I hope somebody can help me!
I recently flashed the ROM on XDA Exec (to Jwrights ROM), which i have done in the past with no problem.
Now when i start the device, the screen just goes multi coloured and freezes until I remove the battery! I have tried reflashing with no luck (with several different ROMs). I know its not the screen, because I can still go into bootloader and the screen is fine. I now have three questions:
1. Can anybody help!?
2. I understand it might be a broken flash chip. In this case I have another XDA with a broken screen. Could anybody tell me how to change the good screen from the frozen device to the cracked screen one?
or,
3. Can it be repaired in the UK (anybody know where and how much?)
Sorry for the long post. I hope someone can help, because I would hate for my otherwise awesome device to be bricked!
Hey all
Apologies if this has been covered before. Have read many threads but still have the problem.
I have an Orange M600 G4 which I unlocked using the Lokiwiz03 util. This appeared to be successful and I was able to operate the device on a different network.
the next day I reset the device (using stylus in hole) and it now boots no further than the orange splash screen where versions are displayed.
I have entered the bootloader and attempted to reflash with a couple of different Roms - The Prophet_Orange_UK rom and a NVID_WM5 Rom. Both appeared to be taken ok and completed. The device still sticks at the same point on rebooting though (Orange Splash Screen).
Anyone able to assist me with this at all?!
Many thanks.....
i had a similar problem, my jamin was stuck in bootscreen, i tried all methods no one was usefull...one day i tried to power up while charging and problem was solved...no stuck at bootscreen or so..=) donno if it works works for you but worth to try...
.... Seems the device will boot after about 30 minutes if left. Same thing happens again if reset. Very confusing and annoying!
I just realized I should post this here instead.
Hello,
Today I upgraded my G4 HTC p4300 using the TNT ROM Pro+HTC Home. It is unlocked, but the splash screen was branded for Unicel.
The Upgrade seams to have worked on the computer end of it, but When I boot my device, it shows HTC Mobility logo, then goes to the Red, Green, Blue screen. If I plug it into the computer with USB, I hear the USB connection sound, and USB appears in the lower left hand corner of my p4300.Active Sync does not see my device. I tried Re-flashing the ROM and it gives me an error. I have also tried the Wizard love ROM Spanish version(couldn't find the English) that resulted in a connection error.
What should I do?
Any help would be greatly appreciated.
Who is your cell carrier?? I only ask because you're one of the only other people that call your phone the "P4300" I've had mine for over a year and know everything their is to know about it. I've discovered through trial and error and befriending an HTC big shot that the P4300 Wizard was the generic version of all the Wizards countless incarnations. My point is I've got the correct roms and ext roms to get you back in business. let me know.
Aaron
HTC P4300
Hi all,
i have a problem with one device here - Orbit II.
It is stuck on booting WM with volume controls on the screen. Usually it's not a big deal and can be solver with HR or by flashing a new rom, but the problem is that i cannot get it to do a HR: white screen with warning appears but when i press send buttong(the green one) - nothing happens, it doesn't react at all.
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Magnus23 said:
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Click to expand...
Click to collapse
press & hold camera button and make soft reset...
Thank you for the answer but i as said in first post, i have tried this, the white screen with the warning appears but pressing Send button does nothing, device does not react to this, so hard reset doesn't happen.
If someone could point to me any other way to enter bootloader - i can work my way from there.
I have also tried MTTY but USB connection doesn't appear in the list(yes, i have killed the activesync processes).
which screen
1st,
2nd, radio protocol version
3rd gif splash
4th wimo load screen
And also what rom have you got on atm.
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Magnus23 said:
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Click to expand...
Click to collapse
o well then i take its not hard-spl'd in which case i really do not get it, i have got into bootloader at the radio version screen so i dont get this one?? Is it still covered by o2 warrenty, it is 2 yrs long so best bet go to them and see what they say...
Thats if it has no hard-spl... If not take the battery out for a day and see if that brings it back to life, stranger things have happened seen that solve quite a few problems.
Well, device is not mine, a friend asked to look at it. I don't think he got a warranty left.
Well, the thing is, its not a big deal realy, it's not bricked or anything, i just need to get into bootloader, from there i can flash hardspl and the rest from SD... i just haven't seen this thing before... unable to enter the bootloader.
Is there any way to force the device to enter bootloader? I mean other than the standart procedures of Camera+reset?
I think i've seen somewhere a CustomRUU that could do that, even with incomplete WM boot. Like send some commands to the device to enter bootloader.
Does anyone know anything like this?
Hi I've Instaled Canon Yang hspl..and rom but need to get back to stock my wife doesnt like the mod any help thnx in advance...
Which phone do you have:
The Blue phone is the Wing..
Any other color is the HTC Herald..
For Wing
For Herald
Download the appropriate Orig ROM and then connect your phone to the computer. Next, Go to soft reset the phone but hold the camera button in until you see a Red/Blue/Green/White screen. Look for the letters USB in the lower left hand corner. If you see this, then you can run the .exe file and the flashing will begin. Just follow the directions on screen.
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj