Keep trying to flash cingular 8525 ... - 8525, TyTN, MDA Vario II, JasJam General

I am VERY VERY frusterated. I keep flashing it and it gives me error 262 or something. and it will not flash.
I got to the flashing once it went to 100% but I did not see a unlock button it mentioned etc etc. .
ANY help would be appreciated ! Cant use my precious phone

Related

Atom Pure GSM Signal Problem ! Help !

I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.

how to downgrade athena100 spl-v1.20oilpro to factory defalt plz help me????

i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.

Help please!

I was trying to update my Athena to wm6. I got errors 270 so i tried to update the spl as i read on the forum. I stupiditly updated the x7510 spl so i think i really screw it up.
Results:
When I try to open it it shows nothing. The joysticks light is just on.
I can enter bootloader. It says:
ATHE400
IPL-v1.00
ATHE400
SPL-3.65.0 Ol iNex
I cant do anythink at this point. Any flash i use it gives me an invalid device id. I also tried the Athena Unlocker but it gives me the same error.
Is there any way to make it live again? Please help me I am desperate.
I did the same thing. And I am also desperate Happy not to feel alone :O But i think no reply for this one... Olinexx help us please...
to: palamosteliaro
this thread started by ggursel seems to have solved that problem. hope that helps
http://forum.xda-developers.com/showthread.php?t=502682

Help guys! anyone....

This is the story:
I bricked my phone (Elf) because I didn't CID unlock it after installing the Opal 6.1 rom. So when I tried to install the backup ROM I made it got bricked. I read all the threads about how to revive the phone and I can't get any to work.
I can't do the GoldCard since I don't have a working WM phone. So I tried the Wild card unbricker ROM and the phone got worse. Now I only get to the tri color screen without any "RUU" at the top and every time I try to flash another ROM on it it shuts and I get an error message saying something like "Invalind vendor or error in image" etc... Please help me, what happend??? I cant flash any ROM. I cant do hardspl. I can't do anything.
PLEASE HELP ME! Anyone who's familiar to this problem?
Thx in advance!

Rom Flash problem

have tried to flash my phone today , with no success
everytime i try either using hard SPL v1 or Touch IT , i get the same error
get the tricolour screen then says no image , i then try and flash and get connection 262 error
anyone any ideas what i am doing wrong ?
thanks in advance
R
Hey, well you're not the only one with this problem... I have it as well and I've spent a few evenings to find a solution, but nothing worked :S I hope someone can help us out...
heres hoping as i really want the Touch IT rom ...
R
Remove the SD card when flashing this way - that will fix the 262 problem.

Categories

Resources