all the usb ports and I even borrowed an original htc cable from a friend.
It's really weird that even the latest offical RUU from htc support comes up with the same error. Oh well, I'll try to remove the HSPL and reinstall it again...
Click to expand...
Click to collapse
Are you using ActiveSync or Bootloader to flash?
Have you tried flashing via SD card?
Also do you have the latest ActiveSync or WMDC software installed on your computer?
T-Macgnolia said:
Are you using ActiveSync or Bootloader to flash?
Have you tried flashing via SD card?
Also do you have the latest ActiveSync or WMDC software installed on your computer?
Click to expand...
Click to collapse
I used ActiveSync to flash.
I just tried to flash via SD but the "Searching.." text didn't appear.
I installed WMDC yesterday from the Windows site so I'm assuming that it's the updated version.
Idk if I should give up already. Thanks for the help T-Macgnolia, I really appreciate it. At least I have a functioning phone. lol
Hey guys, i have a problem updating radio rom on my HD2. I have Cynagemon7 Typhoon installed, Magldr 1.13 installed, i keep receiving the error. I installed usb drivers (belive its called google usb driver) for the phone, i go to to bootloader and choose USB Flasher. On the Phone it shows that its connected (USB...USB), but i still can not flash it. I think the problem is with Windows Mobile Center, it doesn't show my phone, it show NOT CONNECT on WIN7. Any ideas what might help to solve my problem?
Hi everyone! At first sorry because my english is not better than my french
My problem: I have an HTC hd2 with a white screen and the SPL 1.42.0000 (i can go to bootloader). I google it and can't find any solution, i tried to instal HSPL (with hspl2/3/4) without success (usb fail connection) i have the same error with an task29, and an hd2toolkit. I tried to instal from sdcard but i have the error "radio v2 fail".
I think this is a problem at height of XDA developers ^^
PS:I tried to change Computer or usb port and execute as administrator but nothing...
If you coul help me it will be realy nice.
is the phone recognized in device manager? If not its a driver problem.
also do the usual ( verify its not the usb cable, try different usb port,) if drivers are ok
thank you for your help
The computer recognize the device but without OS (white screen) i can't do anythings with Activesync, i tried other computers and other usb port/cable but nothing. I think isn't a driver's problem because the instalation with sd card don't work.
Anis92 said:
The computer recognize the device but without OS (white screen) i can't do anythings with Activesync, i tried other computers and other usb port/cable but nothing. I think isn't a driver's problem because the instalation with sd card don't work.
Click to expand...
Click to collapse
Don't understand what you mean by "white screen"?
Try installing a stock winmo for you device to make sure everything is ok...
i tried to instal an official htc rom from sd card but it doesn't work, by "white screen" i just wanted to say that when i turn on my phone the screen is white.
It sounds like you have done a Task 29 and you do not have a ROM on your HD2 right now. This is why you just boot to the white screen.
You do npot have to use Active Sync or Windows Mobile Device Center to flash via RUU. You just have to have them installed because the haqve the USB drivers for the HD2's WINCE Bootloader in the programs and they install the drivers when you install the program.
The drivers in Active Sync and WMDC allow you to have a HTC Sync connection in the bootloader. Just boot into the bootloader by holding down the volume down button while powering on yuour HD2. Next connect your HD2 to your computer via USB cable. Wait and watch for the Serial in the white bar of the bootloader to change to USB. When you see USB you can run a RUU.
Now to address your 1.42.0000 SPL, this is a older SPL version and you may have to keep trying different RUUs until you get one that will flash. Just make sure if you have a T-Mobile HD2 that you do not flash any radio version below 2.08.50.?? or any radio version that has a 51 in the radio where the 50 is in the first radio I mentioned, or you will brick your T-Mobile HD2. Look for the radio version in the RUU name it will be there.
Sometimes the HD2 develops what is referred to as a "stuck radio" when they have these early SPL versions like yours. This is why I say you may just have to keep trying different RUUs until you find one that will flash.