I have a 2gb SD card that was working, but I thought I would be clever and use the SD reader in my Tosh so that I could transfer large files more easily to the card for my exec. But when I was asked to format my card by Toshiba's software, I went through the process and thought it was successful. But then at end of process the phrase "Please stop a SD memory card, then insert the card again" came up, so took card out, re-entered it in the reader and tried to attempt to transfer files to it. However windows then told me that it was not formatted and would I like to format it. So yes, I do, but although windows formatted it, it reduced the capacity from 2gb to 956 mb or thereabouts. It was recognised by the exec again, but with severe consequences as never bought a 1 gb card.
Help please...
Sounds to me like your card reader doesn't read cards bigger than 1 GB. I had the same issue with my 4 GB card. Tried it with a different reader and the PC saw all 4 gigs, never asking me to format. See if you can try a newer SD card reader?
The same thing happened to me with a 1 gigabyte pcmcia card. It was working fine in my laptop then I put it in the card slot on an Ipaq and it also did a format. The card is now exactly half the memory it should be and no way can I get it to work as a 1 gig card even though I have tried formatting on the pc.
I have found that my 2GB card formatted on my Palm LifeDrive was not readable on my laptop. When I formatted using a Toshiba format utility the space on the card was down to 1GB. It did work okay on my JJ. I had to re-format it on my Palm and then for reason it was okay again and could be read by my laptop - I did not use any card readers as the laptop has a built-in reader. And I re-formatted on my laptop using XP format softwsre and the 2GB storage was retained.
@Wannabe, have you got access to another PC or card reader to reformat your card. Also I found WM5 file managers could not reformat and regain the lost capacity
been on to Tosh
Toshiba are extremely helpful...not! Told me to get another card and see if that works as it might not accept the card. This is a Sandisk card which I believe is made by Toshiba...or at least in collaboration. Am going to check Sandisk for an answer as well...keep the ideas coming please
Hi there.
Try reading this post i made ages ago about formatting and re-newing your sd cards. It might help. It is regarding my 512mb sd card, but the principles are the same.
http://forum.xda-developers.com/viewtopic.php?t=21920&highlight=lydiachris
I strongly recommend using media recover, even if it's only a trial version to "wipe" your sd card to re-new it to it's factory condition. It covers and re-formats the whole card sector by sector.
http://www.mediarecover.com/
Give it a go and let us know.
Regards
lydiachris
If none of the other suggestions work then try this program that I posted on another thread:-
SDFormatter.zip:
http://forum.xda-developers.com/viewtopic.php?t=30900&highlight=
Use it with a card reader, follow instructions and your PPC should be able to read the full capacity.
SanDisk have taken back card...
Thanks for the suggestions, will keep in mind for future. Sandisk took back the card and found that it had become corrupted so have sent out another one. tks for suggestions though.
Related
I have a 512 SD memory card, which when initially placed into my MDA compact was working fine. I have transferred files via activesync and the MDA was reading it at 512mb.
However, a couple of weeks ago. I had a message on the MDA asking if I would like to format the card for reading by this device. Initially I said no, however, it kept on coming up persistently until I clicked yes.
The format was done and I am now showing a size on my SD card of 139mb.
I have seen some of the previous posts and have bought a SD reader/writer, whilst this works perfectly, my card is still only 139mb. I have a feeling that the movie I transferred is taking up the rest of the memory, but not showing anywhere for me to remove it.
Does anyone have any suggestions, other than gentle pursasion with a hammer, to return the card to its proper size. Free would be best of course.
Thanks
In windows (your desktop computer) enable the option "view-hidden files"... perhaps you will find a lot of hidden files on your sd.
Otherwise, format the sd.
Sven,
Thanks for your response, tried hidden files, no luck. Also formatted the sd card and it still only reads 139mb. Shall I hit it with a hammer?
Cheers
Mark
adz1478,
Unzip the attachment onto your computer...
With your SD card in a card reader, format the card.
You should hopefully retreive full capacity- needless to say everything saved on the card will be gone.
worked perfectly, you just saved me £20 on a new card. Cheers
worked perfectly, you just saved me £20 on a new card. Cheers
Click to expand...
Click to collapse
Yep- no probs.
When you try to format the card from Windows- it does not always comply with the SD 1.1 specs. This is what the formatter program does.
Same problem - but!
When I tried the formatter program it thinks the card is write protected even though on the outside it is not! So i can't format it to the correct side.
Any ideas please?
I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
Today I received my 2GB Sandisk miniSD card from eCost (they sell it for real cheap so I thought I get one). I formatted it with XP (using its supplied SD placeholder) to FAT32. After I placed it on the PDA it reported the following crazy results:
2 GB storage
960 MB used
970 MBs free
In other words, my Wizard (running the latest AKU2 QTek ROM from ~March 22 2006) sees the full 2GB, but can only use 1 GB!!!
I then tried to format it with XP using FAT16, but the SAME problem occured.
Thankfully, I downloaded this utility: http://pocketgear.com/software_detail.asp?id=3191 and I did a "repair" (or format) the miniSD via the PocketPC. THIS utility saved the day! It fromatted the miniSD card correctly! And now I can see and use ALL of the card.
Please note that the problem/bug might not be with XP or the PPC. It might be with the actual SD placeholder, or even the flash reader (hardware bugs). The point is, that somewhere along the way something gets screwed during the formatting. So, if you buy a miniSD 2GB and you get such or other problems, download the StorageTools utility linked above to format (or use "repair") the miniSD card directly in the PocketPC instead of using XP and a SD-placeholder/flash-reader.
BTW, I also posted a review of the QTek 9100 yesterday: http://tuxtops.com/node/749
wow! I'm reading your post and thinking I wrote it! I had the EXACT same problem. I tried another utility (that made my miniSD card unrecognizable to my kjam).....a quick format with my pc, and I was back to only about 1gb of usable space....then i stumbled across storage tools. I ran the repair, and it was fixed! ahhhhh 2gb of space....woohoo!
Same problem, diffrent solution...
I also had the same problem, but found another solution, after trying to reformat, both in ppc and pc and cardreader in printer, card was unreadable by all devices. Therefore, as a last resort, I put the card in my digital camera (nikon s2) wich recogniced the card as unformatted and kindly asked if I would like to format it... after that it worked perfectly
help!!
i got the same problem with my 2G sd card..
i formatted with my PC and now it show only 975mb in my card!!!!!!!!!
i had try to use the StorageTools to repair it via my XDA mini s.. but it still show 975MB.... any idea???
After you used StorageTools to repair the miniSD card, you need to do a soft reset for the PocketPC to recognize the rest of the card.
However, I must tell you, the only clear deal is to FORMAT the card WITH StorageTools and NOT to simply just do a repair.
Hey I have this same problem, but the link to the program is no longer any good. Does anyone know what the name of the application was.
Thanks,
Bought new card
OK- Now I do not know what to do. I just went out and bought a new 2GB scan Disk MiniSD card. When I went to install my data on it, I can only get 1GB on the card. I need 2 GB. Does anyone have any ideas on how to fix this. I thought the last card was bad, but I guess not. This happens on 8125 and in Windows. Both see the card as 2 GB but will error out when you try to add more than 1 GB.
Please help.
Thanks,
The name is that one: storagetools...
I had the same problem and using just the evaluation version of the program was good enough to format mi sd and everything it's ok!
http://storagetools.softonic.com/pocketpc
what is a better format for MiniSD 1G (prob:read/writes slow)
I have a problem with my miniSD card reading and writing WAY too slow.
I think that may have happened when I formated the card as FAT32 partition instead of FAT. This thread seems like it is a helpfull answer, but which would read and write better? Does anyone know?
Thanx in advance.
Hi,
i have a new sandisk 2GB microSD card in my hermes. Because i have no card reader for my pc i want to format the card in my hermes.
Is it possible to do so? I cant found any option for formating.
The hermes says in settings >> memory that no card is installed.
I thing it is because the card is unformated.
I do so, but there is no storage card.
The mobile device also says that there is no storage card.
I know that Resco File explorer can format the card but most cards are formatted fat by default. The Hermes at least recognises this. If you're not even getting the sd card recognised then there may be either a problem with the card or with the Hermes.
It would be best to just fork over a few bucks and get a card reader for the pc as if the pc is recognising the sd card that means that the Hermes may have a problem. Try formatting FAT32 anywaty then put back into Hermes. May work.
If the pc doesn't recognise the sd card, does happen that new cards go bang, then I'd suggest taking the card back and getting a new one.
Cheers...
8gB micro SD
Hello,
I have the same problem. My 1gB card works fine in my Hermes but the new 8gB is not recognized. Spec says phone can only take maximum of 2gB but other forums say can use 32gB. My latest clue is that the card was preformatted with FAT32 and the Hermes requires FAT. However FAT can only deal with Volumes up to 4gB. So I stumped.
If you read a bit further you'd realise that these people with 32 Gb cards run custom roms which have the patch applied...
There is a cab file running around that allows you to run sdhc cards on WM 5/6 but I can't remember what its called (try sdhc patch in search)...
I have been using a 4GB micro Sd card for some time now.
But decided id fork out for a 16GB atlast.
Fitted the 16GB last night, No problem, Bought FPSECE 0.10 support version and a few games.
Today at work, Lunch time I pulled out my htc hd2 to enjoy abit of gaming and showing off the phone, But the Sd card was not found. I restarted the phone several times, tried everything, then decided I would format the phone.
After a format, The card was found again! yay I thought, but lunch was over so,now im home from work, The SD card is no longer read... I have now tried my 2GB micro SD card, My 4GB Micro SD card and my 16GB Micro SD card, All of which wont detect in the HD2, But will in my ORBIT 2 and PC card reader.
Is it a software fault, Or a hardware fault?
Thanks
Ok
Just formatted the phone again. Instantly the Sd card was readable.
So I formatted the card from the phone..Now just hoping for the best.
My guess is some software must have had a bug or virus or something blocking the sd card from being read on the hd2.
Odd.
Its SW problem not HW. I had a same prob after I installed the " tnyynt SD TuneUp " tweak. You just need to find what it is in your phone.Not easy task
Try different ROM-easier way
16gb sdhc card failed after restart.
When it is working (Straight after format) put anything more than 500mb of data on it and it screws up!
Data transfere is around 300kb/s!!! takes the monkey abit.
Then after a soft reset, Its gone again.
I conclude the SD card is defective. I shall be getting a refund.