Database Users

True VGA with the latest Imate ROM

HI there
I installed the vga hack, but I get some strange behavior on the today screen top bar no clock no phone symbols, no ok text only a square...
Better than explain it here it’s a screen shot:
Can any1 send-me the right vga Files or help-me solving this ?
Thanks

When you instaled VGAhack, you must copy 12 files to PDA to directory Windows?
I think you don´t copy this .dll files, and you don´t see anything in top or bottom bar on your PDA :wink:

You don't have the right files for AKU2. Download from:
ftp://xda:[email protected]/Universal/Tools_Programs/VGA_AKU2.zip

Did you manage to make it work?
Does it slow down the PPC?
And the "VGA hack" you mentioned, it's just this files, or I need something else?
Thanks in advance.
vmiguel

http://forum.xda-developers.com/viewtopic.php?p=318286&highlight=#318286
Follow the instructions here and like the last person said: BACKUP BACKUP BACKUP before you make ANY major changes to your PDA.
I have not noticed a slow down or a battery drain. But you do need good eyesight.

hi thanks for the answer.
But i still don't have the top right corner info (U / network level/battery)
i don't want to hardreset, but maybe i have to do it and start from a clean install....
what are the dlls that control the topbar, do you know ?
I also don't have the software keyboard (strange)..

Sorry dunno. I have the latest Qtek ROM and what I posted works perfectly. You just need to: Take the dlls in the original zip and then overwrite them with the AKU2 ones. Copy the dlls on the SD, move them to the windows folder on the phone, run sdkerts.cab and then move to truevga. Oh and vjbigphone cabs as well.
That does work. Check to make sure you copied ALL the dlls

Found the problem: my ozsetings
i should had
MenuBar Font: Bold 900
System Font: 1200
and i had
MenuBar Font: Bold 1300
System Font: 1500
So its fixed and i return to full vga
thanks for all you help.

2nd splash disappeared, not a welcomehead.96.png problem!!

My second splash screen (Windows Mobile) has disappeared. ATM only a white screen and fortunately I can boot.
I copied welcomehead.96.png to my PC to see if I can edit it (YES) and back to Wizard \windows folder and still same white one...
Any suggestions (I do'not want to flash or something like that because it takes a lot of time to shapen up the programs installed)
BTW, I have AKU 2.3 Mr. Clean 2.24 ROM. I can't edit extended_rom because of Wizard Extended_Rom 2.xx restrictions (no solution yet, at least I couln't find anywhere, Just Buzz was working on it)
:?:

I had this happen to me too, if you are using your own one, just replace the files again. But if you are not sorry you will have to find someone with that file. I copied it in 2 times and it works ok now!

Find what? an original "welcomehead.96.png file" ?

ya, cus i have changed my, but i did not like it so i did not keep a copy of the one it came with!
(cus the 1st file i put there did not a thing but then the 2nd one said to replace the file and i said yes!)

...It isn't dissapeared. Just delete the new one and voilà, there it is: the original.
I myself got a white screen after I installed pocketRSS reader...

Exactly the same program "pRSSreader". After installing it just a white screen. Will give a try to delete.
I have replaced it many times but nothing changed. Deleting might be a solution as yours
I'll post if I manage
Thanx

fordcan said:
Exactly the same program "pRSSreader". After installing it just a white screen. Will give a try to delete.
I have replaced it many times but nothing changed. Deleting might be a solution as yours
I'll post if I manage
Thanx
Click to expand...
Click to collapse
NOPE, didn't worked for me. I deleted ones, there u go, the original ROM file. but nothing changes.

...only when you uninstall pRSS the whitescreen disappears. It doesn't matter whatever you do.
But IF you have no pRSS anymore then you can regain the original welcomehead.96.png, because it's not gone but hide away...

Easily changed 1st splash with rom update (seems harder) but I'll give up the 2nd one because I like to use pRSSreader. Maybe ask the developer for a bug.
Thanx anyway

I tried deleting the welcomehead file but Resco says it can't be deleted as its in ROM.
I have the same problem, installed pRSSReader, it made my screen disappear. So I uninstalled it but the problem is still there.
Any fixes?
I would try the ones above but I can't seem to delete the png file.
Thanks..

copy welcomehead.96.png from Windows folder to anywhere(can be your PC) and copy it back to Windows folder.
think it will work

I tried that. It doesn't seem to work
I renamed the welcomehead.96.png file and then I deleted the renamed one. It created a new png file which, when I open, I can see is the Windows Mobile screen.
But it doesn't show on startup.
I also tried copying it to my storage card and then copying it back to Windows.
Doesn't work
Any other suggestions, please?

if you navigate to
HKLM\Security\Phone\Skin
Change the value of Enabled to 1
Soft Reset
do you get your logo now ....
I know changing the value to 0 should give the the default windows mobile screen

It was already set to 1 so I took a chance and changed it to 0.
Well...its still the same.
This is unbelievable. I also had a go with Total Commander and some of the instructions around this forum. Nothing.
I can't believe the developer of pRSSReader can screw up so bad...I am going to make sure I tell everyone I know to steer clear.
Thanks for your help, though...

try to create another welcomehead.96.png with properties 240x320 24bit (important) with your PC copy it over PPC windows folder. it should work.
i have done like this way and i change whatever i want but pRSS reader get things conplicated if u want your welcome screen do not use that program as well.

Should the image be 320x320 or 240x320? I know the resolution of the device is 240x320 but many people who have posted here on how to change the boot images say it should be 320x320.
I will do the above and let you know how it goes.

I can easily change my 2nd splash before pRSSreader and now and will after (uninstalled that RSS program)
I posted this thread becuse I wanted to learn if that program created the bug or not and if it's possible to overcome that problem without uninstalling. Asked the buddy who wrote pRSSreader and absolutely he was not aware of the issue. maybe will solve it eith the next release who knows ??
all my images are 240x320 24bit .png and they work perfect.
let me know how it goes as u told

Well, I edited the original 320x320 image to 240x320 and then copied it to my Windows folder. It still doesn't work! It's so strange
I can't imagine how its not working because it seems to be for everyone else.
I can confirm that the problem took place after I installed pRSSReader as I didn't install any other program before that for at least 3 days. It's a very nice program (and free, which makes it nicer) but not worth the trouble if it messes up my system.
Well, I guess I'll learn to live with it...till I decide to do a hard reset and install all my stuff again (which is just scary as I have a lot of stuff and it'll take up tons of time).

'Touch Settings' Program for Vogue (aka Sprint Touch)

First - thank you to Carlos for his hard work on the original version and now for taking the time to update it for those of us using Sprint's touch. I'm starting this as a separate thread since the new beta version will have many issues unrelated to the original versions.
And, unfortunately, I get to start off with my first issue which occurs upon execution of the program.
A few moments after starting the program I get the follow error message...
System.ArgumentException: An error message cannot be displayed because an optional resource assembly containing it cannot be found at Microsoft.AGL.Common.MISC.HandleAr() at System.Drawing.Bitmap._InitFromMemoryStream() at System.Drawing.Bitmap..ctor() at TouchSettings.Form1.load PBpictureFromPath()
Click to expand...
Click to collapse
And then the error message scrolls off the screen without scroll bar for me to see what else it says...
Upon clicking the "OK" button, the program continues to load to the App Launcher screen.
Upon load, the App Launcher screen is empty. The screenshot, icons, path and program title are not populated.
When I click on the empty box where the screenshot should be located I get the same as as before and the program exits.
I can populate the App name and path fields and can also ad an Icon -- but only for one program. When I save and reset however, the app name, path and icons are not retained.
When returning to the program after the first entry, I continue to receive the same error and the App Launcher screen is again blank.
In Media Hub:
First - the screenshot displayed is from the other version of the Touch screens...with the bluegreen icons -- not yellow. I assume you know that, but just wanted to mention it.
The "Sprint Music" fields default to the ATC Audio Manager which, to my understanding, does not come on the Touch. I've already installed AudioManager so the link worked fine -- but I'd suggest defaulting it to Sprint's Java-based Music ap just like the stock set up (less confusion for noobs)
Sprint TV seems to work as expected.
On Demand also worked as expected.
I changed the settings for On Demand to point to \windows\HTCAlbum.exe, however, and upon re-boot I received the following error when trying to run it from the cube:
The file " cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Click to expand...
Click to collapse
(and that single quotation mark after the words "The file" is exactly what displays)
Weather appears to display properly. I haven't had a chance to test the auto update feature yet.
On the bright side - the About screen works perfectly. It's just as easy to send Carlos a beer as it was before!
Given that we'll soon have a Vogue forum started I also assume you'll probably want to update the Support Thread to include a link for "Sprint Support"??
Whew. That's all for the first 10 minutes.
THANK YOU CARLOS! Your hard work is appreciated!

My experience is exactly the same on the sprint touch.
Joe

I just wanted to drop in and say thanks for all your work Carlos!

Same problems still having problems with the app loader portion of the settings. The other settings work as they should.

ok well i made custom PNG's for Slingplayer mobile and opera, if anyone needs custom images let me know im makin em. BUt i need the sprint program to implement the images!

the original "Touch Settings" program that you're referring to will work with the Sprint Touch without any problems. You just have to know what you're doing....
Step 1: Download TaskMgr and copy to your phone. Place TaskMgr in the \windows\start menu\programs\ folder of your device.
Step 2: Run the TaskMgr program you just put on your device. Upon opening TaskMgr, a list of running processes will be displayed. You want to terminate the following processes; biotouch.exe, quickdial.exe, mediahubmini.exe and aplauncher.exe. To do this, select each one individually and then tap the "Close" button on the bottom of the screen.
Step 3: Download and install the TouchFlo Alpha cab below.
- 3a: upon successful completion of the installation you will be prompted to "Reset" your device. Click "NO".
4. navigate to the \windows\startup folder and delete any new links that were created.
5. navigate to the \windows\start menu\programs folder and delete "touchflo"
6. Download and install the Touch Settings Cab below. Again, at the completion of the installation it will prompt you to restart your device. SELECT NO!. You are not ready to reset your device just yet.
7. Now that you've killed the 4 processes, installed the touchflo alpha cab and the touch settings cab, we're almost done. Navigate to the \windows\startup folder and delete the mediahubmini link.
8. Soft Reset Device.
9. Launch "Touch Settings" program from the Start Menu.
10. BEFORE MAKING ANY CHANGES TO THE CUBE CLICK "SAVE". WAIT APPROXIMATELY 1 MINUTE AND THEN SOFT RESET AGAIN.
11. Run Touch Settings again and start customizing.
Hope this helps.
Later

utexascg said:
the original "Touch Settings" program that you're referring to will work with the Sprint Touch without any problems. You just have to know what you're doing....
Step 3: Download and install the TouchFlo Alpha cab below.
- 3a: upon successful completion of the installation you will be prompted to "Reset" your device. Click "NO".
...
6. Download and install the Touch Settings Cab below. Again, at the completion of the installation it will prompt you to restart your device. SELECT NO!. You are not ready to reset your device just yet.
...
Click to expand...
Click to collapse
Not sure what and where to get these cabs... can you provide links? (especially first one)
TouchFlo Alpha cab? Touch Settings Cab (is ths 1.22 or 1.29?)

Haggar said:
I'm starting this as a separate thread since the new beta version will have many issues unrelated to the original versions.
Click to expand...
Click to collapse
Hi guys and thx Haggar and others for bug reports - I think I may have some theories as to what's going wrong.
I made a new test build for you to try out - the CAB is attached below. (REMOVED, SEE LATER POST FOR UPDATED VERSION) Please install and let me know how you get on. It should create a log file called log.txt in the app directory which you can attach to your post in case of any problems:
QUESTIONS:
1. Does it now work?
2. If not, what happens?
3. If not, please attach the log file.
4. When you go to the "About" screen, it says "Detected Device:" at the top - what is the detected device?
@utexas - I'm not sure what your instructions are referring to, but please ignore these peeps, as it would be best for us to try to get the app working properly with the Sprint without resorting to loading older versions of the TOuchFLO software onto your devices.
Finally, does anybody have a Sprint that they HAVENT yet installed Touch Settings onto? If so, please could somebody zip up a copy of \Windows\MediaHubMini.exe for me from your Sprint device and send it to me? This should be BEFORE installing any Touch Settings software, as this patches over the executable, and I'd like a copy of the NEW MediaHubMini.exe that comes with your device, so I can see if I need to release a new patch. If anyone has recently hard reset their device, then the file will be on your device unaltered.
Thanks for the nice comments peeps.
Carlos

Here you go Carlos. I have never installed Touch Settings on my Sprint Touch.
What exactly is Touch Settings? Could someone tell me, or point me to the original thread? Thanks.

Thanks Carlos... I've attached the log.txt file... still generating errors... looking for bitmaps (brns) that it cannot load... example... looking for \windows\AL_03.brn... this file is indeed located in the indicated location so not sure what the problem is...I tried to make and save a change to the launcher and now I get no images in the 3x2 launcher.

abeery said:
Thanks Carlos... I've attached the log.txt file... still generating errors... looking for bitmaps (brns) that it cannot load... example... looking for \windows\AL_03.brn... this file is indeed located in the indicated location so not sure what the problem is...I tried to make and save a change to the launcher and now I get no images in the 3x2 launcher.
Click to expand...
Click to collapse
Other than the time of day, his log file looks identical to mine...so I won't bother uploading...

abeery said:
Thanks Carlos... I've attached the log.txt file... still generating errors... looking for bitmaps (brns) that it cannot load... example... looking for \windows\AL_03.brn... this file is indeed located in the indicated location so not sure what the problem is...I tried to make and save a change to the launcher and now I get no images in the 3x2 launcher.
Click to expand...
Click to collapse
same here. but what i figured out about "no images in the launcher" is the path are all set to "\\" instead of just one "\". so i use memmaid to fix it in the registry and the cube is fine again.

OK everyone
Thanks for all the log files etc. It's now very clear what the issue is - simply that the newer version of the touch uses BRN files instead of PNG files for its icons! BRN is a proprietary format, basically a BMP with header information removed and some other changes; there's information elsewhere on this site about it.
So... ...to get Touch Settings working on the Sprint, I'll have to build BRN support into the program, which is going to involve:
1. Studying the file format and finding out more info. ([HREF="http://forum.xda-developers.com/showthread.php?t=325424"]this thread[/HREF] is a good starting point)
2. OR approaching the author of the BMP2BRN program to ask if he'd allow me to use his source code inside Touch Settings.
....if anyone can help with either of these, please do! Touch Settings is written in vb.net CF.
Until then, might I suggest you go about trying to use .PNG files instead for the time being, and report back to the forum to let us know if they work instead of BRN files! I will release a new build of Touch Settings asap which side-steps the error messages and displays blank icons for the time being, just so as you can use the program.. ..it will work fine, it just won't display the icons for you!
Carlos
mark1581 said:
Here you go Carlos. I have never installed Touch Settings on my Sprint Touch. What exactly is Touch Settings? Could someone tell me, or point me to the original thread? Thanks.
Click to expand...
Click to collapse
Mark, thanks ever so much for this - will be very helpful! Original thread about Touch Settings - and what it is - here: http://forum.xda-developers.com/showthread.php?t=324556

log file...
My log file also had the same info. Thanks for all your hard work Carlos. A friend of mine also has a touch that does not have any settings program installed. Let me know if you need any other files.

lol i had a post earlier about PNG and BRN files. Basically i want to be able to just chang the icons text and path. I dont care about the BG color, how how the cube rotates. I made my own CUstom PNG's for the 3X2 launcher, and i made a custom one for the media hub. I made them all the same size on accident, but for the sprint touch do i need to convert the PNG's to BRN files then where do i save them in my phones directory?
anyone have the dimensions for the 3X2 and the media hub. I made them all
119 by 105. ?? Is there an easy way to change the size to the size for the media hub because i believe that is the size for the 3X2. Any help is appreciated!

carlosp_uk said:
OK everyone
Thanks for all the log files etc. It's now very clear what the issue is - simply that the newer version of the touch uses BRN files instead of PNG files for its icons! BRN is a proprietary format, basically a BMP with header information removed and some other changes; there's information elsewhere on this site about it.
Click to expand...
Click to collapse
Carlos,
I see from reading another thread you've already got the source code for "BrnConvert"... does this meet your needs or do you need anything else?
Let us know what we can do to aid your efforts... 1.29c was close but I had to clean up my registry to remove all the double slashes in the image and program paths and obviously the brn issue you noted...
Again thanks for you great work on this...
Everyone else... don't forget to buy this man a beer at his Fatattitute.com web site

is there any new news on a possible fix?

Is version 1.29c worth installing at this point? Any recommendations??

Hello everyone - I think I may be nearly there!
I've certainly got BRN support working on my original touch, anyway, so let's see if this new build works for you.
CAB file attached below, usual installation instructions apply. (see this thread: http://forum.xda-developers.com/showthread.php?t=324556)
Please let me know if the icons are displaying correctly, and any other feedback re: usage. Should be the correct colour mediahub logo too!
Carlos
PS: Sprint owners, for completeness, you may want to copy the newer mediahubmini.exe into your \Windows\ directory (attached) as my prog overwrites it with a slightly older version. My tests have shown this shouldn't be a problem, but it's up to you. Note to older Touch users: do NOT use this newer version of mediahubmini.exe you will run into problems with your touch screen.

so we install the cab then just replace the EXE file after.
also carlos, if i want to make my own icons
1. can they be the same size for the media hub and 3X2
2. Do they need to be BRN style, i made them PNG (but i can convert to BMP then to BRN.)
3. Where do i save them on my phone.
4. i have the sprint touch!
thanks carlos

"De-Branding" HP 910c...

Hello folks,
I'm rather new to all of this, but I've come across a problem I can't seem to work out on my own.
I purchased a second-hand HP 910c, which had WM 6.1 but in French. It is also "branded" with Rogers software as well. I followed the instructions here to "flash" a ROM on the device which worked fine... but as soon as I boot up the device, it says that there are updates available for my device, and doesn't let me do anything else until I install them. Turns out the "updates" are in fact Roger's software installing on my device, and also UNINSTALLING other useful programs!
What I hope you can help me out with is - how do I disable that automatic update? I think it's called "IPAQ CUSTOMIZATION" or something like that?

Sounds like you've got some Canuck in your extended ROM! See if this works for you: hard reset, and as soon as you see the "updates available" screen come up, soft-reset. (It won't hurt your device, promise.) If I've guessed right, your device will restart but none of the Rogers software will be installed.

I tried that - it still comes up with "HP IPAQ CUSTOMIZATION" upon reboot.
Almost as if there's a file in a "Start-Up" type folder... but I can't go anywhere past that install screen to see...
Any ideas?

i think the only way to disable ipaq customization is to edit the rom initflashfiles.dat under OEM_Lang to take it out from start

keyx said:
i think the only way to disable ipaq customization is to edit the rom initflashfiles.dat under OEM_Lang to take it out from start
Click to expand...
Click to collapse
Is there a tutorial around for that, or to get me started?
Also - I'm loading a ROM from here to change the language... does that matter?

gfinockio .. have you had any luck with this?

Yeah, sort of a fluke really. I updated to one of the 6.5 ROMs, didn't like it, so I went back to a 6.1 ROM from HP. That seemed to do it!
I think the key is to do a "full" flash of the ROM. You can't use the SDLoader method, because that just flashes the OS. Using the official update from HP, with the software, should work. There is a package somewhere on these forums that is a "hacked" version that ignores language as well. Take a search (I'd use "minutes" as a key, because that's in the thread!) and keep us updated.

What happens is the clean boot image has a link to the HP customisation program in the windows\startup folder. The way to avoid this program from running is hence to remove this link from the startup folder.
My way of doing this is to connect the iPaq to my PC before starting the iPaq. When the iPaq starts, the screen asking you to click to start the customisation will come up, but until you click, the program will not run yet. In the background, while you can't see it (the customisation screen won't give way to anything else), other programs including Activesync will still run. You can therefore, from the PC, explore into the startup folder and delete the link to the customisation program, all without clicking on the iPaq and hence before the customisation has a chance to run. You can then soft reset, and with the link removed from startup, customisation will not start.

chan200606 said:
What happens is the clean boot image has a link to the HP customisation program in the windows\startup folder. The way to avoid this program from running is hence to remove this link from the startup folder.
My way of doing this is to connect the iPaq to my PC before starting the iPaq. When the iPaq starts, the screen asking you to click to start the customisation will come up, but until you click, the program will not run yet. In the background, while you can't see it (the customisation screen won't give way to anything else), other programs including Activesync will still run. You can therefore, from the PC, explore into the startup folder and delete the link to the customisation program, all without clicking on the iPaq and hence before the customisation has a chance to run. You can then soft reset, and with the link removed from startup, customisation will not start.
Click to expand...
Click to collapse
Yeah, I tried that too... but if you flash again (without doing a FULL flash), it might come back on next reset, or for sure on next flash.
The good news is - it IS possible to get rid of it.

What did you change/mod when you first got your diamond?

Hi Everybody!
I should receive my 2nd hand HTC Diamond Touch today.
With all the mods, hacks and apps on this here forum, I was wondering what was the first thing you changed on your handset?
For me I will be unlocking the device and hoopefully the ROM.
Any suggestions as to what to mod/hack next?
{?

The ROM because the retail ROM sucks!

My New (to me) Diamond
Changed the ROM to shaks 4.30 topaz, installed touch HD weather app, Background4all, Transparent slider and Glass Clock V2. Oh yeah, and the changescreen rotation application for landscape mode.
Look around and experiment with what you like and works best for you. The forum's a wealth of information if you take the time to search!

tried all the newer roms out there, and so far, the quickest bug free ROM ive used is duttys v4....its quick, with loads of memory left...(see ROM link in my sig to go straight to the ROM)
then, i normally change the clock, the top curtain, and then the slider.

I'm currently on
BsB 6.5F Black (http://forum.xda-developers.com/showthread.php?t=506533)
I love it,
Windows Mobile 6.5 is awesome.
It's super finger friendly!

Freckle said:
I'm currently on
BsB 6.5F Black (http://forum.xda-developers.com/showthread.php?t=506533)
I love it,
Windows Mobile 6.5 is awesome.
It's super finger friendly!
Click to expand...
Click to collapse
yeah, been lookin at the 6.5 ROM`s, but im still a bit unsure whether to switch yet...just how stable are they??

gizmolisa2006 said:
yeah, been lookin at the 6.5 ROM`s, but im still a bit unsure whether to switch yet...just how stable are they??
Click to expand...
Click to collapse
Very stable, I haven't had a problem yet. I've been heavily using it since yesterday and I haven't been able to find a bug or anything that bothers me yet.
You should try it, you will be amazed of how finger friendly it is!
Don't even get me started on how smooth it goes with scrolling!

Thanks for your replies so far!
I didn't get much time to play with my phone today. However, I have managed to de-brand and do a sim unlock. So for now, my spec reads:
ROM VERSION 1.37.405.1 WWE
RADIO VERSION 1.20 oliNex
PROTOCOL VERSION 52.26A.25.09H
I have tried to install a few apps, but failed. The "set up" files are all .XML and seem to open up in my browser????
{>

I think you didn't notice the .xml files are actually within the setup file.
The setups are .CAB files, you simply move them onto the internal storage and execute them within your mobile phone.
Have fun!

Hi,
Thanks for your reply.
Not sure what I am doing here?
I transfered the programs to the internal storage (my docs). However, there is no .cab file.
When I click on the program file, it either shows me a blank screen with the program name at the top or other folders e.g. open sensors or open GLES.
The programs I am trying to install are:
air horn
Diamond beer
htorch
WiFi monster
Many Thanks
{>

scutter said:
Hi,
Thanks for your reply.
Not sure what I am doing here?
I transfered the programs to the internal storage (my docs). However, there is no .cab file.
When I click on the program file, it either shows me a blank screen with the program name at the top or other folders e.g. open sensors or open GLES.
The programs I am trying to install are:
air horn
Diamond beer
htorch
WiFi monster
Many Thanks
{>
Click to expand...
Click to collapse
When you download a program for example Diamond Beer (http://www.freewarepocketpc.net/ppc-download-diamond-beer.html)
You will download a file called DiamondBeer2Installer-v0_1.cab
That is a CAB file. When you see that you copy it to the internal storage and run it from your mobile phone.
But sometimes (usually when it's made by real developers) you get a executable. Those are either to be run from your pc and with ur mobile phone hooked up using activesync. Or if it gives you an error when trying to execute it from your pc then most likely it's telling you that you aren't running windows mobile (means you're not running it from your mobile phone while you're supposed to), then it's the program itself (the actual and final .exe) and you will have to make a directory on your internal storage yourself and copy the .exe in there (No automated installation involved).
Sorry for the long and maybe senseless story but it's late here and I'm in a hurry.
Enjoy

Hello again and thanks for your patience!
I have downloaded said file. I used winzip to extract, then cut and paste the folder in my "internal storage" on my device.
Inside there are three folders:
_setup (which is the .xml file I was talking about earlier)
Diamon~1.000
Diamon~10001
When I click on the setup file, me device just goes to IE:
file:/internal%20storage/DiamonBeer2Installer-v_1/_setup.xml
???
{>

scutter said:
Hello again and thanks for your patience!
I have downloaded said file. I used winzip to extract, then cut and paste the folder in my "internal storage" on my device.
Inside there are three folders:
_setup (which is the .xml file I was talking about earlier)
Diamon~1.000
Diamon~10001
When I click on the setup file, me device just goes to IE:
file:/internal%20storage/DiamonBeer2Installer-v_1/_setup.xml
???
{>
Click to expand...
Click to collapse
don't extract the file but cut and past on your phone
go to the file on your phone and you wil see that its a cab click on it to install.

OH I SEE SAID THE BLIND MAN TO THE DEAF DOG!
Many, Many Thanks
{>>>>>>>>>>>>>>