my mini sd want's to be format but...
i need all the things that are in there
do you know any program to recovery mini sd?
ps: i have a qteck 9100
Related
The SD Card used for dumping rom with ntrw could no longer be accessed by my notebook which was accessable before(I formatted the SDs already with my mini), it needed to be formatted, after I did that, and plug the SD into my mini, the mini couldnt read it and prompting the SD card needed to be formatted again!
So, I formatted it again with my mini, but after that my Notebook want to format the SD again, and the fight between them keeps going...
anyone encounter the same issue...there are some clues that I tested:
1. I got 3 SD cards, 2 for them used for upgrading and they occured the same problem, but the third one which is clean can be accessed by both machine
2. The SD cards(those with the problem) can be read by my PC's Card reader...
I know I could use the card reader instead, but I dont wana waste the build in one in my notebook and the data exchange between my Notebook and mini is quite important to me, pls if anyone could help me solving the problem, Many thx!
Hey do any of you know how to format an SD Card? I flashed my old rom onto my 2gb sd card and really dont want to let this go to waste. is there a way to reformat this card so that my MDA will recognize it? Thanks in advance for any response.
you can use your pc to reformat a card [if you have a card reader]
or you can use your ppc to do it. resco has a format card thingie. or you can get another app [I use Storage Tools from Softwinter]
Got it. Thanks.
All,
I have a 2gb Sandisk Mini SD Card in my Qtek 9100 and up until today its been working fine. However my Qtek started to behave strange today and suddenly would connect to my pc via ActiveSynch nor could it read the sd card.
Well in fear of loosing all my stuff on the sd card I tried in other phones, on another pc, in my camera....jsut to save it but I couldnt.
I ended up doing a hard reset of the Qtek since I couldnt solve the ActiveSynch issue and now its up and running.
BUT.....my SD card is only on 1gb now. :-( So what can be done ? Format it....yup but I dont have any program to do it with....
Help help help....the next step is to send the sd card back to the company I bought it from but then I'll have to wait for a new one
Please help
Jakob
Well I have just formattet the storage card with StorageTools and when I have the card in my qtek it shows 1gb
But if I put it in my camera and then connect it to my pc I see 2gb....
i had problems on my card and formated using wm5torage from the desktop...and it is working flawlessly, i suggest to do that...but usually that size problems happen in fake cards...do u filled the card some time or at least passed the 1gb limit?
HI all,
I am using a 4GB Mini SD, not SDHC ones, and it happens that my X7500 doesn't read it properly, I mean that it recognizes it but it reads it as full while it isn't so and I can't access to the folder and run applications installed on it either. To have a correct reading of the card, I have to remove and insert it from its slot.
What could it depend from? Any suggestion to solve the problem...considering I tried a format card from pc and ppc both?
THX so much for you help!
Any suggestion?
Hy
i've buyed a 4 gb sd (no sdhc) card
the name of the sd is MICRONICA (an Italian factory)
but my qtek 9090 with wm6 says in memory program/storage card : Not installed
How can i format it (there is a cab for formatting the sd direcly on qtek 9090? (i have not the card reader for pc...)
or a program to use the 4 gb sd card on qtek 9090 as the 1 gb (the last sd card was a 1 gb and goes well...)
thanks in advance
bye
Paolo
u dont need to install any cab to make it works.
If the sd card supported by ur BA, then it will shown in the Settings>Memory>Storage Card screen. Otherwise, I think u need to find another brand of 4GB SD card.
Anth
My sd is this:
http://www.micronicaitalia.it/download/SchedaTecnicaSD-card.pdf
paolone said:
My sd is this:
http://www.micronicaitalia.it/download/SchedaTecnicaSD-card.pdf
Click to expand...
Click to collapse
Best way to format the card would be (as you dont have the external cad reader) to go to a computer shop, look for a laptop with attached card reader and use it.