I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]
Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676
still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead
fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko
It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz
Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone
same problem here,
help needed in advance
Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.
hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.
how do you get the phone into the bootloader?
Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.
no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?
The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)
im having the same problem on the o2 orbit ( need a orignal rom
upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent
i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.
cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!
send me a pm with your email, i'll send it to you
got mine back from the repair center friday.
no cost at all, fixed
route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one
after upgrading my JAM i got this problem " No GSM" and when the device start on windows ,, i got no phone function at all , like no radio rom inside , i tried to insall a new Radio rom , but i got upgrade error 114
Any one can help ? PLZ
Hi if i were you i'd download the official JAM Rom from Club IMate. go into bootloader mode (by pressing camera + Power + reset) and load the original Jam Rom the latest WWE Rom from club I-Mate is 1.12.
Hope this helps.
Thanks for ur fast reply .. but i already download it and try to update the official rom to my Jam but it stop and give me Error 114 and some time Error 150 and nothing go on
if i delete the radio file from the rom , it works fine and go on
Thanks
U need to go to service center , because i have the same problem and they told me i need to change the whole mother board for fixing this problem
Hello, i tried to install wm6 on my qtek 9100, first i have followed this guide: http://forum.xda-developers.com/showthread.php?t=298613 , but the wizard_love rom failed, and then i CID unlocked my phone and that worked fine but then when i tried to install T-Mobile 2.26 rom" from the link: http://rapidshare.com/files/38880130..._ship.exe.html an error message comes up after the instal has
reached 1% i think its "error 326: this NBF file can not be used for your PDA phone, please check your PDA file" and then the instal does not continiues. So i installed button_rom again from the gudie and the install worked fine, but when i restarted my phone i gets stuck in bootladder screen (not the 3 colored screen) and there are IPL/SPL 1.01 but i dont came any longer, i tried to reinstall button rom but it´s the same thing, i get stuck and my phone wont go in to windows...
What shall i do??? pleease help me i have just buy this phone for 400 dollars, so i must make it work again, the best is if i get the orginal swedish rom for my qtek 9100 pleeeease help me please
Sincerly yours// Johan
Edit: almost every rom i try to install, it gets stuck and a error message comes upp: Error 326 ( i think) please check your NBF file or something like that, what is the NBF file? and how do i fix it?
AFTER UPGRADING IT ,ITS NO MORE WORKING
GIVING SOUNDS MUTING!!!
CANT BE CONNECTED TO THE PC!!!
IF SO THEN ITS ONLY FOR ASHORT TIME!!!
TRIED TO INSTALL THE ORIGINAL IMATE ROM BUT IT GOES FOR 38% AT MOST THEN DOESNT PROCEED!!!
EVEN MOST OF THE TIME IT GIVES ACONNECTION ERROR OR COUNTRY CODE ERROR
WHAT TO DO GUYS
PLEASE HELP
EMAIL ME:
[email protected]
THANX