The SD Card used for dumping rom with ntrw could no longer be accessed by my notebook which was accessable before(I formatted the SDs already with my mini), it needed to be formatted, after I did that, and plug the SD into my mini, the mini couldnt read it and prompting the SD card needed to be formatted again!
So, I formatted it again with my mini, but after that my Notebook want to format the SD again, and the fight between them keeps going...
anyone encounter the same issue...there are some clues that I tested:
1. I got 3 SD cards, 2 for them used for upgrading and they occured the same problem, but the third one which is clean can be accessed by both machine
2. The SD cards(those with the problem) can be read by my PC's Card reader...
I know I could use the card reader instead, but I dont wana waste the build in one in my notebook and the data exchange between my Notebook and mini is quite important to me, pls if anyone could help me solving the problem, Many thx!
Related
I have a 2gb SD card that was working, but I thought I would be clever and use the SD reader in my Tosh so that I could transfer large files more easily to the card for my exec. But when I was asked to format my card by Toshiba's software, I went through the process and thought it was successful. But then at end of process the phrase "Please stop a SD memory card, then insert the card again" came up, so took card out, re-entered it in the reader and tried to attempt to transfer files to it. However windows then told me that it was not formatted and would I like to format it. So yes, I do, but although windows formatted it, it reduced the capacity from 2gb to 956 mb or thereabouts. It was recognised by the exec again, but with severe consequences as never bought a 1 gb card.
Help please...
Sounds to me like your card reader doesn't read cards bigger than 1 GB. I had the same issue with my 4 GB card. Tried it with a different reader and the PC saw all 4 gigs, never asking me to format. See if you can try a newer SD card reader?
The same thing happened to me with a 1 gigabyte pcmcia card. It was working fine in my laptop then I put it in the card slot on an Ipaq and it also did a format. The card is now exactly half the memory it should be and no way can I get it to work as a 1 gig card even though I have tried formatting on the pc.
I have found that my 2GB card formatted on my Palm LifeDrive was not readable on my laptop. When I formatted using a Toshiba format utility the space on the card was down to 1GB. It did work okay on my JJ. I had to re-format it on my Palm and then for reason it was okay again and could be read by my laptop - I did not use any card readers as the laptop has a built-in reader. And I re-formatted on my laptop using XP format softwsre and the 2GB storage was retained.
@Wannabe, have you got access to another PC or card reader to reformat your card. Also I found WM5 file managers could not reformat and regain the lost capacity
been on to Tosh
Toshiba are extremely helpful...not! Told me to get another card and see if that works as it might not accept the card. This is a Sandisk card which I believe is made by Toshiba...or at least in collaboration. Am going to check Sandisk for an answer as well...keep the ideas coming please
Hi there.
Try reading this post i made ages ago about formatting and re-newing your sd cards. It might help. It is regarding my 512mb sd card, but the principles are the same.
http://forum.xda-developers.com/viewtopic.php?t=21920&highlight=lydiachris
I strongly recommend using media recover, even if it's only a trial version to "wipe" your sd card to re-new it to it's factory condition. It covers and re-formats the whole card sector by sector.
http://www.mediarecover.com/
Give it a go and let us know.
Regards
lydiachris
If none of the other suggestions work then try this program that I posted on another thread:-
SDFormatter.zip:
http://forum.xda-developers.com/viewtopic.php?t=30900&highlight=
Use it with a card reader, follow instructions and your PPC should be able to read the full capacity.
SanDisk have taken back card...
Thanks for the suggestions, will keep in mind for future. Sandisk took back the card and found that it had become corrupted so have sent out another one. tks for suggestions though.
Hi all,
I have searched hi and low for the resolution to my problem. I have owned a Magician (sold as Xda II Mini) for just under a year and have a 1Gb SD card (eagletec turbo 66x speed) which has worked beautifully until two days ago
File explorer does not recognise the SD card. I have tried the SD card in other devices (e.g. PC - using a card reader, digital camera, dvd player, my friend's pda etc...) and it works fine.
I have tried inserting different SD cards into the Magician and they all get recognised ok.
I have tried soft reset and hard reset to no avail.
I have formatted the SD card using a card reader on the PC (tried both FAT and FAT32) and also tried formatting it in my digital camera.
When I insert the card into the Magician (from power off state), the Magician does light up indicating to me that there is no problem with the spring load mechanism of the expansion slot. What is strange is that when I go to Settings->System->About, I get 'Expansion Slot: Not in use'
I also tried (after a suggestion in another post) to add a "shim" of plastic of paper on the contact side of the SD card. No use.
I am reluctant to flash the ROM as I have not had any other problems with the Magician to warrant it.
Any ideas?
Have you tried cleaning the contacts of the SD card? Try soft resetting with the SD card in it.
Hi thanks for replying.
Yes I have cleaned the contacts of the SD card and also tried many soft resets with the card in and also with the card out.
????
Hello,
Try formatting your card with a different reader or from a Nikia phone.
Regards
Carty..
I have tried formating the card in several card readers. Still not being recognised is file explorer. Again, the card does work in any other device I put it in - just not my mini
Anyhow, I'll just use a different card for now. Just wondered if any other people had the same issue as I do.
Thanks all.
for me the same **** happened with my new, exchanged, mdac. using the sd card with the previous machine was no problem, now the card is not being recognized at all. using it in notebook, camera ... no problem.
any ideas?
i dont want to start another thread but im having the exact same problem with my MDA Compact II. I have a 1gb Toshiba SD card that wont even work in the MDA but it works fine on my camera and PC. So I would like ot know if there is a solution to this
Thanks
Hi all
I am a newbie and am experiencing the same issue, external sd card not showing up in file explorer.
Sniffer can find it and I can play media files from there. Is this the norm or do I need to change something?
I am using C&C 1.5ghz Froyo Combo VERSION 8 final.
The 16GB card is seen by all other card readers I have tried.
All,
I have a 2gb Sandisk Mini SD Card in my Qtek 9100 and up until today its been working fine. However my Qtek started to behave strange today and suddenly would connect to my pc via ActiveSynch nor could it read the sd card.
Well in fear of loosing all my stuff on the sd card I tried in other phones, on another pc, in my camera....jsut to save it but I couldnt.
I ended up doing a hard reset of the Qtek since I couldnt solve the ActiveSynch issue and now its up and running.
BUT.....my SD card is only on 1gb now. :-( So what can be done ? Format it....yup but I dont have any program to do it with....
Help help help....the next step is to send the sd card back to the company I bought it from but then I'll have to wait for a new one
Please help
Jakob
Well I have just formattet the storage card with StorageTools and when I have the card in my qtek it shows 1gb
But if I put it in my camera and then connect it to my pc I see 2gb....
i had problems on my card and formated using wm5torage from the desktop...and it is working flawlessly, i suggest to do that...but usually that size problems happen in fake cards...do u filled the card some time or at least passed the 1gb limit?
Hello! Although this is my first post on the forums, I have been reading extensively through these forums for the past ferw weeks since my acquisition of my new to me MDA (i.e wizard G3). Yesterday, I took out the sd card for a few hours and now when I put the card back in the wizard is not recognizing the sd card in the file explorer. I put the card in the PC and it is recognized fine there. I reformatted the sd card via FAT and inserted it back into the wizard but no luck. I soft reset the phone several times but in vain. I then eventually hard reset the wizard and THEN inserted the sd card but still not read. I tried going through the My computer--> Manage --> Disk Management but the sd card is not showing up on it.
The sd card is clicking in and out fine from the wizard. Any help would be greatly appreciated. All my medical programs were on the SD card. And with that many programs I cant just work off of the memory.
Thanks in advance
Sohaib
update
I installed the wm5storage and the program does not recognize the sd card either
Update
-Tried formatting to FAT with computer and re inserting did not work
-Tried Formatting with WM5storage and THAT didnt work either
-CID unlocked the phone, installed 3.08 ROM, and then "Crossbow reloaded" with 2,19 UK Radio Rom, tried inserting the sd card and still not work
-Tried formatting with "Flash Format" and the program says "no storage card detected"
I am thinking that I may have damaged the pins or something when I was reinserting the SD card, initially when I noticed the problem
2 options in front of me now!
1. buy another mini SD card and see if that works
2. Open up the Wizard to see if it is a hardware issue
Opinions etc would be greatly appreciated
thanks
sohaib
Ive got the same problem with my Qtek 9100
hi i had a near identical problem occur with my xda mini, as in after removing and reinserting my sd card it was not being recognized. i happened to have a old mini sd card (only 64mb tho!) and that was recognized. so i just bought another 2gb sd and its been fine ever since, but saying that i have not removed it from my mini yet! which is getting a little annoying now as i was given a copilot kit and the software is on a mini sd card
Try removing all formatting and then allow the phone to format your card. I had a problem with my second MiniSD card after formatting on my PC.
Insert your card into your card reader. Right click "My Computer" and click on "Manage". Then left click "Disk Management", find your card and delete the partition. At this point, you can then stick the card into the phone and it will ask if you would like to format the card. Even though the computer will not recognize the card, your phone will.
Snapin Disabled
I tried the approach of right click my computer--> manage --> disk management --> but it tells me that the snappin is disabled and when I go into start--> run--> gpedit.msc --> to enable the disk management it still does not recognize my storage card in the disk management. Hence I am unable to remove the partition.
Thanks for the replies guys, any suggestions on how to enable the specific snapin on XP?
Thanks
Sohaib
New Mini SD Card
OK, so in attempts to diagnose the problem, I went out today and purchased another 1gb minisd card, inserted it into the wizard and................NOTHING. Still no luck. Does this narrow down to the problem to a hardware pin related issue? Or could this still be a software problem. I figured that a new sd card may resolve the issue but unfortunately not, any suggestions would be greatly appreciated.
Thanks
Sohaib
Bump
Ideas? Suggestions? Recommendations?
Thanks in advance
Sohaib
If you tried another card and a new ROM, I would say it is a hardware issue, if it's still under warrantee then I would send it in. If it's not and you want to try to fix it yourself, there is the HTC wizard maintenance manual (Google search) that will give you step by step instructions on how to disassemble it. Or sell it on eBay then use the money to buy a new one.
I searched the forum, Google and whatnot. But no solution seemed to help me with this problem. About a week ago my MicroSD card dissappeard on my Touch HD. I removed the SD card, put it back in and it was there again. The next day, it happened to me again. I tried to do the same as I did before, but this wouldn't help.
I have changed the registry according to this page right here, but that didn't help either.
Now thinking it was a ROM problem, I upgraded to Miri's v15 and the problem is still there. Then again I changed the registry values. But my SD Card is still missing. Does this mean my SD card is broken? Or does anybody have an other solution that might work?
Thanks in advance!
SD
Formatage sd Doit Etre Suffisant (FAT 32)
Seems your SD card is broken, the same happend to me some time back.
I'm not sure if you understood the non English post above, but it seems they are suggesting the same as I'm about to.
Try to format your sd card on your pc using a card reader. Format it to FAT32. If you are lucky you may still be able to retrieve the data off of it via the pc, if so back it up to your pc, format the card and then you can transfer the data back.
It does sound like those above have suggested. You'll need to format your SD Card. Make sure you backup whatever files you have on it first
I recognize the problem, I've also had this, first check your sd card for the problem, those things are very fragile...
android
Hi, thbis happend to me when i was testing android, I lst all my data but was able to repair it and get it working intermittently by reformatting it. It turned out to be the shelby ROM I was using as when I reflashed with a different ROM the problem went away, it may have been android that corrupted the driver or something but starting from scratch with a new rom and reformatted card worked for me.
Thanks for your support. Today I formatted my MicroSD card with a Nokia phone. This phone recognized my SD Card AND all of the files that where on there. Replacing my SD card with the one in the Nokia gave me the same problem. My Touch HD wouldn't recognize the SD Card. So I guess it's a problem with my Touch HD then?
Knowing that the registry edit didn't work, what else can I try? Don't really feel like flashing to a stock rom and sending it to HTC...
*bump* anyone ? My MicroSD card still isn't working
You checked for bent pins or some form of obstruction in the microsd slot? If you tried another card and same problem then it's going to be the device somehow.
I did a hard reset on my Touch HD. It works.