Database Users

XDA Exec - loss of sound from all speakers except phone ring

All sound from stereo speakers, phone speakers , mic are not working.
Only ringtone if phone rings.
you can only hear system sounds with headset and talk with headset.
Any ideas?

Have you tried turning the volume up?

darkblak said:
Have you tried turning the volume up?
Click to expand...
Click to collapse
I wish it was that simple, but alas I tried a lot , and it looks like I might have a faulty one unless anyone got an idea

I find it hard to believe that it's a hardware issue if both the external speakers and the headphones don't work at the same time yet the ringtones do work.....
I hope it's something simple and you don't have to resort to a phone return.

No Sound
Has any one found a solution for this problem, as I have the exect same issue. All sounds on exec dont work execpt when receiving an incoming call, when call is answered cant hear a thing, does work though with headset.
Have tested and sms, mms etc sound doesnt work, movies and music doesnt work either.

This is not going to help :roll: but I had a similar problem a few months ago on my XDA2. Phone rang, I tried to answer it, but couldn't hear a thing. No other sounds worked. Headphone worked perfectly. Soft resets achieved nothing.
Thought my XDA2 had died after 18 months of service, but then suddenly an hour later it all started working again and did from then on.
I have no idea why this happened or whether I did anything to fix it, but the problem isn't unique to the Universal.
I'm running PocketZenPhone. Maybe that could be interfering with the sounds somehow? Dunno.
Edit: I doubt it's a hardware problem so I definitely wouldn't risk sending my shiny Exec back to O2's monkeys for them to replace with another broken one. Did you try a hard reset? I didn't on the XDA2 but maybe it'd help. :?:

Try this...
Maybe you should try this, I use it in order to transfer all the sounds (including music) to the BT Headset when I am at the gym:
-Get Total Commander
-Go to the registry editor
-Tap or search for this directory: \\\registry\HKLM\SOFTWARE\OEM\VoiceCommand\
-Change the value of the String LaunAPEnable to value "0".
-Now press and hold the main button on the headset (the one you use to answer calls and transfer the call to the speaker of the Universal) and try if this worked.
-If you succeed or not revert the value of the string back to "1" or you will not be able to use VoiceCommand.
Hope this can help you.

Problem SOLVED. No sound
I had the same issue with my Jasjar. When you plug in the headphones it turns off the speakers except for incoming ring tones. The inside of the ear jack got stuck. I had to take apart the unit and bend the clip. It contacted so that it didnt' think there was a headphone inserted. I don't ever remebering plugging in a headphone to even have cause this problem. Its just a very loose contact. So when you get in there you bend it to make it stronger. You will understand once you have it apart.

Sound problem

There is no sound. I plugged in the head phones and i can hear out of that, but when i unplug it, i get no sound. It's like its still plugged in. Can anyone help me, or has anyone else experienced this?
sorry i have an o2 xda neo

Might be another instance of a known design issue with Prophet. Many people have hit this problem - mine did this and needed to be returned for repair.

Try putting the headphone jack in again and then out. Repeat like this for a while and your sound will come back on. If it doesn't, repeat faster.
This is a known issue where the sound disappears. Basically, a switch needs to be flipped for the prophet to know that the headset is out. Sometimes, this switch doesn't get flipped and the prophet thinks the headset is still connected, while actually its not.
If my solution sounds a bit crazy, it is...but its the only way and you don't need to send it in for repair. Search around and you'll find the same solution everywhere. People have also used a safety pin. But best is the headset jack itself.

How long mate? 2 hours? 3? I wish it had worked that way. I tried everything... still no sound. I think it is a crappy hardware. I think HTC should collect all prophets... I mean if it were a decent company.

Its just a little lower quality hardware, I agree.
If that doesn't work, try soft resetting. If that doesn't work, try hard resetting.
Its better to try all options before sending it in to the service centre, where it'll get screwed around and probably be kept for 2 weeks or something, due to "unavailability of parts"..

It is not working, removing and inserting again n again, some other method, i will have to try to open it, as it is not under waranty and it is also without bill, plz suggest me something

This seems to be a major problem with the HTC Prophet as a whole regardless of the branding. I have returned mine to Orange for a replacement, they confirmed that it was hardware failure. I thought that I might have just got unlucky with a bad batch, but looking across the NET and here, it appears that all brands based on the HTC Prophet are failing.
Obviously, shoddy manufacturing, I guess HTC did a little penny pinching with the speaker system.

I have same issue with my dopod 818 pro the plug and unplug trick did not work for me I have to send my to http://www.PocketPCTechs.com they have the device repaired for me now my device is back to business now..

I have the same problem here but i bit different... i was using an external speaker system, when i unplugged the jack from my spv m600 i did't get any sound the only sound i have is when i receive a call then i hear the ringtone but when i pick up i don't hear anything and probably the other side doesn't hear me...i tried to put the jack in and out but no results now i am obliged to use my phone with the headset...

same problem...solved!!
hi, today i had the same problem...no sound at all after i unplugged an external sound system. I plugged again the 2.5mm and unplugged it very fast a few times untill i got my sound back!!!
good luck
pixie

My m600 has been back to Orange for repairs for this problem. Works again perfect now.
Robin

PhoenixAG said:
Try putting the headphone jack in again and then out. Repeat like this for a while and your sound will come back on. If it doesn't, repeat faster.
This is a known issue where the sound disappears. Basically, a switch needs to be flipped for the prophet to know that the headset is out. Sometimes, this switch doesn't get flipped and the prophet thinks the headset is still connected, while actually its not.
If my solution sounds a bit crazy, it is...but its the only way and you don't need to send it in for repair. Search around and you'll find the same solution everywhere. People have also used a safety pin. But best is the headset jack itself.
Click to expand...
Click to collapse
I had the same problem today, googled, found this thread, followed your solution..... and it works fine again!
Thank you very much!

DrStein666 said:
I had the same problem today, googled, found this thread, followed your solution..... and it works fine again!
Thank you very much!
Click to expand...
Click to collapse
Does not always work.
It did not do the trick for me for sure. Orange had to repair it for me.
Robin

sound problem fixed by yourself
Hi all!
very easy! Just plug-in and plug-out hand-phone abit strong, it will get back!
lucky!

Thanks !
Worked for me !
Youpy

MDA Compact II and no sound

All,
I have a MDA Compact II using the latest T-Mobile ROM and experiencing a problem regarding incoming phone calls and text messages notifications. I have set the phone to ring full volume and text messages are assigned to an audio notification. Occasionally when I receive texts/phone calls there is no audio notification even though they are switched on. I am missing quite a few phone calls and the only way to get the audio notification back is to soft rest the phone.
Does anyone know how to get around this?
Thanks
M

Just to say I have exactly the same problem. phone working fine for 3 months then sound only after soft reset, then stops working after a couple of days. i cant attribute it to any event

U2 have probably a program installed which is eating up sound handles (i.e. not releasing them after usage). A soft-reset releases them of course. So you have to uninstall some 3rd party software to find the nasty one...

No Audio
Hi
Am running a T-Mobile Compact 2 with WM5, also installed is Spb Pocket Plus
I have no audio for any Windows Media Files or for any sounds / notifications e.g. the alarm. I do get audio playback and notifications through wired headphones. The phone will ring and vibrate when called.
2 Soft resets and the removal of an Alert progam unwittingly installed from Skyscape (medical and nursing texts for PDA) have not resolved the issue.
I have been into sounds and notifications and ticked all the relevant boxes. Interestingly in notifications I ticked the box for the device to vibrate when using activesync. It was vibrating but not making any sounds earlier.
One of the seniour guys at Pocketnow.Com has suggested that I have somehow turned down the speaker volume. If so - how do I turn it back up? Trust me when I say that the standard volume display shows volume at full.
Any ideas?
Will.

Hi
I've just got back into work tonight and synced with my work PC. When active sync started up the audio came back online. I have no idea why.
Any deas?
Will.

Still No Audio
Hi,
Last night the audio on my T-Mobile Compact 2 came back online when I was synced with my work computer - great! I even unplugged the USB lead and audio remained. I then resynced and carried on listening to headphones for a few hours while I worked. When I disconnected I found that Audio had died again. I therfore assumed that it was an issue with Activsync 4.1. I deleted the sync relationship on both my device and the PC, did a soft reset and created a new one. Still no audio.
Does anyone have any ideas about what is going on? I am thinking about a hard reset if no one has any thoughts.
Will.

Hi,
have just tried calling my deviced from a landline, what i've found is that the device will ring but that I am unable to communicate using it (Can't recieve or send voice) unless I use the wired handsfree kit. Have not tried a bluetooth headset.
Will.

Sound problems with telephone
If your PDA works when playing sound files but you cannot hear anything when telephoning, the problem is usually bad contacts on the phone earpiece.
The PDA has 2 speakers, one for sounds and a smaller one for the telephone.
You must open up the animal and clean the contacts on the motherboard.
Hope this helps.
Bob

I have the same problem...sound is often working normally, but sometimes it just stops for a few days or longer. It is very annoying to always take the wired headset with you. Soft-resetting does not help in my case. I also have SPB pocket plus installed and a wireless network SDIO card. I could however not find a general rule that makes the sound stop... e.g. installed software or activesync problems.
I read earlier about cleaning up the speakers, but I have no idea how to open up the phone. Suggestions?

It could be the problem from the wired handsfree jack/socket, once you are taking the pin out, the socket is not switching the device speaker functionality back.
The picture attached is for illustration only, and the functionality is to cut all the sounds from the device and through to the hansfree, and once the handsfree is out then to restore the device's original sound system.
Not 100% sure but someone can try to clean the jack without opening the device.
1. Switch-off the device, remove the battery, leave it for 10-15 minutes.
2. spray a minimum quantity of CONTACT CLEANER ( http://www.maplin.co.uk/Module.aspx?ModuleNo=4153&criteria=contact cleaner&doy=15m11 )
3. Leave the device again for 10-15 minutes to evaporate any moisture
4. Put back the battery and try now.
GoodLuck
Sidd

Has anyone tried yet??

yes, hands-free socket could be the problem
My beloved Jam suddenly lost sound yesterday, and it does seem to have been caused by a physical failure inside the hands-free socket. I was able to fix the sound by opening up the device, opening the little black box that houses the socket, and tweaking the contacts.
All sound suddenly disappeared except for bluetooth and the wired hands-free earphones. Without using those accessories, there was no phone audio, no sound from speaker (from ANY source), and--interestingly--the mic did not work at all. But calls worked fine through the BT headset, and all sounds from all sources came through the wired earphones when they were plugged in.
This evidence all pointed to the existence of a switch inside the hands-free socket that was stuck, telling the device to send all sound to the wired earphones even when they weren't plugged in. After opening the device and the box that houses the socket, I pried the contacts a bit with a pocket knife, hoping to ensure that when the there's no jack inserted in the socket, the device will know it. Sure enough, after I put things back together, sound is once again functioning properly. Whew!
BTW, the problem started after I took the Jam skiing so I could listen to music. It might even have been caused when the earphone jack was violently pulled out at one point. Anyway, I had already decided not to try that again, because the Jam seems to stop functioning reliably above 9,000 feet.

Hi, I had the same problem as all of you, what i did to fix it was...
1. plug in handsfree
2. pull handsfree ^up^
3. now slowly pull out
This should cure the problem as it cured mine

thousand thanks to Ayyub and mtn_lion. i'm glad i went to page 2 of this topic. now i can invest my time for important projects. the importance of sharing ideas in this world will help evolving each other without having to go through the same paths again. to everyone reading this: it's okay to share your painful steps even though you didnt find a working solution! dont make others do the same mistakes over and over again. support the evolution. it could save your life and millions of others soon or later.
polar20

We have to thank everyone who posted in this topic. Without them, we would mostly still be struggling. Great contribution folks!

same problem here
I, too have an t-mobile MDA and have had the same exact sound problem with and and have exchanged two with t-mobile - all three lost sound after a day or two and the only thing that brings it back is a soft reset. I do NOT use a hands free unit pr plug anything into the headphone jack so that's not the problem. T-Mobile claims to know nothing about this problem....
Jim
Littleton, CO

well, i was experiencing the same problem when uninstalled "pocket zen phone" application. after uninstall, charmer sometimes lost sound completely and only softreset brings the sound on again. hardreset solved this completely, not using PZP anymore...

Hi I have this same problem with my T-Mobila MDA Vario II, it did hapen before to me but i just did hard reset and thath solved the problem, but this time it didn't helped. I allready reflash MDA with 3 different systems and still this same, i was trying to plugin in and out handsfree kit but that didn't help. MDA doesn't have any sound now, only thrue handsfree kit. Is any one have any more ideas what i can do?

It unblocked it self after 24 hours lying on the shelf, so still don't know what's couising the problem.

Strange sound issues (this is a tough problem!)

Hey all, im glad this site is up its been great finding what i can really do with my wizard!
here is he issue im having. the wizard has 3 different speakers and 1 microphone. 2 side speakers (used to play music, or speaker phone) and the 1 main speaker (used for hearing calls). none of the 3 work when im making calls, listening to music, alarms, or any of the "screen click" sounds and the microphone doesnt work on phone calls or note recordings. however, the one time the speakers do work is when i have an incoming call, i tried listening to see which speaker its coming out of and it sounds like all 3. the headphone jack still works so thats what ive been using. pressing the speaker phone button while on a call (that i cant hear) doesnt do anything, the UI doesnt show any change or switch to indicate its changed to speaker phone and the "speaker on" button doesnt change to "speaker off" like it used to.
originally i thought this was a ROM issue, i was using the manufacturer's ROM (cingular 8125, unlocked for tmobile service) so i followed the lovely tutorial and switched my phone over to the t-mobile 2.26 ROM. this had no effect, so I then upgraded to XDA's WM6 ROM and while i love this new ROM it still did not fix my sound issue.
im stumped, any help anyone can offer would be great. I wanted to post here before i crack it open to look at all the insides.

same problem!
I'm having the exact same problem! I just noticed the problem recently, when my phones alarm didn't sound. I'm running a custom cooked rom from mattk_r 318 kitchen, but I don't think the rom is the problem, as i am indeed still hearing sound from the head phone jack. I don't think the internal speakers are broken, as when a call comes, the phone rings, and the sound come out from the speaks as mentioned above!
Help!

dropped?
have you ever dropped your phone?
I have dropped mine a couple times and thats the only cause I can come up with. But this never seemed to be a problem until recently.

no major drop recently.
i havent really dropped it recently at all.and for some reason i dont think the hardware is the problem,because i tryed voice recorder,and it records my voice and i can play it
back through the headset.so that confirms that the mic and both spealers work (rings
when incoming call). i really dont want this to be the downfall for my wizard! is there
any key registry entrys for sound maybe that we could have a look at? btw my wizards a G4 if thats makes any difference.
please help!!

mine is a g3, if it were a software issue then reflashing should have solved it. right? i dont know enough about the internal workings of the wizard to know what a flash actually does.

?
Anyone have any ideas on what I can try?

Well, a flash is an OS upgrade/downgrade. It contains drivers, programs, registry settings, things of that sort. Sounds like your problem is hardware related, nothing to do with the OS itself.
I assume the warranty on that baby has already expired, so you're pretty much on your own.
Two options come to mind:
1. The obvious... buy another Wizard
2. The not so obvious... buy another Wizard with a broken screen and take all of its guts out and put them in yours.
A third option also exists... (ther's always a third way)
Mind you, this is for INFORMATION PURPOSES ONLY! In no way do I condone the below mentioned method.
Get a new line of service with Cingular and buy the Wizard to use with it. Exchange their boards, swap the IMEIs using the Wizard Service Tool utility found on these boards, cancel the line of service and return the "new" Wizard.

Sound issues
I have had a similar problem but located my problem to the microswitch which is in the headphone socket. Might be worth trying pulling the headphones in and out a few times to see if it allows the microswitch to release (if that is the problem?)
Steve

The wizard is magic
Some how my wizard seemed to repair it self. Its sound is working again...i didn't reflash or do anything special....weird. I think its because the phone had a good vibrate....ive got one of those speaker docks for the wizard..i put it in there...got a phone call and talked and stuff...but while it was in there (with the mic plugged it) it vibrated alot...maybe that flicked the switch mentioned above?
weird..this phone never ceases to amaze me. I just hope it doesn't happen again... because it appears to be emerging as a problem as the wizards get older?
Keep up the good work guys!

LOL!!!!!!!!! its so simple and yet so amazingly smart
wow, Steve you are the most amazing person EVER!
I put the headphone piece in about 1/10 of the way and slowly made a swirling action as i slid it all the way in, clicked the start button on wizard and i heard the "click" for the first time in a month!
Thanks!

I tried different options to get my sound back, no luck so far
Problem started after using the headset-connector to connect it to an FM-Transmitter.
After reading this thread, my guess is that the "micro-switch" is in a wrong position. So I opend my MDA, but can't find any "switch" in that connector.
Is there some more info about that connector, a connection-diagram perhaps ?

what worked for me was inserting the headset jack in roughly, robbing each side of the headset jack to try to hit the "switch". that might work for you.

Yes!!! Thank you a lot!
I have the same problem, no sound in my speakers, just vibrate and sound in handsfree. I figure out that this micro-switch could be the problem, but I haven't know how to solve it. Thank you once again, I love my SPV!! and this community.

Fixed!
Woohoo!
This problem just cropped up for me on the weekend.
Thankfully it wasn't long before I happened across this thread.
About a minute of persistent jiggling the microphone jack did the trick.
Thanks!

Microphone on headset not functional. any solutions?

I have a german version of X1 , almost everyting works fine but with a little problems. i am a 3-year WM user and know the basic stuffs of this OS.
but the worst thing is the mic on headset dosen't work at all, the button and the speaker are good.
dose anyone have the same problem with me? and what should i do?
thanks

On my phone the headset jack needed a really hard push to go all the way in. Make sure you really have pushed it as far as it goes. But I guess you already tried that, huh.
Should be an easy thing to get replaced at the store though.

Returned my first X1 because of a not-working button >and< microphone of the headset (ordered via internet). The replacement phone had the same problem.
In the accompanying shop, which I finally visited, also a third phone did not work. They tried a bit more when I left and discovered that it can work if you connect the headset >when< a call is received...
Also, they reported that it is not a know problem for the X1.
Well, with three not-working phones it seems to be a problem!

Maybe a headset problem instead?

my headset doesn't work if the phone is on vibrate or no sound mode. If I change the phone to normal then the headset works. Touch cruise headset works on vibrate mode. I am not sure if other people have the same situation. I only the put phone in vibrate mode at work so if I want to use headset I just change phone to normal, life goes on.

same problem
By using voice recording it uses the mic from the phone. i think it's a problem of the software. It does not switch... maybe a registry issue...

i have the same issue, and its a hardware problem, because if you plug it a couple of times, sometimes works and sometimes dont...
someone has found a solution to this?