Database Users

ROMkitchen are out of date..... Who wants to change????

Hello XDA users....
I think you know it all, that the ROMkitchen is a fine application to get our device nearly perfect.
But the ROMkitchen is out of date. This means many applications aren´t not in the actual version. Therefore Auburnham and I thought to update the applications.
The problem is, that the amount of added applications to the kitchen is to big to make this happen by us two. Because of this problem I´m searching for some people, which wants to help.
Another problem is, that you need for this a device that haven´t got installed that piece of software. This means that when you want to help me with Phonext for example, you must have a device without any version of Phonext installed.
So, if you are going to help me make a snapshot of your device with the ssnap - Application.
Install the software.
Make again an Snapshot of your device with the ssnap - Application.
Send these two files to [email protected] with inforamtion about the program you have installed and the exact Version you have installed.
When I´ve got analyzed the two files i will reply to you with a wishlist of files that have been created on your device. After sending me the files, i can update the kitchen....
IF there are any quesions or anything else, feel free to contact me....
Regards
Stefan

Good Idea :

I'd be happy to contribute.
Tell me which application you want me to install and I'll do it provided that I find the procedure (that I've seen being posted elsewere in this forum).
NB : I'm using XDA I with a Frenchy 3.16 and be stuck with it :evil: ; so there is no chance for me to re-build a new a geniun 3.16 Rom again.

My XDA is all up and running.
I've overcome my Language FRA error message after purchasing a SD card reader and loading the ROM through the bootloader. 8)
Now, I'm about to install ttn 3 on my XDA. Do you want list it in your kitchen ?
What do you need exactly ?

I would be happpy to help. I am a regular user of your site and appreciate the effort that has been put into it.
I understand the effort needed to keep things working and up to date.
Pierre

I'm in!!
Just let me know what you need and when and I will maker every endevour to help.
Thanks for all you do
macudc

Check out
http://lumpistefan.dyndns.org/update.html
Select and download the programs you want to take and send an email to me, that i can remove the files.
Follow the instructions.
If there are any questions ----> Email me....
Thx for Helping.
Stefan

Tanguy said:
Now, I'm about to install ttn 3 on my XDA. Do you want list it in your kitchen ?
Click to expand...
Click to collapse
Tomtom wouldn´t fit in the free space. Already didn´t work for TomTom 2.
Maybe i can include the Gps part....
Stefan

LumpiStefan,
OK on the priniple for GPS. How to best handeled tha case of a sotfware GPS 3.0 on (CD's) that has an upgrade GPS 3.03 to be dowloaded from the web site.
Does the snapshot comes at the end of the 2nd install ?
Tanguy

Howdy all,
I just noticed we had a thread started on this project. I've been working on updates over the weekend and noticed there have already been quite a few. So here are my contributions, including updates and additions:
Upgrades:
Converter CE 1.8c
StorageTools 1.9
PocketNav 2.73 (no snapshot necessary, executable only)
EzWAP 2.5
Polyphonic Ringtone Support (no snapshot necessary, additional files for \Windows directory only)
New Addtions:
Resco File Explorer 2003 * http://www.resco-net.com/explorer.asp
Resco Picture Viewer 4.11 * http://www.resco-net.com/picview.asp
Pocket Player 2.5 * http://www.conduits.com/ce/player/default.asp
Pocket Music 3.0 * http://www.pocketmind.com/pocketmusic.htm
Microsoft Money 2003 http://www.microsoft.com/windowsmobile/downloads/money.mspx
Olive Tree BibleReader 2.31e051 http://www.olivetree.com/handheld/WinCE/WinCEBible.html
AOL Instant Messanger 2.0 http://www.aim.com/get_aim/win_ce/latest_wince.adp
WESTTEK ClearVue Suite * http://www.westtek.com/pocketpc/suite/
QuickTasks 2.8 * http://www.scarybearsoftware.com/ppc_qt_overview.html
InkSpot Newsgroup reader * http://www.dejavusoftware.com/inkce/index.html
Macromedia Flash player 6 http://www.macromedia.com/software/flashplayer/pocketpc/2002.html
Animated Today 2002 (not necessary, requires flash player) * http://www.gigabytesol.com/anitoday.htm
* Trial version, must be registered
I've sent these snapshots off to Stefan, along with the files that I thought might be necessary for these programs. This is going to be great for all of us, but a lot of work for Stefan. We all owe him a great deal, so take him out for a nice meal the next time you see him.
Shawn

LumpiStefan said:
Tomtom wouldn´t fit in the free space. Already didn´t work for TomTom 2.
Maybe i can include the Gps part....
Stefan
Click to expand...
Click to collapse
I don't want to make this any more complicated than it is, but for some programs, it just doesn't make any sense to install to the XDA memory. Most of the media players and "Misc" programs just take up too much unnecessary device memory when they would work just as well on the SD Card (if that's available).
The problem is that those huge programs require just a few small files to be placed on the device itself. So after installing a few of these types of programs, you've used up a lot of device memory from these small files, even though you installed the program to your SD Card.
Is there a way to alter the kitchen a bit to allow cooking of the necessary device files only, and allow the user to later install the program to the SD Card (being careful not to overwrite the files in ROM with files in RAM)?
For instance, with the TomTom program, if you start with a clean ROM and SD card, take a snapshot, then install the program to your SD card, then take another snapshot, you could determine what files need to be on the device, and what files don't need to be on the device, and allow users to either cook the entire program or just the necessary files in the ROM. (Note: This is a good example of a run-on sentence). Would this be a difficult feature to add to the kitchen?
Shawn

auburnham said:
For instance, with the TomTom program, if you start with a clean ROM and SD card, take a snapshot, then install the program to your SD card, then take another snapshot, you could determine what files need to be on the device, and what files don't need to be on the device, and allow users to either cook the entire program or just the necessary files in the ROM. (Note: This is a good example of a run-on sentence). Would this be a difficult feature to add to the kitchen?
Click to expand...
Click to collapse
Maybe the esiest Option is adding a new Select Point for the kitchen like "misc", "System Tools", "Phone" ....
This means having the programs double in the kitchen, but how cares.
I don't know exactly, but when you install a program to the SD-Card, could you select the part where to place it?
If yes, this could be a big problem. Many of the programs store the path in the registry.
If no, i could also provide a ZIP-file, where the rest of the programfiles are in, hust to unzip to the Storagecard.....
auburnham said:
We all owe him a great deal, so take him out for a nice meal the next time you see him.
Click to expand...
Click to collapse
Sounds good. I'm hungry all the time.... ;-)
Stefan

LumpiStefan said:
I don't know exactly, but when you install a program to the SD-Card, could you select the part where to place it?
If yes, this could be a big problem. Many of the programs store the path in the registry.
If no, i could also provide a ZIP-file, where the rest of the programfiles are in, hust to unzip to the Storagecard.....
Click to expand...
Click to collapse
I believe this really depends on (1) how well the program was written, and (2) if you can install the program with CabInst (i.e. has a cab installation).
For example, I try to keep my SD Card organized and tidy so if I use CabInst I install the program to an appropriate folder on the SD Card. If I have to install the program from the desktop, I install the program to the SD Card root, then try to move the program to an appropriate folder and update the shortcut. Most of the time this works without even changing any registry entries, but sometimes it doesn't. Two examples from the above list of applications are AOL Instant Messenger 2.0 and Pocketmind PocketMusic 3.0. To function correctly, they both need to be in their original installation folders on the SD Card.
But perhaps the best solution would be to have an associated .zip file to go on the SD Card, as you suggested.
Shawn

Now the kitchen should be up 2 date again.
Only missing is PocketConsole and the Part "Software that needs to register"
So happy cooking and again Thx a lot to all users that helped me.....
Stefan

A Windows-way for cooking a ROM would be great for two reasons: 1) Don't hassle your server with lots of traffic and 2) Practical. Advanced users could cook a ROM without having a PC with Unix.
For example I tried cooking the Spanish version of the ROM and not all the programs I chose were installed and the worst thing is that the boot logo was just garbage, it was showing program code on the screen as a logo
Regards,
Marton

Marton said:
For example I tried cooking the Spanish version of the ROM and not all the programs I chose were installed and the worst thing is that the boot logo was just garbage, it was showing program code on the screen as a logo
Click to expand...
Click to collapse
Ok. Fixed the problem with the bootscreen.....
Tried also adding as much application, and all have been installed.
Can you tell me, what files / programs are missing?
No one else told me that there have been a problem wirth this ROM. I think it's because of the situation that most of the useres are using WM2003 ROMS....
You can also use the kitchen under "Windows" just have to set up a Cyguin environment on your system....
Also i didn't know how many Kitchen's are implemented by other users, but mine one is the only "official". You can't believe that everyone would be able to set it up.......
Stefan

Thanks Stefan!!!!!!
Now it seems to work but if EzWAP is selected, it throws a Log error when trying to cook...
Cheers,
Marton
P.S.: Do you know if a Spanish WM2003 exists?
Edit: This is the error:
Cannot fit files in given sections
Error splitting files

Just cooked a ROM... I selected the "Windows Mobile XDA" Boot Screen and now it is not garbage anymore but now it shows mirrored and upside down...
Any ideas?

Marton said:
Just cooked a ROM... I selected the "Windows Mobile XDA" Boot Screen and now it is not garbage anymore but now it shows mirrored and upside down...
Any ideas?
Click to expand...
Click to collapse
Hello Marton.
I relaised that this is a problem with the Image.
This Image have been sent to me, and i ithink it's created wih the wrong parameters....
Stefan

Your Favorite Tools and Toys

I recently had the need to re-Rom a couple of Wallabies and loaded the A.30.09_ENG to do it. All went great and both T-Mobile units will now run like the wind on either T-Mobile or Cingular networks and from trial and error, I learned that they could both run the Kewlest Caller ID program that I have ever seen.
I was directed to pull it out of the Magician folders at ftp://xda:[email protected] and I did, in hopes of using it on my personal Hermes, but to no avail. It did however work great on my wife's Blue Angel, so I tried it on the Wallabies. Excellent Product!!!! Everyone with a Wallaby should be using it. It allows the owner to assign a different ringtone to each contact AND . . . here is the cool part . . . it allows you to use a different picture for each contact AND . . . AND . . . AND that image can be an animated .gif file. It is so much cooler than Photo Contacts in their current form. Check it out and enjoy.
And everyone else, sign in and ad your favorite tweak and toy or tool for the Wallaby and see if it isn't a bit happier in the pocket.

ok, sorry to be a bit of a n00b, but how do i put this on my wallaby? can i do it with a sd card or does it have to be via cable? and i cant see any installer type files, is that right??
thanks

cab files can be be installed from sd cards yes

ok another n00b question (apologies, i am very new to PDA's) but , how do i do it? is ther a folder i have to copy the files to, as ive tried to install another file and all it says is " there is no association with this file"
thanks again

Then you haven´t installed a program on your device to install Cab-Files.
Use this program for it:
http://s-k-tools.com/freeware/cabinstl.zip
Stefan

ok, have got myself a cable (makes life easier IMO) and installed the cab file thingie, have installed the above caller id ting ( apologies im not very technical!) but when i try to run it, theres a blank icon and it comes up with "cannot find photocontacts or one of its components make sure the path and filename are correct and all the required librabries are available" have i done somethig wrong??

Version conflict?
doozerbob said:
ok, have got myself a cable (makes life easier IMO) and installed the cab file thingie, have installed the above caller id ting ( apologies im not very technical!) but when i try to run it, theres a blank icon and it comes up with "cannot find photocontacts or one of its components make sure the path and filename are correct and all the required librabries are available" have i done somethig wrong??
Click to expand...
Click to collapse
It may be that you are running a version of windows that won't run it - or it needs to be re-installed (happens sometimes) because part of the program was installed on a (physically) defective portion of the memory. Wallaby's are getting old enough now to have rust on their internal components.

ok, i thought it might have been the OS as well, so i went and upgraded to WM2003, and fingerrs crossed, it seems to be working ( just need someone to ring now lol)
*edit* have set it all up with photos and ringtones etc, using wma from my card and from the phone itself, and it still plays the default ringtone and doesnt show pics when someone rings...am i doing summat wrong?

Thanks for all your post, I have the same problem and now it has been sorted!

It does not installing in my device. I have a smartphone...

'Touch Settings' Program for Vogue (aka Sprint Touch)

First - thank you to Carlos for his hard work on the original version and now for taking the time to update it for those of us using Sprint's touch. I'm starting this as a separate thread since the new beta version will have many issues unrelated to the original versions.
And, unfortunately, I get to start off with my first issue which occurs upon execution of the program.
A few moments after starting the program I get the follow error message...
System.ArgumentException: An error message cannot be displayed because an optional resource assembly containing it cannot be found at Microsoft.AGL.Common.MISC.HandleAr() at System.Drawing.Bitmap._InitFromMemoryStream() at System.Drawing.Bitmap..ctor() at TouchSettings.Form1.load PBpictureFromPath()
Click to expand...
Click to collapse
And then the error message scrolls off the screen without scroll bar for me to see what else it says...
Upon clicking the "OK" button, the program continues to load to the App Launcher screen.
Upon load, the App Launcher screen is empty. The screenshot, icons, path and program title are not populated.
When I click on the empty box where the screenshot should be located I get the same as as before and the program exits.
I can populate the App name and path fields and can also ad an Icon -- but only for one program. When I save and reset however, the app name, path and icons are not retained.
When returning to the program after the first entry, I continue to receive the same error and the App Launcher screen is again blank.
In Media Hub:
First - the screenshot displayed is from the other version of the Touch screens...with the bluegreen icons -- not yellow. I assume you know that, but just wanted to mention it.
The "Sprint Music" fields default to the ATC Audio Manager which, to my understanding, does not come on the Touch. I've already installed AudioManager so the link worked fine -- but I'd suggest defaulting it to Sprint's Java-based Music ap just like the stock set up (less confusion for noobs)
Sprint TV seems to work as expected.
On Demand also worked as expected.
I changed the settings for On Demand to point to \windows\HTCAlbum.exe, however, and upon re-boot I received the following error when trying to run it from the cube:
The file " cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Click to expand...
Click to collapse
(and that single quotation mark after the words "The file" is exactly what displays)
Weather appears to display properly. I haven't had a chance to test the auto update feature yet.
On the bright side - the About screen works perfectly. It's just as easy to send Carlos a beer as it was before!
Given that we'll soon have a Vogue forum started I also assume you'll probably want to update the Support Thread to include a link for "Sprint Support"??
Whew. That's all for the first 10 minutes.
THANK YOU CARLOS! Your hard work is appreciated!

My experience is exactly the same on the sprint touch.
Joe

I just wanted to drop in and say thanks for all your work Carlos!

Same problems still having problems with the app loader portion of the settings. The other settings work as they should.

ok well i made custom PNG's for Slingplayer mobile and opera, if anyone needs custom images let me know im makin em. BUt i need the sprint program to implement the images!

the original "Touch Settings" program that you're referring to will work with the Sprint Touch without any problems. You just have to know what you're doing....
Step 1: Download TaskMgr and copy to your phone. Place TaskMgr in the \windows\start menu\programs\ folder of your device.
Step 2: Run the TaskMgr program you just put on your device. Upon opening TaskMgr, a list of running processes will be displayed. You want to terminate the following processes; biotouch.exe, quickdial.exe, mediahubmini.exe and aplauncher.exe. To do this, select each one individually and then tap the "Close" button on the bottom of the screen.
Step 3: Download and install the TouchFlo Alpha cab below.
- 3a: upon successful completion of the installation you will be prompted to "Reset" your device. Click "NO".
4. navigate to the \windows\startup folder and delete any new links that were created.
5. navigate to the \windows\start menu\programs folder and delete "touchflo"
6. Download and install the Touch Settings Cab below. Again, at the completion of the installation it will prompt you to restart your device. SELECT NO!. You are not ready to reset your device just yet.
7. Now that you've killed the 4 processes, installed the touchflo alpha cab and the touch settings cab, we're almost done. Navigate to the \windows\startup folder and delete the mediahubmini link.
8. Soft Reset Device.
9. Launch "Touch Settings" program from the Start Menu.
10. BEFORE MAKING ANY CHANGES TO THE CUBE CLICK "SAVE". WAIT APPROXIMATELY 1 MINUTE AND THEN SOFT RESET AGAIN.
11. Run Touch Settings again and start customizing.
Hope this helps.
Later

utexascg said:
the original "Touch Settings" program that you're referring to will work with the Sprint Touch without any problems. You just have to know what you're doing....
Step 3: Download and install the TouchFlo Alpha cab below.
- 3a: upon successful completion of the installation you will be prompted to "Reset" your device. Click "NO".
...
6. Download and install the Touch Settings Cab below. Again, at the completion of the installation it will prompt you to restart your device. SELECT NO!. You are not ready to reset your device just yet.
...
Click to expand...
Click to collapse
Not sure what and where to get these cabs... can you provide links? (especially first one)
TouchFlo Alpha cab? Touch Settings Cab (is ths 1.22 or 1.29?)

Haggar said:
I'm starting this as a separate thread since the new beta version will have many issues unrelated to the original versions.
Click to expand...
Click to collapse
Hi guys and thx Haggar and others for bug reports - I think I may have some theories as to what's going wrong.
I made a new test build for you to try out - the CAB is attached below. (REMOVED, SEE LATER POST FOR UPDATED VERSION) Please install and let me know how you get on. It should create a log file called log.txt in the app directory which you can attach to your post in case of any problems:
QUESTIONS:
1. Does it now work?
2. If not, what happens?
3. If not, please attach the log file.
4. When you go to the "About" screen, it says "Detected Device:" at the top - what is the detected device?
@utexas - I'm not sure what your instructions are referring to, but please ignore these peeps, as it would be best for us to try to get the app working properly with the Sprint without resorting to loading older versions of the TOuchFLO software onto your devices.
Finally, does anybody have a Sprint that they HAVENT yet installed Touch Settings onto? If so, please could somebody zip up a copy of \Windows\MediaHubMini.exe for me from your Sprint device and send it to me? This should be BEFORE installing any Touch Settings software, as this patches over the executable, and I'd like a copy of the NEW MediaHubMini.exe that comes with your device, so I can see if I need to release a new patch. If anyone has recently hard reset their device, then the file will be on your device unaltered.
Thanks for the nice comments peeps.
Carlos

Here you go Carlos. I have never installed Touch Settings on my Sprint Touch.
What exactly is Touch Settings? Could someone tell me, or point me to the original thread? Thanks.

Thanks Carlos... I've attached the log.txt file... still generating errors... looking for bitmaps (brns) that it cannot load... example... looking for \windows\AL_03.brn... this file is indeed located in the indicated location so not sure what the problem is...I tried to make and save a change to the launcher and now I get no images in the 3x2 launcher.

abeery said:
Thanks Carlos... I've attached the log.txt file... still generating errors... looking for bitmaps (brns) that it cannot load... example... looking for \windows\AL_03.brn... this file is indeed located in the indicated location so not sure what the problem is...I tried to make and save a change to the launcher and now I get no images in the 3x2 launcher.
Click to expand...
Click to collapse
Other than the time of day, his log file looks identical to mine...so I won't bother uploading...

abeery said:
Thanks Carlos... I've attached the log.txt file... still generating errors... looking for bitmaps (brns) that it cannot load... example... looking for \windows\AL_03.brn... this file is indeed located in the indicated location so not sure what the problem is...I tried to make and save a change to the launcher and now I get no images in the 3x2 launcher.
Click to expand...
Click to collapse
same here. but what i figured out about "no images in the launcher" is the path are all set to "\\" instead of just one "\". so i use memmaid to fix it in the registry and the cube is fine again.

OK everyone
Thanks for all the log files etc. It's now very clear what the issue is - simply that the newer version of the touch uses BRN files instead of PNG files for its icons! BRN is a proprietary format, basically a BMP with header information removed and some other changes; there's information elsewhere on this site about it.
So... ...to get Touch Settings working on the Sprint, I'll have to build BRN support into the program, which is going to involve:
1. Studying the file format and finding out more info. ([HREF="http://forum.xda-developers.com/showthread.php?t=325424"]this thread[/HREF] is a good starting point)
2. OR approaching the author of the BMP2BRN program to ask if he'd allow me to use his source code inside Touch Settings.
....if anyone can help with either of these, please do! Touch Settings is written in vb.net CF.
Until then, might I suggest you go about trying to use .PNG files instead for the time being, and report back to the forum to let us know if they work instead of BRN files! I will release a new build of Touch Settings asap which side-steps the error messages and displays blank icons for the time being, just so as you can use the program.. ..it will work fine, it just won't display the icons for you!
Carlos
mark1581 said:
Here you go Carlos. I have never installed Touch Settings on my Sprint Touch. What exactly is Touch Settings? Could someone tell me, or point me to the original thread? Thanks.
Click to expand...
Click to collapse
Mark, thanks ever so much for this - will be very helpful! Original thread about Touch Settings - and what it is - here: http://forum.xda-developers.com/showthread.php?t=324556

log file...
My log file also had the same info. Thanks for all your hard work Carlos. A friend of mine also has a touch that does not have any settings program installed. Let me know if you need any other files.

lol i had a post earlier about PNG and BRN files. Basically i want to be able to just chang the icons text and path. I dont care about the BG color, how how the cube rotates. I made my own CUstom PNG's for the 3X2 launcher, and i made a custom one for the media hub. I made them all the same size on accident, but for the sprint touch do i need to convert the PNG's to BRN files then where do i save them in my phones directory?
anyone have the dimensions for the 3X2 and the media hub. I made them all
119 by 105. ?? Is there an easy way to change the size to the size for the media hub because i believe that is the size for the 3X2. Any help is appreciated!

carlosp_uk said:
OK everyone
Thanks for all the log files etc. It's now very clear what the issue is - simply that the newer version of the touch uses BRN files instead of PNG files for its icons! BRN is a proprietary format, basically a BMP with header information removed and some other changes; there's information elsewhere on this site about it.
Click to expand...
Click to collapse
Carlos,
I see from reading another thread you've already got the source code for "BrnConvert"... does this meet your needs or do you need anything else?
Let us know what we can do to aid your efforts... 1.29c was close but I had to clean up my registry to remove all the double slashes in the image and program paths and obviously the brn issue you noted...
Again thanks for you great work on this...
Everyone else... don't forget to buy this man a beer at his Fatattitute.com web site

is there any new news on a possible fix?

Is version 1.29c worth installing at this point? Any recommendations??

Hello everyone - I think I may be nearly there!
I've certainly got BRN support working on my original touch, anyway, so let's see if this new build works for you.
CAB file attached below, usual installation instructions apply. (see this thread: http://forum.xda-developers.com/showthread.php?t=324556)
Please let me know if the icons are displaying correctly, and any other feedback re: usage. Should be the correct colour mediahub logo too!
Carlos
PS: Sprint owners, for completeness, you may want to copy the newer mediahubmini.exe into your \Windows\ directory (attached) as my prog overwrites it with a slightly older version. My tests have shown this shouldn't be a problem, but it's up to you. Note to older Touch users: do NOT use this newer version of mediahubmini.exe you will run into problems with your touch screen.

so we install the cab then just replace the EXE file after.
also carlos, if i want to make my own icons
1. can they be the same size for the media hub and 3X2
2. Do they need to be BRN style, i made them PNG (but i can convert to BMP then to BRN.)
3. Where do i save them on my phone.
4. i have the sprint touch!
thanks carlos

Newby

i know this is a newby question but how do you put these app or themes onto your HTC Diamond

you download the file on your computer, and sync your phone with your computer, than drag the file into your device internal storage

WhitesellJosh said:
i know this is a newby question but how do you put these app or themes onto your HTC Diamond
Click to expand...
Click to collapse
There are a couple of ways.
If the file is a .CAB file, it is the easiest the do.
Just download to your computer and sync to your phone like earlier explained and just install it on your phone (doubleclick or open)
if it is an .EXE file, it might be that you need to install it on you pc, while your phone is synched.
it will then automaticly install on your phone as well.
but most files here are cabs, so if you have internet on your phone, just download them immediatly to your internal storage and ryun them from there
easy as pie

ok so i downloaded it to my computer and then synced it to my phone but i how do i install it to make my screen appear that way. Thank you so much for all the help

Is it a cab file that you have downloaded? or another type of file?

i don't know its the Vista_Ultimate_Theme

i don't know if it will help but i just got my Diamond so I haven't figured everything out on it yet just wanted a new theme.

i just wanna change my theme cause the standard one is boring to me so please if anyone could help thank you so much.

WhitesellJosh said:
ok so i downloaded it to my computer and then synced it to my phone but i how do i install it to make my screen appear that way. Thank you so much for all the help
Click to expand...
Click to collapse
Hi WhiteselJosh
Best thing you can do is install the program Diamond TF3D Config 0.6.7 wich can be found here http://forum.xda-developers.com/showthread.php?t=405749
please read this first on the how to change a theme
http://forum.xda-developers.com/showthread.php?t=409901

Thank You So Much FuzzFuzz, ok so i've downloaded 0.6.7 onto my diamond and installed it but when i try to run it, it says i have an error somewhere. did i do something wrong?
Thank You So Much again

bump bump bump

What ROM are you using? You might have to update that for it to work.

How do I install updates and .cab files?

HI, I have just got the HD2 and have been on the HTC website and found a variety of updates for my phone. I follow these instructions:-
"This update for HTC HD2 allows for contacts stored on your SIM card to be properly displayed on your phone along with Phone and Exchange Server contacts.
Installation Instructions:
Note: This update is only for ROM versions less than or equal to 1.59.XXX.X.
Follow the instructions below to download and install the Update on your device:
Make sure you have Microsoft ActiveSync® installed on your Windows XP PC or Windows Mobile Device Center on your Windows Vista® PC. You can find Microsoft ActiveSync from this link or Windows Mobile Device Center from this link.
Connect and synchronize your device with your PC via Microsoft ActiveSync® or Windows Mobile Device Center using the USB cable.
To download the Update, first select the check box below. Next, select the Update and the desired FTP site then click Download.
To install the Update, tap the RUU.exe file on your PC and follow the on-screen instructions.
DOWNLOAD: To download this software, please follow the steps below:
1. Please select the file most suitable for your device:
--Please Select-- Update for HTC HD2 SIM Contacts
2. Please select a location closest to you:
--Please Select-- Europe 1 Europe 2 US Asia 1 Asia 2 "
I save the file to my PC, but when I try to run the file I get an error message saying that the .exe is not a valid Win32 application. Can anyone help? I'm using Windows 7 Home Premium 64bit.
Also, if I'm in the UK should I be selecting Europe 1 or Europe 2?
Finally, if I want to install .cab files to my phone where do I store the files and how do I open them?
Cheers

I can't say why the hotfix isn't working. You just run it from the PC and it works. Try downloading it again, in case it got corrupted during download.
As for cab files, I personally keep all my cab files so I can install them again after the next ROM update. I've got an "installers" folder on my storage card, with subfolders for different installer types (games, utils, htc fixes etc.) and I put them in there. You just run them directly on the phone by clicking them.
A word of advice - unless you REALLY want something installed on your phone, install it to the storage card. These babies run out of device space very quickly once you start installing stuff, and there's things out there that you don't have a choice about.
I only install things to the phone if the phone would function differently without it. eg. Theme modifications and essential utilities etc..
Hope you get the hotfix working. Most hotfixes run on the phone, so you won't normally have this issue. Oh yes, you should be selecting Europe for download location if you're in the UK. As far as I'm aware though, that's just the server location, so you pick the closest one. It won't affect what you download. That's determined by what region the site recognises you as.
Good luck

I've tried downloading it again but get the same error message. Should I be transfering the .exe file to the phone, and open it from the phone, or save it to the PC and open it on the PC? IF I should open it on the phone, where do I find the file once I've transfered it?

All the recent hotfixes, apart from the SIM contacts one, are local files that have to be run on the device.
Copy the file to the device then locate it using a file explorer. Simply press the file name with your finger to run it.

NeilM said:
All the recent hotfixes, apart from the SIM contacts one, are local files that have to be run on the device.
Copy the file to the device then locate it using a file explorer. Simply press the file name with your finger to run it.
Click to expand...
Click to collapse
The one he's asking about is the SIM contacts one, so it should be run on the PC.

Sorry- misread the OPs thread!

NeilM said:
Sorry- misread the OPs thread!
Click to expand...
Click to collapse
Well to be honest the SIMS was just one example, you have helped me with the others so many thanks

Once I've installed the hotfixes can I delete the .exe files from my phone?

You can, but they are relatively small so would you gain much?
Store them on the Storage Card (you can run then from there as well) so if you ever have to do a factory reset, you'll still have the update files to apply.

NeilM said:
You can, but they are relatively small so would you gain much?
Store them on the Storage Card (you can run then from there as well) so if you ever have to do a factory reset, you'll still have the update files to apply.
Click to expand...
Click to collapse
Good thinking

At the risk of seeming like a complete idiot, I wonder if I could pick your brains for some help.
I joined your forums when I bought my HTC HD2 a few weeks ago, (I had been a Nokia man for the last 20 years) and have spent the time perusing your excellent forums for information whilst learning the telephone out of the box, and now I have decided to expand my knowledge a little and start installing some simple .cab files.
I have tripped at the first hurdle!
I thought I'd start with something simple like the 'torch'
I created a folder on my computer specifically for downloaded cab files, and created the same on my HD2, downloaded the RAR file, unzipped it to my computer folder, then grabbed it and set it into the folder on the phone.
All good.
Now, when I use 'file explorer' to find the file, I can open it ok and when I click 'setup', the screen goes white with nothing but a small black box in the bottom right corner with what looks like a usb outline and an arrow above it.
If i click that, it looks like it's trying to take me to a website!
Now bejayus and begorrah, I'm not a stupid person, but I am an old dog trying to learn new tricks, so if anyone can help in laymans 'idiot proof' terms what I am doing wrong, it would be greatly appreciated.
Fantastic forum by the way, even though most of the information passes clean over the top of my head!

Well just so any other noob is/was in the same predicament as myself, the answer as expected was very simple.
DO NOT unzip the RAR file containing the .cab file on your computer when you download it and then send the unzipped folder to your phone.
Go to the location to where Firefox (or whoever) downloaded it on your computer, then copy and paste the intact RAR zip file direct to your phone and open it there.
I knew the answer would be simple, but thankfully the kind people in another forum pointed me in the right direction.
I know it's blatantly obvious to many members here, in fact, you probably laughed at such a stupid question in the first place...... but please keep in mind that not all of us are computer geeks.
I'm a hairy arsed construction worker myself, and merely trying to keep up with modern technology.
And I do love trying!