Hi all....
I have had the above stereo BT headphones for about 1 month which I use with my Vario 2 and I have to say the sound quality is awesome.
My questions are (to anybody who has this combination or similar):-
- Why when you answer a call and then finish the call (through the headphones) does it sometimes resume the music through the loudspeaker on the phone rather than the headphones ? I find its really inconsistent...sometimes back through the headphones and other times through the Vario's loudspeaker ????
- Also when I go to answer a call (that is ringing through my headphones) the voice comes through on the Vario rather than my headphones ??? Again...seems to be inconsistent and I'm sure I'm not doing anything differently??
- Is anybody else experiencing similar problems with this combination
It seems that the above problems I'm experiencing might have the same root cause and I need to know if I'm doing something wrong or whether its a 'compatibility' issue between the two. I don't have this problem with the Samsung X830 I use with the DS-970's .
I'd be so grateful for any clarification on these issues....
Thanks all
CCN0301
Strange behavior indeed...try a hardreset and/or rom upgrade...and please look in the forums for the usual a2dp and bluetooth fixes/hacks for your hermes.
BTW in Hermes->Hermes accessories already is a thread about this device/accessory combination.
Related
Whenever I use my bluetooth headset (Motorola HS850) I can hear the person on the other end just fine but they cannot hear me unless I literally SCREAM. Since that's obviously not a decent workaround I've taken to not using my headset. I miss it and want to use it again.
I've searched the forums and read through this thread completely. I cannot find a single answer that everyone agrees upon.
Can someone please tell me how to increase the volume of the mic of my headset?
I'm runnning Mr Clean's 2.3 ROM (non-UK version).
I have the same problem with all 3 my BT headsets, my bluetrek G2, my i-tech stereo headset and my Sony Ericson BT Car Kit.
What is worse: even when using the the wizard as a normal phone people complain they can't hear me and I also have difficulty in hearing them. I am on the same rom as you.
Without the headset everthing's fine. I hear them, they hear me, no problems at all. Add the headset and the problems begin.
melvynadam said:
I've searched the forums and read through this thread completely. I cannot find a single answer that everyone agrees upon.
Can someone please tell me how to increase the volume of the mic of my headset?
Click to expand...
Click to collapse
try to increase value of HEADSET_UPLINK_VOLUME registry key. it worked for me.
Thanks, that was the key that looked most promising in the thread I refered to in the OP.
I have in fact already tried changing that from 13 to DD but to no avail. What did you change it to?
melvynadam said:
Thanks, that was the key that looked most promising in the thread I refered to in the OP.
I have in fact already tried changing that from 13 to DD but to no avail. What did you change it to?
Click to expand...
Click to collapse
i've changed it to DD. works with me..
Anyone else?
Hard to believe I'm the only one with this issue. Anyone else got a solution I can try?
(in other words: BUMP)
i have the same problem.. i jsut bought a Jabra JX10 after having a Moto BT850 and there's no volume for the BT headset.. highly annoying becuase noone can hear me.. i'm going to try the registry setting for the headset, but instead of DD i'm trying CC which worked wonders for using the regular mic.. we'll see
Hi guys
Did either of you get anywhere with this? My O2 Xda Mini S also has this issue. Geesh you'd think they'd test these things before releasing products!
I've tried setting the following to FF & CC under *all* 4 of the AUDIOGAIN folders:
EARPHONE_UPLINK_VOLUME
HEADSET_UPLINK_VOLUME
RECEIVE_UPLINK_VOLUME
I then rebooted, and things are no different. It's weird though because if you take off the Bluetooth (I use the Jabra BT500) and talk directly into the Mic, it sounds perfect - just not when worn on the ear! I thought my old BT200 was faulty due to this, which is why I wrongly bought a new one :roll: Thanks O2/HTC!
Come on guys, let's get this sorted for everyone. Who knows something and isn't telling?
Who knows something and isn't telling?
Click to expand...
Click to collapse
I wish I did. Sadly I've given up and no longer use my BT headset. I miss it like crazy but like you, reached a dead end. If someone has a solution please, please share.
Looks like nobody is able to help us with this.
Is yours an O2 Xda Mini S?
If so have you reported it to O2 technical as I have?
What Bluetooth(s) have you tried?
I started this thread to identify working Bluetooth headsets, but so far only one reply. Maybe it's a brand-by-brand issue:
http://forum.xda-developers.com/viewtopic.php?p=330649#330649
O2 suggested replacing the phone against my wishes (as others have reported the volume issues and reg hacks). I will report back if I still have the problem with the replacement.
have you guys compared roms? I noticed two people were using the same rom? If everyone with this issue is using the same rom, then maybe that could be the underlying issue...? I'm using the Cingular 2.25 rom and never had this problem.
I was using O2 v2.21.4.101
ROM
I'm using Mr. Clean's 2.24a ROM and love it. I downloaded the ROM on the advice of a friend who uses the same ROM and successfully uses a BlueTooth headset so I'm reasonably confident that it's not the ROM.
re help
well I'm using a wizard with the cingular cf2 multi installer. the wizard is an imate kjam and hs850. after reading this thread u might want to try the settings for the mic agc. enable it and see. my problem is when ppl talk its low. I have to press the headset against my ear so I can hear them. as well as them hearing me. so we all in the boat. I will try the enable mic agc and report back.
cheerz
agc?
again
AGC? Anyone? Bueller?
AGC = Microphone Auto Gain Control.
It should be in the Settings under the System tab if your rom has it. Basically this only works with the built-in mic though and not wireless headsets.
No AGC doesn't help, but I suspect this is some issue to do with the level at which the Wizard uses echo cancellation. I think it is expecting a louder voice through the Bluetooth and as it doesn't hear a voice above the correct level, it barely transmits the audio.
I use the Jabra BT500 and if I take it off my ear and talk normally into the mic hole, callers can hear me really really well. It's just in the 'on-ear' position that it doesn't work.
*Update* I have received a replaced Xda Mini S, and tried it with its original v1.x ROM and the new v2.x ROM. Both have the same problem. So, I have tried:
Different Jabra headset
Different Xda Mini S
Different ROM
Changing all the registry settings as per the other thread
...all in different combinations
I therefore suspect it may simply be that the Wizard is incompatible with Jabra bluetooth headsets.
melvynadam, what headset are you using?
CJSnet said:
melvynadam, what headset are you using?
Click to expand...
Click to collapse
Motorola HS850. I used to have a Motorola phone and a Pa1m0ne Tungsten T3 but decided that I'd rather carry a single device. The HS850 worked wonderfully with the Motorola phone and I really miss having a BT headset.
Hi All,
Finally recieved my ATOM EXEC and must say I am impressed with this product, however I am wanting to know if anyone has tried to make or recieve any calls without using the Bluetooth Headset, or the wired headset. My problem is, that People can hear me but I cannot hear anyone through the phones internal speaker. However it will work on all forms of hands free. Can someone with an Atom exec, please confirm if they have this problem or not.
yes, the speakerphone on the Atom needs to be louder. At max volume, it's still relatively soft. Hopefully, there's some kind of fix
Not the hands free speaker
Hi thanks for your reply, I actually mean the speaker inside the earpiece when you hold your pda upto your ear, there is no sound whatso ever, and when I do an audio loop back test it does not work at all. How about yours?
yes, i was talking about the earpiece and it's really soft. Although my is working fine though....
for my atom exec, it works fine for phone call. No problem in any call(all in speaker phone and in bluetooth headset). I can hear sound of caller and caller can hear my sound. However, i've found problems when i use bluetooth headset to catch phone. It sounds hissing after i press accept call from bluetooth headset for a second then phone is normally.
My CHT version works fine, no such problem.
sidneysum said:
My CHT version works fine, no such problem.
Click to expand...
Click to collapse
same as me work fine, only hissing sound when i catch phone..... (a little bit problem for me)
Atom Exec LCD still squeals like crazy same as standard Atom anyone else have same problem?
Hi guys,
can somebody please help me with the following problem?
Out of nothing my T-Mobile MDA Vario stopped giving sound with out the headset connected. without any reason and the out of nothing it stops giving sound without the headset connected. this all happends after i installed tornado (a2dp) to get sound to my bluetooth headset. anyone knows whats gone wrong, i search the forums here but couldnt get no clear answers
I had a similar problem. No sound from the speakers at all, but through the headset it was fine. As if the speaker itself was dead. But it wasn't caused by any Bluetooth fault.
Effectively, the phone hadn't realised that the headset had been unplugged. To solve it I was told to rapidly pummel the headset jack with the headset plug. Somehow, after some time, the phone is jogged back into a working state.
then whats the point havina bluetooth headset if u have to carry ur handsfree to get ur fone ringing again normally aint there any better solutions to this
Hi,
I have a JasJar flashed with the latest qtek rom because it support a2dp.
The problem is that I can pear my bluetooth stereo headphones and hear with all the system sounds (for example the "tick" sound opening the start menu), but when I play any mp3 (using wmp) I can only hear 1 second and then silence. After that I have to connect the BT headphones again but the result is always the same. I installed the a2dp patch (http://forum.xda-developers.com/showthread.php?t=262119) but it does not solve my problem, maybe because it is not a lag issue?!
Another strange behavior is that after using my Jasjar for a bit, a2dp does not work at all anymore...and I have to pair the device again.
Can anyone help me?
Hi alex_time,
The Gurus are still working on this. But in the meantime check this out!
http://forum.xda-developers.com/showthread.php?t=333258
http://forum.xda-developers.com/showthread.php?t=337088
KOR!
Hi all,
Well, after hours trying to search in this forum for a solution to the most common problem with our trinity, the A2DP profile to enjoy our music... I'm like in the beggining: I can't hear my music in my headset, only some sounds and calls.
I'm not sure, due the big number of post I read, about the correct patch/hack/app that I must install, so please, I need advice for this settings:
Trinity: AKA S300 from Vodafone Spain,
WM5,
Original ROM 1.23.164.7
Radio:1.33.00.01
Headset: Motorola S9
I Tried before with zoki A2DP, but doesn't works. So please, before installing any other thing, have you got any advice?
Thanks a lot, regards
Same Problem
Hi,
I´ve had problem with Morotola S9. The bluetooth lost audio for a few seconds. Them returns for a few seconds.
Some Ideia ?
Hi all,
Well, good and bad news about my problem
The good one is that after uninstall zoki's hack and install HTweakC 2.0, execute the tweaks of A2DP, I get my music sounds through the s9
the bad is that I can only hear music in stereo and calls in mono (only by the left ear). Videos doesn't go through headset: simply the sound goes to speaker, like if no headset are connected.
Any idea about this? TIA, regards