AFTER UPGRADING IT ,ITS NO MORE WORKING
GIVING SOUNDS MUTING!!!
CANT BE CONNECTED TO THE PC!!!
IF SO THEN ITS ONLY FOR ASHORT TIME!!!
TRIED TO INSTALL THE ORIGINAL IMATE ROM BUT IT GOES FOR 38% AT MOST THEN DOESNT PROCEED!!!
EVEN MOST OF THE TIME IT GIVES ACONNECTION ERROR OR COUNTRY CODE ERROR
WHAT TO DO GUYS
PLEASE HELP
EMAIL ME:
[email protected]
THANX
Related
Can anyone help tried to upgrade my XDA II and device got disconnected from cradle, when powering up just displays (serial v1.06) and won’t continue to boot.???
Put it back in the cradle, it should display usb on the xda 2, just start the upgrade again.
Ta for your reply HOWEVER!!
The computer can not detect the XDA and is showing un known USB device?
Any more suggestions?
If the PDA screen shows "Serial 1.06", try to put in cradle. Is the screen changed to "USB 1.06"?
If so, kill ActiveSync (wcescomm.exe) and try to run update again...
Receiving Error message 100
The rom image you are trying to use is not designed to work with your pocket PC, please check the vendor web site and download the correct ROM update.
WHICH ROM UPDATE?
Please advise
Re: Receiving Error message 100
UKA said:
The rom image you are trying to use is not designed to work with your pocket PC, please check the vendor web site and download the correct ROM update.
WHICH ROM UPDATE?
Please advise
Click to expand...
Click to collapse
Message 100? And what's the name of this error message?
Xda_II Upgrade_V16050
Can you advise of any other upgrades that would work?
I think I have done it!
I have downloaded V172 and it seems to be upgrading.
I will keep you posted
It has worked
I was trying to install a previous version of softwear, I have know installed V172.
I will keep you posted
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
HELP ME!!!! black display after ROM upgrade
I've about the same problem...
I tried to upgrade my XDA II ROM... I'm a novice!!! I think...
1. I putted my XDA in the cradle, started install application
2. the same error.... and now I've a XDA II with a black screen and i can read USB at the upper and V 1.
3. I tried to re-install the ROM upgrade, but everytime it try to erase the ROM and the response is always: error 112 CE ...bla bla bla.
4. upgrade software suggest me to do a reset and to re-install... it's a loop!!! without solution!!!
Can U help me???
I've hope?
....it's only a week i bought it...................
P.S.
Sorry for my very bad english......
Guys, what the upgrade says is VERY MUCH IMPORTANT!
In other way, nobody can help you... "Bla, bla, bla" is not so much helpfull...
Model ID Error
I having the same problem, my error message is MODEL ID Error Message 100. My mobile is Qtek 2020. XDA II
I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]
Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676
still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead
fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko
It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz
Hello,
I have a big problem. I started the upgrade with a wrong file and I received a error message thet the upgrade is not for XDA2i (it was for XDA2) and I should use the correct upgrade file. Sience then the XDA 2i does only show Serial 1 and then it switches to USB message and it does not do anything. What can I do to make it power up again?
Thank you,
Tudor POP
got it
I just finished upgrading with Pugs image ... and it is up and running again. Thank you Pug for your beautifull work!
how do you fix it.. I got the same proble here..
Hi i have a Qtek 9100 and i forgot the password....
I have tried all :
Update my wizard
Hard reset --> give me an error "Fat formating Failed"
Can any one give me a help ????
flash your rom again
yo i got the same phone and i need the rom if u can pls send me the rom i will deeple be greatfull thanks bc my says data craches
after upgrading my JAM i got this problem " No GSM" and when the device start on windows ,, i got no phone function at all , like no radio rom inside , i tried to insall a new Radio rom , but i got upgrade error 114
Any one can help ? PLZ
Hi if i were you i'd download the official JAM Rom from Club IMate. go into bootloader mode (by pressing camera + Power + reset) and load the original Jam Rom the latest WWE Rom from club I-Mate is 1.12.
Hope this helps.
Thanks for ur fast reply .. but i already download it and try to update the official rom to my Jam but it stop and give me Error 114 and some time Error 150 and nothing go on
if i delete the radio file from the rom , it works fine and go on
Thanks
U need to go to service center , because i have the same problem and they told me i need to change the whole mother board for fixing this problem