For some reason connecting any wired headset, even the original one does not enable the microphone on the headset. The mic on the phone is still active, so I put the phone in my pocket and no one can hear me..Can't seem to find any posts or info on the topic. Anybody have any ideas?
Thanks
Im a bit late but I have a similar problem: Wehn I pick up the phone by pressing the button on the headset the micro is not on. However when I dis- and reconnect the headset it suddenly does work. I use Farias final crossbow rom. What can be done to fix this problem?
Hope someone can help me with my problem (Nothing found on XDA search).
I have a BT620s headset and it works great, both for stereo music and as a handsfree set.
The problem is, if I disconnect the bluetooth or answer a call I always loose the Wireless stereo. Under the BT devices is it still shows as selected but I always have to do a refresh reselect "wireless stereo" and save it again to get it working each time.
Is there something I can do to make it stick ie: registry setting?
Thanks
confirmed
Hi to All,
i have exactly the same problem. Actually, in my case even an alarm or a reminder switches the A2DP to mono and i am not able to go back to stereo without a soft reset....
Anyone have an idea?
I need some help here and I have tried searching but couldn't find anything relevant. I am using WM5 on a Cingular 8525.
I recently purchased a Jabra BT8010 and have been having a few issues:
1) My phone no longer turns off automatically (i.e. on standby) after the specified time in Power Management. Is there a fix?
2) The audio still skips when listening to music after installing Sleuth's A2DPfix. I found that if I reduce the BT audio quality to High using HTCTweaks I usually don't get any skipping (without Sleuth's fix). What is the best A2DP setting for WM5? I know there is a thread for WM6 A2DP settings but does it apply also for WM5?
No one has any info?
Come on guys. I really need some feedback on on Issue #1 because I usually like to leave my cell phone in my bag so right now I have to take my phone out everytime I complete a call to turn it off.
Nobody knows anything??
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
I just got a TMOUS HD2 and had the same problems a lot of other people are having connecting it to my car. It connects to the car correctly, downloads the address book, but no sound comes through the cars speakers and the call doesn't register on the cars phone display. I searched XDA and there seems to be a bunch of registry change posts that don't seem to work all the time and disable some features. By doing the following I get it to work consistently with all the features enabled.
1) Turn off the data connection and Bluetooth in Comm Mgr
2) Turn on Bluetooth and connect (or pair) the phone with the car
3) Make a call
4) While in the call, turn the data connection back on
It works for my Land Rover RRS and stays working until I reset the phone. After I reset, I just go through the above procedure again.
I don't know if it works for every car make but it should work for most Volvos, Jaguars, and Land Rovers since most of them use common bluetooth systems.
Hope this helps somebody.
I am having the same issue. I have to manually connect the music stream. The phone stream always connects. Hoping for a fix from T-Mobile.
kevev said:
I am having the same issue. I have to manually connect the music stream. The phone stream always connects. Hoping for a fix from T-Mobile.
Click to expand...
Click to collapse
My car doesn't support A2DP - the phone's separate from the audio head. All the car's phone features work though - voice recognition, conference calling, transfer to and from the handset, and address book and digit dial. I wouldn't hold my breath for a fix though. It's the WIDCOMM Bluetooth stack that HTC started using with the TP2 so there are over a year's worth of complaints logged with HTC and no sign of a fix.
well, not much to be said for the Microsoft bluetooth stack either. I have a 2010 LR4 and can't get my HTC Raphael/Touch Pro/Fuze to keep a connection. Hard to know what the problem is, starting a WiFi or GPS session often resets the connection, in addition to the random drops, sometimes mid-call.
When I tried an iPhone though, it worked fine, naturally.