So I installed Opera.
Then when I get an email with a link on it and I click on it I get the following error:
OperaLauch.exe
The file 'OperaLaunch' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
A quick look at the Opera folder shows no file under that name. So out of curiosity I went and did a search on the web. Found only two sites talking about this but they are both in Russian. Great.
So obviously the line in the registry that points towards opening links is pointing to this program. I did a quick search and found a number of registry entries that would normally point to PIE but are not pointing to Opera.
Now I was wondering who here knows the registry entry to open items in Pocket Outlook so it uses PIE. Or even better how to make it work so it opens Opera as the default browser when clicking on items in Pocket Outlook.
Now, don't say to do a hard reset as I won't do it on principle alone, since I am sure someone knows and I am not going to reinstall everything I go just because one line in the registry!
Anyone? Or even so, anyone who had this same issue?
agovinoveritas said:
So I installed Opera.
Then when I get an email with a link on it and I click on it I get the following error:
OperaLauch.exe
The file 'OperaLaunch' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
A quick look at the Opera folder shows no file under that name. So out of curiosity I went and did a search on the web. Found only two sites talking about this but they are both in Russian. Great.
So obviously the line in the registry that points towards opening links is pointing to this program. I did a quick search and found a number of registry entries that would normally point to PIE but are not pointing to Opera.
Now I was wondering who here knows the registry entry to open items in Pocket Outlook so it uses PIE. Or even better how to make it work so it opens Opera as the default browser when clicking on items in Pocket Outlook.
Now, don't say to do a hard reset as I won't do it on principle alone, since I am sure someone knows and I am not going to reinstall everything I go just because one line in the registry!
Anyone? Or even so, anyone who had this same issue?
Click to expand...
Click to collapse
I have had this same problem and the only remedy was to uninstall, I posted this before and no one had any ideas as far as I could tell.
there is similar problem with netfront. U need to set pie as ur default browser, then link will be opened w/o probs in PIE.
btw: opera launch is or should be located in windows folder. try 2 search for file within ur pda
Thanks. But what you have told me I already posted on my original post.
I did a search already with the wildcard word "opera," and nothing called Opera Launcher came up. Then I checked the obvious Opera folder and nothing was there either. Hence why I know the issue could be fixed within the registry. That is what I was asking.
You can't set IE as your default browser because as I am sure you already know, there is no option within PIE to set it back to the default browser.
If I did a search on google I am found the registry entries to change back to PIE but there are a number of registry entries. So it could be fixed without a hard reset. But I wanted to see if anyone had figured out a way to use Opera as the Tab browsing is so much more useful and it is just better.
I have not found a fix for Opera, but as an alternative to having to do a hard-reset and reinstall everything again which is of course a hassle... I found the registry entries to switch back IE as the default.
Beats doing a hard-reset.
http://www.winmobiletech.com/sekalaiset/RevertOperaAssignments.reg
Anybody figured out the Opera problem?
Okay, after an in depth search I found the entry regarding OperaLauncher.
There is a stupid key at,
HKEY_local_Machine\Software\Microsoft\Shell\Rai\efBROWSER
Now I do not know the format to tell it to perhaps use Opera.exe.
Anyone can help?
Bump?.......
Shot, I didnt see this thread until I posted another one that is similar.
But yes, I am interested with finding this too..
Okay, I can see that NO ONE even tried to fix the issue. So I decided to do it myself. I mean, it is not the ultimate fix since I would like for Opera to open as default.
Logic dictates that Opera screwed up somewhere, so what I did was setup PIE to be the default browser by deleting and replacement two specific registry entries.
After that, PIE will still be the main browser when opening links in Outlook, and for everything else I can still use Opera. Since having to copy paste links from Outlook to IE or Opera was annoying enough to delete the browser altogether.
Cheers,
Which key is that?
Check the entry posted on my first post. Delete the Opera entries.
Take a look, type exactly as posted on value 0 and 1 an PIE will start and avoid that silly OperaLauncher problem.
Value 0
Pocket IE
Value 1
:MSPIE
Value 2
Don't change
Value 3
Don't change.
agovinoveritas said:
Check the entry posted on my first post. Delete the Opera entries.
Take a look, type exactly as posted on value 0 and 1 an PIE will start and avoid that silly OperaLauncher problem.
Value 0
Pocket IE
Value 1
:MSPIE
Value 2
Don't change
Value 3
Don't change.
Click to expand...
Click to collapse
Thanks, I was able to this no problems at all and it fixed the issue - at least by defaulting back to PIE without the error.
Hope I read this correctly and following is useful.....
To enable Opera to open links from emails in Pocket Outlook I did the following:
1. Copied 'opera.exe' (not the large dll) from \storage card\progam files\opera to \windows.
2. Found the entry 'operalaunch.exe' in the registry and changed it to 'opera.exe'.
Thats it - Opera launches when clicking hyperlinks in Pocket Outlook.
You only need to make one change:
In HKLM\SOFTWARE\Microsoft\Shell\Rai\: DEFBROWSER is a key called "1". Change the string value from "OperaLaunch.exe" to "\Program Files\Opera\OperaLaunch.exe" (or whereever Opera is actually installed). You need to include the quotes around the string. Save and restart your device. Should work (did for me).
John
Registry Keys
I had the same problems after uninstalling Opera.
Error message: OperaLaunch cannot open , blabla
I had to change the following registrykeys:
HKEY_CLASSES_ROOT\wsp\Shell\Open\Command
String Value (Default) = iexplorer.exe %1
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\ EFBROWSER
String Value 0 = Pocket IE
String Value 1 = :MSPIE
Good Luck
I managed it just.
I copied all the files from the Opera folder to the windows filder, then changed this,
In HKLM\SOFTWARE\Microsoft\Shell\Rai\: DEFBROWSER is a key called "1". Change the string value from "OperaLaunch.exe" to "\Program Files\Opera\OperaLaunch.exe" (or whereever Opera is actually installed). You need to include the quotes around the string. Save and restart your device. Should work (did for me).
Click to expand...
Click to collapse
To just opera.exe
And it worked ... It wouldnt work before, when trying to point it to the storage card, it kept saying "Storage cannot be loaded" or something ... I just realised i had forgot the " from the beginning and end of the string
Operalaunch .exe
hi my friend ,I am having the exact same problem you've had.The only problem being is that I am a novice and know nothing about computers,in other words I am not computer literate so am finding it difficult to understand.Is it possible to help me through it in easy steps if you have the time.Regards Anthony
Related
Hi,
I'm sure there is somebody here that can help me. I've set up my SPV M5000 with some old programs, and they certainly messed up with the registry about file associations.
I can display jpg normaly, but if I try to see a jpg file (ie not embeded into a web page), I get the file save dialog. At first, it was registered to pimg.exe, and I tryed associating to to pocket painter for example, with no luck.
Anybody know the key to place to go back to a normal jpg displaying state for pocket ie?
TIA
I've the same problem.
Mine is the same but I've installed nothing that would affect the file associations...
I think perhaps it's just another of the joyful 'features' of Microsoft's wonderful Pocket Internet Explorer
Does it do the same with a gif or bmp?
V
That's exactly what I had on mine. I didn't get to the bottom of it, but instead did what vijay suggested and created a local html file with the jpg embedded. All I needed was to view a single jpg within PIE (from my webcam). This works fine, but is a workaround only for 1 jpg. I wouldn't want to do this for everything!
Surely one of the File Explorer tools can change the file associations?
I think the problem lies within PIE, when you click a pic it assumes its an attachment and so will save it,
I cant try atm but its worth trying to goto a pic directly ie,
http://www.website.com/picture.jpg
it may well display the image then, not sure, cant test atm. and its not going to be very useful when doing some normal browsing.
Same with Gif. I've teste on a K-Jam, and it display the picture properly in ie. I'm sure there is something messed up in registry
Found the solution
There is a CLSID value missing in HKCR/MIME/Database/Content Type/image/jpg and other gif and jpeg
Add a string value CLSID
{698E3FCA-70C3-11D0-81E8-00A0C90AD21A} and you are set.
@thaihugo
Won't work for me.
I've tried with PHM RegEdit but same behaviour as before.
Can you give us a screen shot of the correct registry key, please?
BTW:
There is another string "Image Filter CLSID" and
there is a "Bits"-key in /gif and /bmp and /jpeg but not in /jpg.
Are these needed too?
OK now it works.
What i've done is:
Created and copied the CLSID mentioned above into
image/bmp
image/gif
image/jpeg
image/jpg
image/pjeg
Copy the "Bits" from /jpeg to /jpg
Created a "Image Filter CLSID" in /jpg with the same content as found in /jpeg
Save, wait and Softreset. -> Works as intended!
I don´t know if i've done to much, but everything works now.
I'm happy. Thank you!
I though it was my programs that would delete this keys, but it seems you need to insert them also. Maybe it is a full system bug? A registry export might be of some help if some other report the same problem.
This still isn't quite working for me...
Can someone explain again EXACTLY what I have to do?
Hmm - interesting stuff - will have to try this.
I assume this isn't going to affect other JPG viewers, eg Opera???
I have the same problem on both Hima and Universal WM2006
Himalaya > TOFCLOCK HIMA WM6 AKU.0.7.0
Universal > Jwrightmcps 9000_WWE_21200_21207_11500
The registry solution proposed doesn't work for me, probably due a different CSLID. Any suggestion?
THX
Many thanks to CouchPotato
@CouchPotato
Thank youuuu, your step by step solution worked fine for me on BA (WM6)
bye,
Ruben
Hi Folks
I've broken something. I know, it had to happen. All this "playing around" with my new toy (No, not like that! )
Going to PocketWord and it'll open something that I don't recall putting in there. This turns out to be a file in the "My Documents" called "CONFIG" that had loads of characters that are not letters, you know, like symbols and the like?
If I goto Menu / File / New it gives the message
"A problem with the document was encountered and it cannot be opened".
I suspect I've deleted something I shouldn't have Help?!
Elwyn M3100 said:
Hi Folks
I've broken something. I know, it had to happen. All this "playing around" with my new toy (No, not like that! )
Going to PocketWord and it'll open something that I don't recall putting in there. This turns out to be a file in the "My Documents" called "CONFIG" that had loads of characters that are not letters, you know, like symbols and the like?
If I goto Menu / File / New it gives the message
"A problem with the document was encountered and it cannot be opened".
I suspect I've deleted something I shouldn't have Help?!
Click to expand...
Click to collapse
Ok... First I don't think the config file in my documents is vital and I would delete it. (if your concerned about it then copy it somewhere-else and then delete.
On a PC Word uses a template for blank documents called normal.dot but on Pocket Word it uses blank.dot This file should be present in the windows folder in main memory.
After deleting the config file, I would try word again.
If it still fails to open a new wod doc, then look to make sure the template file blank.dot is present.
Mike
Hi Mike
I checked and there wasn't a blank.dot file in the windows folder, so I managed to open an word doc I already had, blanked it and saved it as blank.dot where you suggested. I closed word and tried again only to find the same error message.
So does this rule out an error with that side of word, and otherwise what would you suggest?
TIA
Elwyn M3100 said:
Hi Mike
I checked and there wasn't a blank.dot file in the windows folder, so I managed to open an word doc I already had, blanked it and saved it as blank.dot where you suggested. I closed word and tried again only to find the same error message.
So does this rule out an error with that side of word, and otherwise what would you suggest?
TIA
Click to expand...
Click to collapse
This is a little mysterious! Firstly because the original blank .dot is protected and should not be able to be removed normally. I suspect it's become corrupted. Still the replacement should have been ok. However, lets hope all your templates are not corrupted. Open a doc in word and go to menu>tools>options>default template and choose another, say memo. Close out of word and reenter. It should open and when you press new a memo should appear. A bit of a pain but until a better solution comes along you can always delete the memo lines and treat as a blank doc.
Will check around to see if there is another way to replace blank.dot
Mike
Thanks, I've had a look in the options and for "Templates" it is blank. There are NO templates at all on the machine
Elwyn M3100 said:
Thanks, I've had a look in the options and for "Templates" it is blank. There are NO templates at all on the machine
Click to expand...
Click to collapse
Good grief what have you been upto - thought I was the only one who manged that sort of thing!!.
Perhaps you could PM POF and see if he knows a way of reinstalling Word or using the ROM cab files to re-install without having to do a full hard reset. Failing this all you could do would be to create your own blank template but it would not automatically open when you tap new because I think New can only be set to one of the four standard templates - Blank, Memo, Metting Notes and one other I forget. Certainly when I created a template and put it in the templates folder it listed the official four but not mine in the drop down list for the new document default template. (i.e the list that's now empty for you)
Mike
mikechannon said:
Good grief what have you been upto - thought I was the only one who manged that sort of thing!!.
Click to expand...
Click to collapse
Nope, no chance of that....
There are plenty of "us" around
One shall, er, carefully dig
Ah ha!
I have found that I do actually have some files in the windows directory that are templates.
blank meeting memo phone todo
These did momentarily have Word Template icons moments ago, and tried to go in via Word again but now the icons match up with notes.
blank 0b
meeting 1.55k
memo 2.06k
phone 1.96k
todo 3.02k
Right clicking over "blank" reveals that it is read only. I have tried but I cannot remove the RO flag. I am hoping that because the file is zero bytes then this is causing the problems, which are still there
Onwards eh!
Edit: The 0 byte file is actually a memo file. The Word templates are 7kb apart from Todo which is 14k...
Elwyn M3100 said:
Ah ha!
I have found that I do actually have some files in the windows directory that are templates.
blank meeting memo phone todo
These did momentarily have Word Template icons moments ago, and tried to go in via Word again but now the icons match up with notes.
blank 0b
meeting 1.55k
memo 2.06k
phone 1.96k
todo 3.02k
Right clicking over "blank" reveals that it is read only. I have tried but I cannot remove the RO flag. I am hoping that because the file is zero bytes then this is causing the problems, which are still there
Onwards eh!
Edit: The 0 byte file is actually a memo file. The Word templates are 7kb apart from Todo which is 14k...
Click to expand...
Click to collapse
Those file sizes look fine apart from blank.dot which should also be 7kb.
On mine I just checked the templates and they should open directly from the windows directly. They all have word icons.
Mike
I have the notes templates and the word templates. Alas late night scrolling across the PDA got me confused.
Do you know of a way to make the files non read only? I don't seem to be able to change that at all? I've tried in Windows and on the PDA.
Although, I have now fixed the ActivSync issue so it doesn't keep disconnecting Grr Hubs Grr.
Elwyn M3100 said:
I have the notes templates and the word templates. Alas late night scrolling across the PDA got me confused.
Do you know of a way to make the files non read only? I don't seem to be able to change that at all? I've tried in Windows and on the PDA.
Although, I have now fixed the ActivSync issue so it doesn't keep disconnecting Grr Hubs Grr.
Click to expand...
Click to collapse
Nope, I tried reseting read only tag on both PDA and PC as well, no joy. I have posted a thread asking if anyone knows how to re-install an application without hard re-set. I believe it is possible if you have extended rom cabs showing but which cabs as I do not see one clearly marked Word.cab or something similar. The joys!!!
Mike
Thank you Mike for all your help.
I've not even breached the option of ROMs yet or even dabbled in it, and I don't think I've got the guts to juuuuuust yet
If all else then I shall do a reset, a hard reset.
I seem to have this problem also, interestingly. Today when I tried to open the word mobile program, I got this prompt saying that I can't open a new word document due to some error and brings me to my storage card wif all the word documents which I can open wif ease. What seems to be the problem? Any way I can reinstall this program again without hard resetting? I am pretty sure it's not some software conflicts, maybe I accidentally removed some shared files with memmaid.
YES!! Finally I got it. I shifted my documents folder with the sub folder 'templates' to the storage card before so now I just placed back the templates subfolder to the device's My Documents folder and that basically solved my problem!
I found that many of the latest ROM cooks of WM6.1 have the annoying issue of Activesync always starting itself every minute... i searched a lot and found the best common solution is the fake account with manual settings...
After playing around with the registry i managed to find a better way.
Just open your favourite registry editor and set the value:
HKCU\Software\Microsoft\ActiveSync\KeepAlive
to 0
and enjoy.
Hope this will help future cooks to use this feature in their ROMs.
Cheers
Personally, I've been trying to read up on editing embedded database files (and CEDB files) to fix this situation once and for all. I've hex edited mxip_notify.vol and removed the repllog.exe call for AS after a time sync (which is the main reason AS starts up roughly every minute). It works, though when checking the notification queue there are three empty notifications that I'm not sure whether they hurt performance or not. Ultimately, if someone is able to get the WM5 or WM6 (6.1) SDK and knows how to edit EDB's or CEDB's (in a volume, of course. ), I'm sure the community as a whole would greatly appreciate it. I'll keep working at it; however, I've never used VS 2005 so I have a nice learning curve to navigate.
i already try the reg edit method,but it still come back when i softreset my phone.
the best method is the fake server. =)
Keep in mind also that on the 6.1 ROMS, if the Automatic Time Zone setting is enabled in the clock settings menu, it will continue to load up activesync periodically. Disabling it, at least for me, keeps activesync at bay...............
The hex edited mxip_notify.vol works great for me, I can still leave the Automatic Time Zone setting enabled without any AS problems. Just would like to eliminate the blank notifications in the queue.
I can post my edited mxip_notify.vol for anyone that wants it. The only thing is that it needs to be cooked in. So chefs would have the most benefit of this.
EDIT : By request, here is my modified mxip_notify.vol. When cooking simply replace the mxip_notify.vol in the SYS\Shell folder. Enjoy.
KMFM$ said:
The hex edited mxip_notify.vol works great for me, I can still leave the Automatic Time Zone setting enabled without any AS problems. Just would like to eliminate the blank notifications in the queue.
Click to expand...
Click to collapse
Yes please. Unfortunately, this might introduce one of my pet hates about WM6.0 - the blank notifications...
rling said:
Yes please. Unfortunately, this might introduce one of my pet hates about WM6.0 - the blank notifications...
Click to expand...
Click to collapse
No problem. Check my post above I've added the file there. I simply wish that I had the skill (and time to learn) to edit the volume properly to eliminate the notifications. Oh well.
bradipo.xda said:
Just open your favourite registry editor and set the value:
HKCU\Software\Microsoft\ActiveSync\KeepAlive
to 0
Click to expand...
Click to collapse
for me on polaris with syrius r4 the regkey seems to work... changed it yesterday and no active sync since then! so many thx!
oh, well... looks like the "keepalive" edit is only a partial solution. It works only until AS is started again (USB connection, launching it manually, or timechange if not disabled in the notify queue).
I played a bit with AS and here's what I found 'til now.
Everytime it starts it checks if a partnership with an exchange server is set, if not the "keepalive" value is set to 1.
If there's a partnership and the schedules are different from both "manual" it sets the keepalive again to 1.
That's why reg_editing the value lasts only temporarly.
So, the only way for not having A.S. "alive" is having a partnership with something and the sync schedules both set on manual...that's why the fake server is the best method, but I was searching for a way to "cook it in".
For the partnership issue i found this workaround.
Add the key {00000000-0000-0000-0000-000000000001} under [HKCU\Software\Microsoft\ActiveSync\Partners\]
and the string Engine="{22C7DA12-F3FD-4875-8344-7786454F6534}" in that new key.
This will create a fake partnership with a dummy exchange server without having to go through the configuration menu, so this tweak can be used for cooking.
The second part require a bit of databases manipulation. Actually i know what to change and where but i'm not able to figure out how to cook this (in particular i need to know how the pim.vol database is created in the first boot).
I'll play some more tomorrow and will post what found... and eventually i'll try to solve the empty entries problem...now is time to have some sleep
attached there's a .reg with the tweak mentioned... cheers
Alternative method
Hi,
I've used the fake exchange server method before, but I prefer to use SKTools to do the job. Been using SKTools for over two years and this feature has been available since then.
Download SKTools from http://s-k-tools.com/
Install SKTools and disconnect your PDA.
Make sure activesync on the PDA is closed (not minimized).
Go to the Tune-up section, and enter the activesync tab.
Change "AS auto connect" from yes to no.
No need to soft-reset.
Done!
Note that the PC will still detect the PDA, and this is reflected in Device Manager, but Activesync (WinXP) and Windows Media Device Center (WinVista) do not start. There is no syncing.
The PDA will also detect the connection, and activesync will start in the background, but it will not sync anything.
I use this method to charge my PDA without activesync starting when I don't need it. Hope this works for you too.
Hi,
Thanks a lot mi friend !!!!
mosestan said:
Alternative method [...]
Click to expand...
Click to collapse
thx for the directions, but... looks like the tweak you posted is intendend for keeping AS from starting on the desktop, while were trying to do the opposite, stopping AS from starting itself every minute, and makin' it a permanent cooked tweak ready for ROM flashing...
anyway, there's no real need of sktools to do that, is the same option in actyvesync-connections
or through registry key
HKCU\ControlPanel\Comm\AutoCnct
there's still some work to do
bradipo.xda said:
oh, well... looks like the "keepalive" edit is only a partial solution. It works only until AS is started again (USB connection, launching it manually, or timechange if not disabled in the notify queue).
I played a bit with AS and here's what I found 'til now.
Everytime it starts it checks if a partnership with an exchange server is set, if not the "keepalive" value is set to 1.
If there's a partnership and the schedules are different from both "manual" it sets the keepalive again to 1.
That's why reg_editing the value lasts only temporarly.
So, the only way for not having A.S. "alive" is having a partnership with something and the sync schedules both set on manual...that's why the fake server is the best method, but I was searching for a way to "cook it in".
For the partnership issue i found this workaround.
Add the key {00000000-0000-0000-0000-000000000001} under [HKCU\Software\Microsoft\ActiveSync\Partners\]
and the string Engine="{22C7DA12-F3FD-4875-8344-7786454F6534}" in that new key.
This will create a fake partnership with a dummy exchange server without having to go through the configuration menu, so this tweak can be used for cooking.
The second part require a bit of databases manipulation. Actually i know what to change and where but i'm not able to figure out how to cook this (in particular i need to know how the pim.vol database is created in the first boot).
I'll play some more tomorrow and will post what found... and eventually i'll try to solve the empty entries problem...now is time to have some sleep
attached there's a .reg with the tweak mentioned... cheers
Click to expand...
Click to collapse
That's good info, bradipo.xda. Have you looked at using CeRegEditor to help with finding the other necessary entries? You can perform a "before and after" comparison of the registry for detecting registry changes. I would look into it personally, however, I'm a little to busy to do so right now.
SOLVED
Here I have attached an mxip_notify.vol with ceipui and the timed repllog entries removed AND I have attached a provxml that will set sync times to manual without creating the fake server. This combination effectively prevents ActiveSync from restarting itself every few minutes.
I use this reg key, didn't see it mentioned here.
Code:
[HKEY_LOCAL_MACHINE \ System \ ActiveSync \ Engines \ {176F4FFD-F20C-4bd4-BDD7-01D0726C567B} \ Settings]
"SyncAfterTimeWhenCradled"=dword:00000000
Change the dword value to 0 as shown above, which means manual sync. The default value is 5, 5= 5mins, 15= 15mins, etc
firefly123 said:
I use this reg key, didn't see it mentioned here.
Code:
[HKEY_LOCAL_MACHINE \ System \ ActiveSync \ Engines \ {176F4FFD-F20C-4bd4-BDD7-01D0726C567B} \ Settings]
"SyncAfterTimeWhenCradled"=dword:00000000
Change the dword value to 0 as shown above, which means manual sync. The default value is 5, 5= 5mins, 15= 15mins, etc
Click to expand...
Click to collapse
that keeps repllog.exe from running in the background?
selyb said:
that keeps repllog.exe from running in the background?
Click to expand...
Click to collapse
Only one way to find out lol, seems to but will need more time to see if suddenly launches again?
Something to do with TouchFlo3D
Hi All,
I don't have the time to look into this myself, but I found that when I disabled touchFlo 3d to try out Mobile Shell, active sync never started up randomly. As soon as I turned TF3D back on... active sync kept coming back.
Just putting this out there, see if it helps anyone find a fix for that damn activesync.
The best and easiest solution
Holy cow people!, that's some crazy junk you're trying out there. I applaud your efforts but there is a much easier way.
As you know...
1. Disable the Repllog Notification (Apprunaftertimechange) in the Notification Window.(recommmend fdc taskmanager for this)
2. Registry hack [HKEY_CURRENT_USER\Software\Microsoft\ActiveSync] locate value "Keep Alive" change this to "0" for disabled.
But now the enlightenment...
3. Use fdcsoft's registry editor to tap and hold "KeepAlive" and select "Export..." (or chose from file menu) This will export this one value to a .reg file. Put this file in your \\Windows\StartUp folder. Now if you don't already have a program to "run" .reg files, you need to associate them with TaskMgr.
4. Using Total Commander, tap and hold your .reg file and select "Properties". Select "Associate" tab. Tap the gray box that says "Associate..." In the "Command:" box, reference the location of TaskMgr.exe (ex. \Program Files\FdcSoft\TaskMgr\TaskMgr.exe) In "Parameter:" box, leave the "%1" and add "/silent" (%1/silent) This keeps a dialoge box from popping up.
6. "OK" the changes and enjoy!
Now when windows starts it will "run" the .reg file and change the 1 back to 0. Problem solved.
bye bye Activesync!
fsb2cool2care said:
Holy cow people!, that's some crazy junk you're trying out there. I applaud your efforts but there is a much easier way.
As you know...
1. Disable the Repllog Notification (Apprunaftertimechange) in the Notification Window.(recommmend fdc taskmanager for this)
2. Registry hack [HKEY_CURRENT_USER\Software\Microsoft\ActiveSync] locate value "Keep Alive" change this to "0" for disabled.
But now the enlightenment...
Click to expand...
Click to collapse
Ok, best and easiest are matters of opinion. IMO, installing the cab I provided here is easier than the 6 steps you provided and doesn't require anything to be run at startup since Activesync will not try to run on its own anymore. But, that's only my opinion and it goes without saying that each person should do whatever works best for him or her.
I had to do a hard reset recently and intrying to restore it back to how I had it, I changed the Opera widjit so it opens a different home page. It now won't open anything, including the pre-installed favorites except for Youtube, which works fine. The GPRS conection works as I can use the Map Search tab to Google maps, which operates fine. Internet Explorer also works. I think its an Opera issue but that's about my limit!
Also, since I now have a nice clean contact list, was there ever a final resalt in getting Windows Live working without duplicating most of my contacts. I only want to be able to get Hotmail pushed through occasionally but without messing up my Contact list.
Any help much appriciated,
Woolly.
Check your registy.
HKLM\Software\HTC\Manila2D\InternetWidget
or
HKLM\Software\HTC\Manila2D\InternetWidget\Customized
.
There is probably a a string value with a wrong "opera.exe" or empty string.
Remove that one (or rename it to be safe).
Thanks for the quick reply. I checked in the registry and in InternetWidget there's another Folder called Customized as well as two ab strings. One is (Default) (value not set) and the other is OperaEXEFile which had nothing in the string line. Is this where I should put opera.exe ?
Thanks again,
Woolly.
Try renaming "OperaEXEFile" to "BLABLAOperaEXEFile".
Maybe you need a soft reset afterwards.
It won't let me add BLABLA to the existing ab OperaEXEFile string. Should I deleat it and create a new one?
Thanks for your patience, Woolly.
Then delete the complete OperaEXEFile key.
Thanks! Deleting that file got it working properly. Won't begin to guess what caused it but glad its all ok.
Regards, Woolly.
I think it is caused by the Manilla 2D Customizer.
Dear,
Can you send the print screen of the registry of the Manilla 2D, customized folder and 0 folder inside it.........
I want to correct my opera as well but I fear I am short of some values........
Same prb with me..............
Internet Explorer is working fine but opera doesn't even tries to connect the GPRS.............
[email protected]
im using chiese tp2 with tf3d, over here we have opera originaly come with my tp2 however, i can only open 2 tabs, one is first page and one more after that. my job needs to be using more tabs that HTC gave to us (2 tabs only) i normally needed 4~ 6 different tabs, therefore, im wondering that if there is anyone know how to unlock this "tab problem"
i have already tried to adjest the "max allowable" in opera:config, but wnehever i tried that still i can only open 2 tabs.
i really need to have this function to be unlocked, and please help me
There was a thread around here that contains the exact solution to your problem.
Solution
type in the browser "opera:config" without the quotes, scroll down to "User Prefs" and click on it. scroll though that list till you get to "Max Allowed tabs". i changed mine to 15, I dont recommend changing it to 100 and then trying to open 100 pages. My pc has firefox and ive only had to use a max of 25 tabs
Sprint TP2
I have tried this time & again to no avail. Am i doing something wrong?
you may already know this but you have to scroll down to the end of the user pref. section and click the save button after you change the setting.
mylok, yeah had done that already. no such luck.
The reason it won't work for you is because of push internet. Opera is always running in the background. That's why the changes you make in opera:config won't stick.
2 ways to go about it:
-disable push internet and stop Opera from running. You can't do this from the GUI. See here for details.
-or you can edit the opera.ini file directly with a text editor. This is actually quite easy. Save the file to your desktop and open it with notepad. It's very easy to figure out what you need to edit. Open it and try. Then overwrite the original file. (it's found under "\windows\opera9\")