I hope somebody can help me!
I recently flashed the ROM on XDA Exec (to Jwrights ROM), which i have done in the past with no problem.
Now when i start the device, the screen just goes multi coloured and freezes until I remove the battery! I have tried reflashing with no luck (with several different ROMs). I know its not the screen, because I can still go into bootloader and the screen is fine. I now have three questions:
1. Can anybody help!?
2. I understand it might be a broken flash chip. In this case I have another XDA with a broken screen. Could anybody tell me how to change the good screen from the frozen device to the cracked screen one?
or,
3. Can it be repaired in the UK (anybody know where and how much?)
Sorry for the long post. I hope someone can help, because I would hate for my otherwise awesome device to be bricked!
Related
hi all,
i have an htc p 3300, actually used to have... becasuse;
i have tried to upgrade to wm 6.0... no problem seems to appear for the first two days... but then, suddenly screen gone black... i have tired to reboot it but no way... i took the battery away for a while... then it worked... i downgraded to 5.0... but the same problem still exists... now the situation is; if i remove battery for a while, it works; both in bootloader, and normal wm 5.0... i uspl it, flash new rom... but the common things such as 260-270 errors etc... a few times i succeeded to flash new rom... it worked again.. but then screen goes black as if it was broken... it is freezing and getting fade to black...
any body could help me???? i've been working for 3 months.... i bought a new kaiser plus a new iphone... but i miss my arteMISS
hate to say it but in this situation I'm inclined to think that it is a hardware issue.
Sorry you have this issue. I have a service manual for my Wizard/Prodigy.
There may be a way for you to put your ppc into bootloader by using the buttons, and then reflash the rom.
I once had a malfunction flashing the rom and that fixed it. on mine it was [Camera +Reset+release camera] i don't know if that might work, but it is worth a try to put your phone into bootloader first. also, you should remove the battery and hold the power button for a few to make sure that the ram is completely wiped. Flash the official rom and see if that worx.
Good luck.
hi
My artemisis also dead. Afterhard reset it start the bootscreen and nothing als. What must i do ?
Please helo my. Thanks
Hi guys,
i just figured out, that my xda ii has very wide expansion world.
unfortunately i experiencing very bad problem. somehow during the process of ROM upgrading, suddenly the screen went blank. no responds even after reset (hard and soft reset), also no USB connection to PC, there is nothing.
the upgrade is from ROM 1.66 (original ROM) to ROM 1.72.
now i desperately asking for your advice or hints from your experiences how to revive my precious xda ii, i really love this gadget and i got it as my birthday present from my family.
i hope someone out there could help me to solve this problem.
many thanks,
many regards
never went back from post wm5 to older roms so i dont have any exp with it
but did you flash the extentedrom nbf file? if not you may have to reflash that using the flashtool same as if you were flashing rom or radio
and does it include the config.txt where all cabs to be run are listed
and the autorun.exe or what ever it's called?
thanks for your reply rudegar,
the problem is, i cant get into my xda at all, no bootloader screen appears. even though the usb cable plugged in, my PC wont recognize it. I can say it is in dead state.
do you have any clue, if its true dead, hoq to ressurect it?
I hope you or someone could come up with something
thanks before
Hello
First I am many sorry if repeat but I still not know what I can do. I buy mobile and I thing is Type 2b (still on operator logo) but I don´t know how I can find solution, because I tryed flash with many roms and I tryed latest radio rom and everything done but when is finish it restart and than is still in orange logo (or HTC and etc). and about two seconds show NO GSM.
I have SPV m3100 with SPL-1.40.Olipro.
PLEASE help me I cant find solution !!!
Many thanks and many sorry if repeat threat
Try a hard reset. You DON'T have Hard SPL on your phone. It may be unlocked but it may not be Supercid. The best idea would be to flash the original carrier rom on to it and see if that fixes it THEN flash Hard SPL on it.....
Good Luck...
Its possible you may not be able to recover your radio rom...
Hello,
Thank you, but I tryed originall shipped rom and original rom from orange site. Everythings done fine. I tryed also radio rom and it done OK. I dont know what I can do.
Please can you send me links for there roms which I can flash?
I wish I can repair.
Thank you in advance.
If the shipped rom fails you are probably looking at a permanent brick. There are some other things you can try using MTTY but it may not be hopeful. This is one of the pitfalls of buying a "bricked" phone. It may not be fixable and you spent $$$ that could've been spent more usefully elsewhere...
Hello,
thank you for reply, and how I can use there MTTY and when I start it it is like other working pda and it flash led lights, only for second, like when you flash new rom and when start and then it flash light and then screen change for "tap on screen" but here only flash and dont change screen.
Do you know what I mean?
Does it say "tap on screen to setup"?
If so you may be looking at a bung digitizer. You will need to replace the LCD to fix this.
Hello,
no, it is only like it, it stay orange logo, but when "blik" "NO GSM" it blik all display and than stay in orange logo too
Do you thing if JTAG help me?
can't say, never used. You do need some technical skill to use the Jtag method...
yes I have some technical skills but I dont have any schematic of jtag cable.
EDIT: I find some pdf with two schematics:
1. Holly Gates' Schematics for the JTAG Dongle
2. Modified Schematic for the JTAG Dongle Circuit Using 74LS541
Which can I use?
Hello people,
My NIKI200 (UK T-Mobile Touch Plus) is sticking on the second splash screen (the one with the radio informaton etc in red) during the boot up. It does not go any further, I 've left it for a couple of hours and it's still stays there.
It's all unlocked and I've been using some of the more popular ROMs, not sure which one is on there at the moment, but I've not flashed it for a month or so now.
Has anyone had a similar problem? or dos anyone know why this might be happenin, or more importantly, how to solve it?
Many thanks,
James
Try to reflash your phone from bootloader screen (the tricolor screen)
How do I do this?
I thought you had to have an activesync connection to flash the phone.
Cheers for the reply
Managed it
Thanks very much
same problem but nothing working. i have niki200.
stuck in spl-1.16.000 and i cant get out of it. please someone help me
hi,
My volumeUp and Volumedown buttons are broken (don't works when i push it) and I MUST use a bootloader procedures tu fix a original ROM in my HTC HD to bring it to repair and check wich SPL is installed. (no HSPL for warranty!!)
is there some procedure or sw to put my HD in bootloader? MY actual ROM installed is TIM_IT_1.13.401.0 and Radio_52.49a.25.26_1.09.25.14. I think that I put the original ROM on it but I must be sure to had put a original SPL and not HSPL (for warranty)
Is there a procedure to check it whitout put it in bootloader mode?
Thanks
I have this problem to. My volume button down is also broken, and I'm no longer able to lower the sound. Sound buttons are one of the most important functions of a phone. I e-mailed HTC for this and they replied back that broken volume buttons aren't appearing on the Touch HD's. No warranty, no option to repair it. I've sended a lot of pictures of the broken button, but they didn't respond to my e-mail. Keep in mind when buying a phone next time: If you wan't better service and support I think you have to search for another company next time. Sorry, but I don't appreciate this kind of service. I have decided not to buy a HTC phone again. I'll try to find another brand who cares about service and keeping customers happy. HTC = game over for me now, even if they bring out the best phone in the world.
I am using the Ruu.exe file to flash a rom. This is the only way I have found. Only problem is I can't lower the sound immediatly when I need it and can't flash all roms because some doesn't have a RUU file included.
Good luck!
Hi,
very bad situation! I don't know here in Italy what a HTC will answer me! For the moment I must try to put my phone in the original condition; I Flash the original ROM whit RUU and also a SPL (maybe) I MUST CHECK MY SPL VERSION... and I can't if I cant Reach a BOOTLOADER STATUS.... Nobody know if there are some other procedures or software to reach it?
Was anyone able to figure out how to fix this issue?
Because this is my first post, i am not able to post a link of what i found.
On ebay itself, there is the button for sell, but i don't think that would fix it.
Ok,
Here you have, copy the exes to your device first.
EnterBootloader.exe will put your HD into bootloader (the installed one)
Manual-SPL.exe will put your HD whith an special bootloader allowing overwriting the HSPL
HelpMe - LCD problem
Dear Friends
Yesterday I dropped my blackstone and now there is no display at all (except one vertical light almost two inch width) and the remaining parts LCD is blank. but works perfectly as i feel vibration when i receive calls.Pls help me
hayyan said:
Dear Friends
Yesterday I dropped my blackstone and now there is no display at all (except one vertical light almost two inch width) and the remaining parts LCD is blank. but works perfectly as i feel vibration when i receive calls.Pls help me
Click to expand...
Click to collapse
you can try to learn HTC_Blackstone_Service_Manual that can be obtained from http://www.mikechannon.net/page1.html
Hakim Rahman said:
you can try to learn HTC_Blackstone_Service_Manual that can be obtained from http://www.mikechannon.net/page1.html
Click to expand...
Click to collapse
Thanks for the reply, i checked this but the problem is i cant see anything on screen!! but i m sure there is no crack at all (no visible crack - what inside i dont know) any way thanks for the reply
mac_es said:
Ok,
Here you have, copy the exes to your device first.
EnterBootloader.exe will put your HD into bootloader (the installed one)
Manual-SPL.exe will put your HD whith an special bootloader allowing overwriting the HSPL
Click to expand...
Click to collapse
Many thanks. Had the same problem on my Blackstone (broken volume button) and couldn't get it into the Bootloader. You .exe file solved the problem!