Database Users

XDAII Bluetooth MSN / PocketIRC

Hi All,
When I connect via BT with Activesync. When I set passtrough on activesync I should be able to surf using the PC's BroadBand connection I understand. My question is, will all other internet related traffic be send with the BT connection ? ie, will MSN Messenger and things like PocketIRC be able to connect via BT also ?
Thanks,
Rob.

as far as i know it should be possible just like you should be able to brows the LAN network the pc with activsync is connected to

ActiveSync connection via BT

Hi all, here it is my problem with Sync over BT. I am able to establish a partnership via BT, but when I try to surf the net by useing my PC ADSL connection, it stays few second connected, it start to downloads my web page, and than all of sudden, my BT Sync connection get interrupted. It seems that there must be some issue releted to internet connection and activesync via BT. Any Idea?
THX!

active sync

can u go on the internet using active sync connection if so how?

abz_y2k said:
can u go on the internet using active sync connection if so how?
Click to expand...
Click to collapse
just connect to AS 4 and use it (of couse your PC must have internet connection)

I'm using ActiveSync 4.1, WIFI to connect my PC to the internet and an USB port to synchronize my Pocket (SPV M3000 /Qtek 9100)
When my Pocket PC is connected to the PC, this "lock" the WIFI acces to the Internet. After synchronisation, it's necessary to reboot my computer to be ale to use the WIFI acces to internet.
Do you have an idea to correct this problem (this never happens before with ActiveSync 3.8) ?
Thanks in advance.

Thank God for that I'm having the same problem when i connect my wizard to my PC for active Sync my wifi in fact my internet connection locks up. When i look in network connections on my PC I have another Local Area Connection 3 ??????
But my web is locked ????
As soon as i disconect my wizard i loose the LAC3 but have to reboot my PC to get web acess again???
Anyone got any ideas???

I dont have wifi acces at home but when i connect to the pc which is connected to adsl, the wizard is also connected to the lan as i am able to surf the internet. It seems perhaps you have established another connection via your pc? my wifi is disconnected btw.

WiFi Active Sync 4.1 O2 XDA Mini s
I have the same problem. After a tip from someone on the MS Active sync forum who said it may be something to do with security I have worked out the following.
1) All computers loose all netork connections if they are connected to the router wirelessly and I try to Activesync.
2) If the Activesunc computer is connected to the router via CAT5 and I Active Sync then all is ok.
3) If I disable wireless security both WEP and WPA I can Activesync with my laptop connected wirelessly via to the router without loosing my network connections.
4) Something strange is happening still: When the PDA is connected to Activesync both computers keep popping up the UPNP icon telling me new network device found, even though its been connected for some time.
5) I have tested with WPA security, I will test with WEP next to see if it still has the same problem.

All computers loose all netork connections if they are connected to the router wirelessly and I try to ActiveSync.
Click to expand...
Click to collapse
I hit this issue with my home LAN when syncing via cable - all wireless clients dropped their connections and I got an earful from the lodger :roll:
I found that this doesn't occur when syncing via Bluetooth.

Mmm, thanks for the info - I spent hours trying to get this running yesterday and hitting the same problems - I actually cocked up my entire network and had to reboot everything! Will try bluetooth later...
Martin

GPRS While Connected to ActiveSync

So, I noticed that my GPRS gets disabled anytime I connect my Cingular 8125 to my computer via ActiveSync. This is annoying since I not only synchronize with my computer, but I also have an account with 4SmartPhone that utilizes the GPRS connection.
Is there a way to have the GRPS radio stay connected so that both will synchronize?

Using BT to check hotmail

Hi all,
I set up my Trinity to also check my hotmail account. Ofcourse, when I do this outside the confines of my home Wifi network, the P3600 automatically connects to hotmail via my UMTS connection.
When I'm on the road I don't mind this, but when I'm at the office, where there is no wifi, I would like to use the connection my PC has to the internet. I was thinking about using BT for this but don't know if this is possible at all...
Anyone with suggestions?
I don't think this is possible via Activesync, but if possible I would like to avoid the use of it anyway...
Thx for any suggestions!

if connected to activesync one is connected to the network of the pc with activesync
unless steps have been made on the pc, pda or office network to block it
i surf with bluetooth connection to activesync all the time

Likewise i use the USB active sync connection to connect to the internet on my Trinity, and Alpine as well. The only restriction, as mentioned, is that if the PC has limited access rights then so does the PDA.

Hey thanks Rudegar & deedee, I didn't know this actually
So simple and obvious, but I never tried it out
Guess I'll have to install Activesync on the [email protected] too then....