Related
I've been using Dopod 818 pro since the end of December 2005. A week ago, a problem suddenly came up. The speaker of this PPC does not work anymore.
I tried to play music using windows media player, or real player -> Does not work
I tried to use the speaker phone -> Does not work
I can't even hear anything when I make a call or receiving a call
It works when I plug in the headset. everything works perfectly.
It plays the ringtone when someone call me. (Very soft sound)
Is this a hardware problem? or is there anyway that I can do to fix it.
I bought the phone overseas (I'm located in Australia now). It takes a lot of effort to send it overseas for warranty.
Thank you
Do a soft-reset. If that doesn't help, do a hard-reset. If that doesn't work , do a ROM re-install. If it still doesn't help, then you have a faulty unit.
I've done soft reset
I haven't done hard reset
->haven't had any backup program.
Is there any free solution for backup software?
Thanks
i ve solution
well for this solution u must disassemble the phone. look at the handsfree jack and apply a jumper to the two front points of the connector. it will solve ur problem
aj0s said:
I've been using Dopod 818 pro since the end of December 2005. A week ago, a problem suddenly came up. The speaker of this PPC does not work anymore.
I tried to play music using windows media player, or real player -> Does not work
I tried to use the speaker phone -> Does not work
I can't even hear anything when I make a call or receiving a call
It works when I plug in the headset. everything works perfectly.
It plays the ringtone when someone call me. (Very soft sound)
Is this a hardware problem? or is there anyway that I can do to fix it.
I bought the phone overseas (I'm located in Australia now). It takes a lot of effort to send it overseas for warranty.
Thank you
Click to expand...
Click to collapse
I've had this problem, what I did was play music using headphone and suddenly unplug the jack. The Speaker works again like charm.
Cheers!
dopod 818 pro speaker issues
I have run into the same issue with my 818 pro and my Himalaya...The fix is always uninstalling one or more applications that may be causing the problem. I assure you it's very unlikely that it is a hardware issue...Uninstall all applications and you should get the sound back..
I have the same problem with my 818 pro. I have already done the hard reset-no change, tried blowing air in and out through the headphone jack, silicone spray and playing with the plug. It appears to be a hardware issue with the sensor mechanism inside so it always thinks it has a headset connected--poor design.
Did anyone else figure out a solution for this (other than returning for repair?) This happened to me this weekend. Suddenly happened after I was using the headphone for an hour while I was rollerblading. Now I can't answer any calls without either the bluetooth or standard headphone. I can hear the ring go off, but just can't use it as a regular handset. I'm sure everyone agrees that this is a hardware issue with a poorly built headphone jack. But while I'm waiting for the retailer to restock the dopod 818 and send me a replacement, does anyone know of a hack that would allow the phone to activate the headphone AND the phone speaker simutaneously? The reasoning is I think the phone currently thinks there is a headset constantly being plugged in, so it deactivates the loud speaker as well as the phone speaker. But if there is a hack that lets WM5 to use the handset speaker and the headphone jack simutaneously, then at least I can answer phone calls without having to use the headset. Of course, this won't be a permanent solution, but it may bridge me through these tough times with the dopod.
I have to say, I still love this phone, but my patience is wearing a bit thin. First, it's the disappearing SD card (which I'm not even sure if it's solved yet), then I was having some problems with sending MMS messages, now this. :x
I had the speaker problem with my Jam. It is apparently a common problem with PPC phones, the mechanical switch in the headphone jack gets stuck. I was able to get mine to work again by plugging in the headphone jack a few times. If that doesn't solve the problem...well you know the drill
There is nothing to do but exchange it--I was never able to find a work around either. Sorry.
I had problem the speaker on my HTC Charmer. I send it for repair and they replaced the speaker, with in like a week+.
However, now there are some other problems. It seems that when I try to use the speaker (play songs, phone, games, etc), the battery drain like mad and the unit gets very hot. The unit drain so much energy that the battery will die off even if I had the unit on AC power. Going to send it back to repair AGAIN!
gunggu said:
I've had this problem, what I did was play music using headphone and suddenly unplug the jack. The Speaker works again like charm.
Cheers!
Click to expand...
Click to collapse
I had the exact same problem and suddenly unpluging the jack works for me..
this "sudden unplugging" thing won't work with Prophet, the Prophet's buzzer(speaker) problem is very common, the same thing happened to me, cost me 12$ in iran to change that part
818pro speaker problem Hardware related
I had the same problem.
Speaker unit in phone burns out very quickly.
If you have warranty - your lucky.
In my case since I bought in Singapore and Use in Israel, I had to fork out 50USD to get a new speaker unit.
Tal
What you do is open the Comm Manager, tap the "phone" icon to set to flight mode. Then, turn on again.... that should do the trick
I don't know what planet most of you guys are on.
The Prophet has a common problem with the rear speaker - it's a hardware issue as X_Farhad has pointed out.
There's no need to hard reset, and what's the crap about flight mode?
Yes, some can have a problem with the headphone socket and the solution for that is in this thread.
Mostly it's the speaker itself. The solution is here: http://forum.xda-developers.com/showthread.php?t=281331
I've found a bit of sponge works better than paper - to see what I'm on about - go to the thread I've posted here.
Speaker issues and phone hangs
I also have similar issues with my Xda Neo. The speakers stops responding when i get incoming call. I mean the phone dosent ring. Then if i try any music player or ringtons, there is no sound. I have to soft reset. Sometime when i get incoming call, it dosent ring and it also hangs the phone. Then i have to hard reset. I had to use that sponge over the speaker and then the speaker works. But sometime it still hangs. Looks like either HTC or Windows Mobile has major issues. I dont know how long this sponge thing will work. Are there any solutions..
sameer
Tal,
I have dopod 818 pro and having the same phenomenon like others, now I'm abroad and can not check the thing with the headset.
Can you tell me please where can I get service in Israel (I bought mine in Thai).
Many thanks
Dotan
sound problem
Dear all and administrator
can you give me solution about my dopod sound problem?
1. I just can used ring tones for receiving new messaging from the my dopod system ( I can't not used ring tones from my gallery/downloaded sound/ring tones application )
2. When new message coming and phone call coming, the sound is very small (can your's give me information how to setting that so the volume can be more loud).
Thank you very much for your's attention, I'm very apprenticed if the solution can being send to my private e-mail address at [email protected]
anyone have solutions on this issue? thanks
Hello
I am really beginning to hate this lousy phone, I have now lost all sound. I picked up the phone to remove some software and noticed I was getting no system sound. So, I opened media player no sound from the music, plugged in headphones and the music was playing. I made a phone call, could speak to and hear the person on the line, I asked them to call me back and nothing.
I have searched the board and found some people saying that the phone sometimes gets stuck in headphone mode, but I was not using the headphones. Anyway I have spent the past 5 minutes inserting, twiddling and removing headphones, but I can not get the sound back, guess it must be hardware failure.
Any ideas or similar problems out there?
Re: Just got phone working the way I want it, NOW ALL SOUND
NewSPV said:
Hello
I am really beginning to hate this lousy phone, I have now lost all sound. I picked up the phone to remove some software and noticed I was getting no system sound. So, I opened media player no sound from the music, plugged in headphones and the music was playing. I made a phone call, could speak to and hear the person on the line, I asked them to call me back and nothing.
I have searched the board and found some people saying that the phone sometimes gets stuck in headphone mode, but I was not using the headphones. Anyway I have spent the past 5 minutes inserting, twiddling and removing headphones, but I can not get the sound back, guess it must be hardware failure.
Any ideas or similar problems out there?
Click to expand...
Click to collapse
I've had this a couple of times and found that a soft reset will sort it out.
I have similar problem--it seems to be the connection to the speaker/ringer. I can get some sound by tapping the top of the case. The small speaker for the earpiece is not affected. Tried resetting anyway to no avail. Will probably send back for repair soon. I am keeping it on vibrate now.
Re: Just got phone working the way I want it, NOW ALL SOUND
TheBrit said:
NewSPV said:
Hello
I am really beginning to hate this lousy phone, I have now lost all sound. I picked up the phone to remove some software and noticed I was getting no system sound. So, I opened media player no sound from the music, plugged in headphones and the music was playing. I made a phone call, could speak to and hear the person on the line, I asked them to call me back and nothing.
I have searched the board and found some people saying that the phone sometimes gets stuck in headphone mode, but I was not using the headphones. Anyway I have spent the past 5 minutes inserting, twiddling and removing headphones, but I can not get the sound back, guess it must be hardware failure.
Any ideas or similar problems out there?
Click to expand...
Click to collapse
I've had this a couple of times and found that a soft reset will sort it out.
Click to expand...
Click to collapse
Paul, how long did you have your phone from Orange when it first happened?
I have had mine around 1 month now, I have 'Soft Reset' and 'Hard Reset' but the problem is still there. Did you get yours directly from Orange or a dealer, have you spoken to either?
I am going to call the dealer tommorrow and try to get them to send a swap out, this is an obvious defect if it has died in a month.
bjrmd said:
I have similar problem--it seems to be the connection to the speaker/ringer. I can get some sound by tapping the top of the case. The small speaker for the earpiece is not affected. Tried resetting anyway to no avail. Will probably send back for repair soon. I am keeping it on vibrate now.
Click to expand...
Click to collapse
Yes resetting does not seem to work, try to get a swap out if you can, I am going to try tommorrow, it has to be a manufacturing fault.
bjrmd said:
I have similar problem--it seems to be the connection to the speaker/ringer. I can get some sound by tapping the top of the case. The small speaker for the earpiece is not affected. Tried resetting anyway to no avail. Will probably send back for repair soon. I am keeping it on vibrate now.
Click to expand...
Click to collapse
I think you are right, it does appear to be a connection fault. I started media player tapped near the speaker a few times and got a second or two of music then it died again, it gives stuttering sound when tapped.
Repair Info
My Dopod 818 Pro unfortunately also has the same problem. Anyone have any advise on the best way to reach Dopod? I am living in NY and I bought the phone in Wanchai. I tried emailing them, but there has been no response. Thanks in advance.
Hi
Just sent my phone back for a new one, Orange confirmed it was a hardware fault and said I was entitled to a replacement phone. Seems that this is a known issue with the Prophet. They would not say though if it was just part of a bad batch, or generally bad manufacturing. I guess we will see when your phones begin to fail.
NewSPV said:
Paul, how long did you have your phone from Orange when it first happened?
Click to expand...
Click to collapse
Hi,
It happens now and then - not more than around one a month. Not a hardware fault in my case just windows doing its occasional bug thing.
NewSPV said:
Hi
Just sent my phone back for a new one, Orange confirmed it was a hardware fault and said I was entitled to a replacement phone. Seems that this is a known issue with the Prophet. They would not say though if it was just part of a bad batch, or generally bad manufacturing. I guess we will see when your phones begin to fail.
Click to expand...
Click to collapse
I reckon it's probably a bad batch. I got mine just after they came out and hardware wise it's been fine.
Hi, can anyone advise as to why I lose the all sounds on an Orange Branded M3100 phone, other that Microsoft voice command 1.6 no other software has been installed! The details of the ROM are as follows
Operator Version: 14.123.1.614
ROM Version: 1.23.61.4
ROM Date: 07/13/06
Radio Version: 1.06.00.00
Protocol Version: 32.37.7010.01H
Here what happens no sound on the phone, reset the phone sound is now back, after a while, don’t know how long but the sound disappears, you get no ringing sound, menu click sounds nothing, reset the phone again and all is back, so it would suggest that it’s not a hardware failure but a software failure, how can I stop the orange branding installing itself after a cold reset in case something there is causing the problem, has anyone else came across this problem?
This is a brand new phone only received it Friday, does it need to go back?
Kind Regards
Dogo
I've recently noticed on my 8525 too, after a while it seems to just go on silent but the setting isn't changed it still set to on and no sound comes out of the phone no matter what program is used.
Phew, I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
To isolate whether this is hard or software you could try doing a full backup. Do a hard reset and let the device run for as long as it would normally take to show the problem, without any additional software. But do run wifi and power intensive applications to warm up the device - as this can cause internal connector problems.
If the problem is gone, this will tend towards a software problem although not an absolute guarantee. There are some issues that are related to both soft and hardware!! For example the screen fading to white issue can be caused by running (power intense) software that makes the device warm and that in turn causes pressure to be put on the screen.
A final thought, the speaker connection block is next to the stylus tip. There have been cases of the inserting and removing of the stylus causing the connector to become loose. This can cause intermittent sound or no sound at all. The warranty voiding fix is easy. Remove back and check connection is tight. No further dismantling needed. Ensure camera toggle arm is engaged before putting screws back in. (Rear Speaker)
The front speaker can also have issues. has spring contacts that can become slack - poor contact with m/board. There is a thread on checking this.
Mike
No Sound, not a Stylus issue
8525, ms voice dial 1.6,
HTweakC 2.0,
SBP Mobile Shell 1.0.0 build 2632.
ROM 1.34.502.1
radio 1.16.00.00
This has been happening about a week, nothing new installed. On Saturday I missed 12 calls because it was "auto-muted" nothing was on mute, just no ring sounds or anything else. I thought it might be some setting, I suspected that it didn't come back after I had set on vibrate for a meeting, so I went through everything, looks good. had to soft reset for audio to come back. Happened again Yesterday morning after being on charger, had to soft reset, happened again this morning after being on charger, had to soft reset. I'm suspicious of the charge ciruits, the phone was placed on a night-stand and I checked to make sure sound was working AFTER i plugged the charger in (i am an on-call engineer for hospitals) when I got up this AM the first thing I checked was the sound, no sound. Had to do a soft reset and sound is fine.
THIS IS VERY, VERY, VERY troubling.
i cant say that my sound has been "loose"
thefunkygibbon said:
i cant say that my sound has been "loose"
Click to expand...
Click to collapse
yep, I agree. My keyboard slider might be loose, but never had problems with the sound.
No sound - possible solutions
I too have had the no sound problem, but I also have a solution (well it seems to work for me and a few other people I know)
I have found that if I have more than about 800 sms messages on the phone (combined count across inbox, sent items, deleted etc...) my phone will decide sometimes to stop making any sounds.
Other symptoms include thew screen not going back to the background when problems are "closed" (well press the X button), sometimes not changing from portrait to landscape.
Hitting the reset key temporarily fixes the problem, but it strike again at any time...
I have seen this on both the official UK orange firmwares
As a side note, more than about 1000 sms messages and 5 unread sms messages and the phone will lock up about 10 seconds after the phone boots up. You have to be quick when the phone boots to go in to the sms inbox and delete 1 message before the phone locks up. This can be a bit tricky but i have done it a few times
from readingmany related threads, it looks like there are several causes for this issue. for me, it was definitely microsoft voice command 1.5 and 1.6. I turned off any notifications from voice command and my problem went away. no calendar voice announcements, no callerid, no bluetooth routing announcements, etc. voice command simply doesn't give up control of the audio sometimes, and it appears to occur most when it wakes up and announces something.
All I use voice command for now is voicedial. try that a while and see if you are fixed.
1.5 was worse, but 1.6 does it too.
good luck!
wes
saga continues
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
labrati said:
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
Click to expand...
Click to collapse
I have just read your last two posts. I am wondering whether you are saying you have a sound/ringer problem OR whether you mean the phone sometimes crashes and therefore does not ring (i.e. you then need a soft reset) and sometimes you discover you've missed a call but never heard it ring.
If the above is true then I think you need to look for the solutions for avoiding hangs/freezing. I can guide you to these or a search will show them. It certainly does not appear that you have any physical problem with the speaker/earpieces.
Mike
dogo said:
Phew , I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
Click to expand...
Click to collapse
Hi, I never had a sound issue untill I started usin my HT820's, but have noticed a few times lately that my device sounds arent working, (I dont mean always through to the bluetooth headset) and I just power off/on the device, I dont get that many calls, so I havent missed any, and wasnt sure if it was rom or bluetooth related for sure, but I do usually leave my bluetooth on, just not always the headsets, it also doesnt happen a whole lot.
Loose connector
I'm not sure if this will help anyone, but i was losing sound on my 8525. I had dropped my phone twice and the rear speaker connection had gotten loose so i opened it up following the directions at http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
and now i have sound again.
Continued Issues
Mike, thanks, the issue isn't with the phone locking up at all, it's been very stable, I think I've soft-reset probably 3 times in two months.
The phone literally will stop emitting any sounds. I can still hear if I place a call and if I place that call on speaker phone it's fine. However if you call the phone, try to play an audio file, etc there is no sound that emits from the device.
It did it AGAIN today, I tested, was able to place a call and put it on speaker and called it with my other phone, the pop up screen announcing the inbound call came up and everything else on the phone worked as it should (except no ring). I then went to settings phone and hit ok (top right of screen). BAM.. sound was working on the device again, inbound calls ring, able to play audio etc.
I did note one other possible anomaly, I have my PTT mapped to initiate voice command, when trying to use this I was unable to initiate voice command. After going to phone and pressing OK, voice command started working again. W/O voice command I'm sunk, I have 500+ contacts.
I placed a call to AT&T and I'm back on the "chronic retention" list.. ughhh.. I went through 8 treo's last time. I don't want another basket of refurbs to deal with, I like WM so much better than previous interfaces.. any ideas are very, very, very welcome.
-mike
More information
This morning, the sound was gone again, but I went into settings and started playing to see what else might induce it to work again, I tried voice command again, disabled and re-enabled, that didn't work.
I then went into sounds and that didn't work, went into Today, and Buttons neither of those worked, but when I went into input (didn't do anything, just opened it and closed it) sound started working again.
Hopefully, none of you guys have a newer ROM with the loud startup animation and attempted to turn down that volume via the registry as outlined in the wiki. Unfortunately, doing that also lowers the speaker volume so I just disabled the animation instead. Phone and bluetooth sounds fine but mp3 and everything else were also lowered to a whatever level depending on the startupanimation volume you set.
update
It did it to me again yesterday, this time only going to settings phone and pressing OK would make sound come back.
Today, the phone refused to dial or emit any sound. Would not come back after soft reset (would not dial, no sound) had to do a hard-reset (removed battery). After first soft reset a windows came up to advise that mobile voice command couldn't start...
For a darn near $500.00 phone this is pretty sad. Love the phone but gee whiz...
Daily occurance
Well, it does it every single day at least once a day, and I've noticed the phone has slowed a lot, sometimes during SMS or email the cursor goes away or I have to wait 20-30 seconds for words to complete typing after I've finished. I guess I'll get my refurb next week. Perhaps go back to palm.. dunno...
possible fix?
I turned OFF the SMS message sounds and it seems to be working w/o losing sounds again! I'll let it run for a couple of days and see if this is the deal, but I now have no audio announcement for ActiveSync, POP email, SMS, or MMS. I do have audio/vib for missed calls. Anyway, it's been up and running fine all day. Good Grief.
no fix in sight
On hold with ATT right now for another phone. It did it again today at about 10AM. Strange, it may be time sequential, but it didn't do it at all yesterday.. it was great to have the phone ring.
Hey all, im glad this site is up its been great finding what i can really do with my wizard!
here is he issue im having. the wizard has 3 different speakers and 1 microphone. 2 side speakers (used to play music, or speaker phone) and the 1 main speaker (used for hearing calls). none of the 3 work when im making calls, listening to music, alarms, or any of the "screen click" sounds and the microphone doesnt work on phone calls or note recordings. however, the one time the speakers do work is when i have an incoming call, i tried listening to see which speaker its coming out of and it sounds like all 3. the headphone jack still works so thats what ive been using. pressing the speaker phone button while on a call (that i cant hear) doesnt do anything, the UI doesnt show any change or switch to indicate its changed to speaker phone and the "speaker on" button doesnt change to "speaker off" like it used to.
originally i thought this was a ROM issue, i was using the manufacturer's ROM (cingular 8125, unlocked for tmobile service) so i followed the lovely tutorial and switched my phone over to the t-mobile 2.26 ROM. this had no effect, so I then upgraded to XDA's WM6 ROM and while i love this new ROM it still did not fix my sound issue.
im stumped, any help anyone can offer would be great. I wanted to post here before i crack it open to look at all the insides.
same problem!
I'm having the exact same problem! I just noticed the problem recently, when my phones alarm didn't sound. I'm running a custom cooked rom from mattk_r 318 kitchen, but I don't think the rom is the problem, as i am indeed still hearing sound from the head phone jack. I don't think the internal speakers are broken, as when a call comes, the phone rings, and the sound come out from the speaks as mentioned above!
Help!
dropped?
have you ever dropped your phone?
I have dropped mine a couple times and thats the only cause I can come up with. But this never seemed to be a problem until recently.
no major drop recently.
i havent really dropped it recently at all.and for some reason i dont think the hardware is the problem,because i tryed voice recorder,and it records my voice and i can play it
back through the headset.so that confirms that the mic and both spealers work (rings
when incoming call). i really dont want this to be the downfall for my wizard! is there
any key registry entrys for sound maybe that we could have a look at? btw my wizards a G4 if thats makes any difference.
please help!!
mine is a g3, if it were a software issue then reflashing should have solved it. right? i dont know enough about the internal workings of the wizard to know what a flash actually does.
?
Anyone have any ideas on what I can try?
Well, a flash is an OS upgrade/downgrade. It contains drivers, programs, registry settings, things of that sort. Sounds like your problem is hardware related, nothing to do with the OS itself.
I assume the warranty on that baby has already expired, so you're pretty much on your own.
Two options come to mind:
1. The obvious... buy another Wizard
2. The not so obvious... buy another Wizard with a broken screen and take all of its guts out and put them in yours.
A third option also exists... (ther's always a third way)
Mind you, this is for INFORMATION PURPOSES ONLY! In no way do I condone the below mentioned method.
Get a new line of service with Cingular and buy the Wizard to use with it. Exchange their boards, swap the IMEIs using the Wizard Service Tool utility found on these boards, cancel the line of service and return the "new" Wizard.
Sound issues
I have had a similar problem but located my problem to the microswitch which is in the headphone socket. Might be worth trying pulling the headphones in and out a few times to see if it allows the microswitch to release (if that is the problem?)
Steve
The wizard is magic
Some how my wizard seemed to repair it self. Its sound is working again...i didn't reflash or do anything special....weird. I think its because the phone had a good vibrate....ive got one of those speaker docks for the wizard..i put it in there...got a phone call and talked and stuff...but while it was in there (with the mic plugged it) it vibrated alot...maybe that flicked the switch mentioned above?
weird..this phone never ceases to amaze me. I just hope it doesn't happen again... because it appears to be emerging as a problem as the wizards get older?
Keep up the good work guys!
LOL!!!!!!!!! its so simple and yet so amazingly smart
wow, Steve you are the most amazing person EVER!
I put the headphone piece in about 1/10 of the way and slowly made a swirling action as i slid it all the way in, clicked the start button on wizard and i heard the "click" for the first time in a month!
Thanks!
I tried different options to get my sound back, no luck so far
Problem started after using the headset-connector to connect it to an FM-Transmitter.
After reading this thread, my guess is that the "micro-switch" is in a wrong position. So I opend my MDA, but can't find any "switch" in that connector.
Is there some more info about that connector, a connection-diagram perhaps ?
what worked for me was inserting the headset jack in roughly, robbing each side of the headset jack to try to hit the "switch". that might work for you.
Yes!!! Thank you a lot!
I have the same problem, no sound in my speakers, just vibrate and sound in handsfree. I figure out that this micro-switch could be the problem, but I haven't know how to solve it. Thank you once again, I love my SPV!! and this community.
Fixed!
Woohoo!
This problem just cropped up for me on the weekend.
Thankfully it wasn't long before I happened across this thread.
About a minute of persistent jiggling the microphone jack did the trick.
Thanks!
Hello,
i seriously need help.
Until this morning, my X1 worked. Over the last few days I was playing around a bit with various TF3D options, etc. I should note that I did not touch the ROM.
Then suddenly my phone gave no sound anymore.
No audible resonse to a stilus click on the screen.
No sound from FM radio.
No sound from phone (neither ring nor can I hear the caller).
(Vibra alarm works when activated though)
When switching to speakerphone I hear a very soft static crackle when doing the switch. Just as if the speaker is turned on. But then - no sound at all.
No microphone function on phone (caller cannot hear me).
No sound via headphones on phone.
No sound via headphones on MP3 playback.
Everything else appart from sound works. Even the phone can make a connection when calling - you just hear nothing.
I tried a soft reset. Nothing - still no sound.
Then I tried a hard reset:
Obviously the hardware of my speaker is ok. Because when I make a hard reset, there is the "pling" sound to inform me, that I should calibrate my screen.
Then there is another "pling" when the message appear, asking if I want to get the automatic provider settings updated.
But afterwards - no sound at all in the whole phone.
Then I went to update the ROM, thinking I might have (no idea how, but you never know) done something to audio drivers. I replaced my German T-Mobile ROM with the prepared German ROM without branding from this thread:
http://forum.xda-developers.com/showthread.php?t=446070
But still - same result as above.
Anyone got any idea?
Really nobody having any helpful comment?
did you try to change the radio??
I flashed a whole new ROM - same problem persists.
Besides: It´s not a Radio problem because system sounds and MP3 playback don't have any sound either.
Stating the obvious
Sorry to state the obvious but it sounds like the connection or the speaker module has gone. Have you recently tried the head phones on the X1? please see below link for a possible reason.
http://forum.xda-developers.com/showthread.php?t=282553
excersise your right to return
Regards,
Creamy-Goodness
Hello Creamy-Goodness,
thanks for you input.
If there was somewhere a hardware switch for sound output to speaker or headphones (which I doubt) that is stuck, it would not explain why I have neither sound in speaker NOR headphones. (One would assume that depending on the position of the switch at least one of the two should work.)
Apart from that I only tried the headphones to troubleshoot the problem after I found out there was no sound.
Nevertheless interesting, that this happens to other devices.
Speaker module cannot have gone either. There is an audible system sound from speaker right after hard reset to inform me that I need to calibrate the screen - but no sound anymore afterwards.
I will try to have the device swapped next week.
reg. sound issue
I'm suffering from the same problem here.
it only freggin vibrates.
TheMobilist said:
I flashed a whole new ROM - same problem persists.
Click to expand...
Click to collapse
Usually there is a simple fix which involves replacing a DLL, but not in this case of course - unless that ROM includes the bad DLL. I seem to remember it was a problem which occured after installing TF3D, but I couldn't find anything when searching just now.
It might be worth you checking the ear-speaker sound (make a phone call), as there is always the possibility that sound is being re-directed or intercepted (by something like Troca2). Check what programs and services are running.
Tests should be done with a known-to-work-fine-ROM of course.
Okay, I finally got the original ROM to flash the X1 back.
And strangely - when after one week of not using it I turned it on again to flash the phone, I got my sound back.
I have absolutely no idea what happened and why, but I am glad that I do not have to send it back.
@k_ash82
What I did is:
Turned my X1 off (not just stand-by), really off.
Waited one week.
Switched it on again.
I had my sound back.
No idea why, but maybe that works for you as well?
Just try it and please post your experience.
It would be very kind of you to share the german t-mobile stock rom with the community . Perhaps it could be added to "Xperia ROM and Guides" Thread, too.
I have no sound sometimes with this rom
http://forum.xda-developers.com/showthread.php?t=460190.
After switch off and turn on the phone again the sound is back.
Karsten
i have original sony rom (no branding) and also the same problems
no sound after a while (sometimes when phone goes in standby, sometimes just without a reason)
cannot play any sound in no application (media player,core player,etc) also the phone ringing or sms sound is off.
but the most annoying thing is, i can make a call, the call goes through, but I can hear nothing from the called person.
sometimes it works when i switch of the phone and restart, but sometimes I have to do 4 or 5 restarts.
the phone is now 1 week old, an I haven't installed Touch3D or anything like that, because I made hardreset and left the original configuration on factory settings, just to make sure, that it's no software error.
anyone got a solve for this problem actually?
if I ask google, there are many people with this problem, but no solve found till now
i have an issue with the speaker too but not exactly the same as the one described above.
my speaker still plays sound but it is about 10% of the original volume when it is already set to loudest (you have to put your ear right next to the speaker to hear the sound)
after i re-flashed the rom, it worked normally for about half a day until the problem returned
can anyone please help??
i keep missing my calls ><
thanks
this is a well known issue on some X1 phones ! you cant fix this with any software-update because it is hardware related. some x1 phones have it like every 2 weeks, others 3-4 times a day. most of the time you can just reset your phone but this is not a solution.
you have to send it back to SE in exchange for a new one.
i called my provider (o2) and they delivered a new x1 _on the next day_ in exchange (they have a 48 hrs delivery/pickup/return service).
the new phone works just fine !
- QuadWord