I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]
Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676
still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead
fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko
It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz
Related
Dear all,
My O2 Mini is dead after the power when off during the course of recovering the data.
The screen is not lighted up although the phone is on. The only thing that is visible is "Serial" on the top and "Ver 1.0" at below of the screen. Tried everything but was not able to reflash my ROM and bring my phone back to life again.
Can any expert help me with this?
Please advise.
Waiting urgently.
Regards,
Ken
Did you try taking the battery out for several seconds to get it out of that mode?
That means your bootloader works then your fone aint dead, try doing this ...
Anansky's BigStorage ROM
Hi need some help! i changed my qteck s200 to dopd rom and now i want to get back to the qtek rom but its not letting me, it keeps coming up with errors!
Any help would be great!
and does anyone know if changing the rom of your devise to one which is different, voids your warenty!
http://forum.xda-developers.com/viewtopic.php?t=52244
oh NNNNNNNNNNNOoooooooooo
I just went through that link you gave me and followed the 10 steps it completed the first step and when it said to soft re-set i done it and my phone just does not load it stops at the dopod enjoy mobility sign!!
i have tried hard reset too and nothing works
Help help help!!
what shall i do??
Help needed to get back to WM5 (cingular 8125)
Please can some one help me.
I have tried to get my cingular 8125 back to the wm5 operating system.
I used the hard reset and the soft reset but keep ending up with a multi coloured screen.
I have looked but I cant find the solution.
The website weare I fine the program is this,
http://www.imei-check.co.uk/m3000unlock.php
Please Help Help Help Help Help Help Help Help Help
Sounds like your stuck in the "bootloader" screen
This is where you would flash the ROM I believe.
Just connect it to your computer and start your ROM.
If I am not mistaken it should reboot at the end of your ROM loading.
claroscuro said:
Help needed to get back to WM5 (cingular 8125)
Please can some one help me.
I have tried to get my cingular 8125 back to the wm5 operating system.
I used the hard reset and the soft reset but keep ending up with a multi coloured screen.
I have looked but I cant find the solution.
The website weare I fine the program is this,
http://www.imei-check.co.uk/m3000unlock.php
Please Help Help Help Help Help Help Help Help Help
Click to expand...
Click to collapse
When your 8125 is at the multi-colored screen, is there also a small message in white text prompting you to send? If so, you need to push the green hardware phone key. This sends info to the mfg, to get the 8125 operating again.
8125
2.25.11.102
Same as Claroscuro. Need to get WM5 back from installing iPhone skin. Tried soft and hard resets and iPhone skin still there. Can I re-install WM5, as I would with any PC OS?
Please help.
Thanks!
rapanui
hi All,
deeply appriciate for any help cause after my BA upgrade WM6 use RU_BA_Xplode my phone did't start again. I saw 100% upgrade CE Completed but nothing happen then i plug out the battery and plug in and now my phone death. please please help
it worked, after search some thread. Thanks
hello .my SPV M700 is frozen on Orange startup..i tried to unlock the my M700 spv with HTC_Trinity_SIM_CID_Unlock_v1
but when i tried to romupgrade it went to 7%...
i tried several times but sometimes goes to 1% or 7% then the programme turns off saying you have corrupt file...but i downloaded several other files still the same thing.
my SPV M700 turns on to orange statup then it freezes there until i take the battery off.
now is there someone who can help me please ??
zakovb said:
hello .my SPV M700 is frozen on Orange startup..i tried to unlock the my M700 spv with HTC_Trinity_SIM_CID_Unlock_v1
but when i tried to romupgrade it went to 7%...
i tried several times but sometimes goes to 1% or 7% then the programme turns off saying you have corrupt file...but i downloaded several other files still the same thing.
my SPV M700 turns on to orange statup then it freezes there until i take the battery off.
now is there someone who can help me please ??
Click to expand...
Click to collapse
I have a orange spv m700 and the same thing happened to me.
I installed olipo's 1.20 hardspl and then the wm6 rom.
After a few days the phone crashed and hanged on the first splash screen(mine is htc) until I hard reset it.
This happened again after a few days so I changed back to olipro's 1.30 spl and so far so good.
Hope this helps you!
please
thank you for sharing your knowledge..i would be grateful if you could give me a link for the olips hardspl and wm6..
i wounder if you could some notepad for intructions ..i would be so grateful thanks
zakovb said:
thank you for sharing your knowledge..i would be grateful if you could give me a link for the olips hardspl and wm6..
i wounder if you could some notepad for intructions ..i would be so grateful thanks
Click to expand...
Click to collapse
quoting an answer by a fellow on the trinity upgrading forum:
Here, http://www.trinityguides.info/ and here: http://www.trinityguides.info/, and here http://forum.xda-developers.com/forumdisplay.php?f=359
many thanks
i like to say to you many thanks buddy ..i really do appreaciate it...thanks on you your a great forum member
thanks...but it did not work for me...still the same..stuck on orange start up...tired everything...did hard spl wheen i did that it took 7 seconds to flash/programme...then wm6 this went to 1% then the fone switched off and restarted and update said error 270 yes sure.
i had to manually put it tri colour mode....everytime
i repeated the process 20 times still the same result..maybe i have damaged the radio or done something wrong while flashing fone.........
the fone was working until i tried to unlock it with htc trinity unlock...thats when the problem started...
it wont update ...if i flash hardspl any version...it runs and completed in 7 seconds..i don't think that is right.
if there is anyone who can tell me where i am going wrong ...it would be appreciatative..thank you
come on guys ...is theres anyone who can help..
problem solved ...binned the spv m700 ...many thanks to all the forums members