Help needed to setup WIFI - 8525, TyTN, MDA Vario II, JasJam General

I have an Asus WL-500G Premium router and till yesterday it works all fine....I had to make a hard reset on my SPV M3100 cause have a lot of instability issues after the hard reset I cannot setup my network any more. Have tried everything out but without success...I have the router set to MAC filter and WPA+PSK as I have it for few days but now after the hard reset the SPV find the network but cannot connect. After a while I have tried to put the router in state withouth the MAC filter and on open network and still nothing...are there any tips to get it work? I think the problem is in my SPV and not in the router cause it is only one week old and before hard reset it was working like a charm with MAC filter and WPA+PSK...and now nothing...
Regards,
Primoz

Related

wi fi connection problem

Hi,
My mini s seems to have a problem connecting to my home network. When i switch the wi fi on it searches but does not connect. I hard reset a coyuplke of day ago and switch on the wifi and it found my network then promted to enter key, which i did. The phone then connected no problem. No when i switch wifi on it doesnt connect. I go into network cards tab and look what networks are available and my network is there with available next to it but the options have all change (key be given out auto etc...) so i change them to the correct ones etc.. but still it doesnt connect? What i'm i doing wrong? I has worked in the past but not now. I have not installed and 3rd party software and my router is working fine (laptop downstairs works no problem off network).
any ideas
cheers
hi,
i just reseted my router and renamed my homenetwork and assigned a newwep key. started wifi on mini s and it connected straight away to the my newly named network. switch wifi off then on again and now it wont connect. it see's the network and says its available but wont connect. under the settings the network key has changed. it's defo a problem with the phone cus everything else works fine (laptop, psp). it's just not saving the network info???
and ideas???
cheers
think it could be because i've upgraded to o2 new rom??? Could somebody with the latest UK o2 rom please confirm that ther can connect to the networ?
cheers
This also happens to me with the latest O2 ROM.
What you have to do is to manually connect and perservere by going to Network Cards, tapping the network and then select Connect. It may take a few go's but it will connect eventually.
Report back how you get on.
You may want to set up your router to assign a fixed IP address to the Mini S's MAC address as well.
Sounds like the problem I've been having. I've also got an O2 rom and am having problems connecting to any wifi network, even though it worked fine the first time.
I've tried going to the network cards page and clicking connect, but it hasn't worked so far. talkingbollox - when you say 'eventually', how long are you talking?
I'll also try assigning a fixed ip address later, but my hopes aren't high.
when you say 'eventually', how long are you talking?
Click to expand...
Click to collapse
Sometimes 2 attempts, sometimes up to 20.
Persevere!
20! I probably tried about 10 times before I gave up. Surely this is a fault. You shouldn't have to waste so much time just to get a connection! :x
I tried MAC address filtering too but that didn't seem to work.
Do you think this is a O2 ROM problem or a hardware problem? If it's just O2, I think I might try a different ROM. Any suggestions which ROM to use?
My Mini S came already with the latest rom I think, and it works fine with my router (BT Voyager 2110)
Are you guys using the 802.11g reg edit?? Maybe thats why its not working, I actually did the hack before I ever turned on my wifi so I don't know if it worked without it. Try it My wizard connects with my router in G only 8)
Search the forum you will find loads of posts about it, and I think somebody has even made a cab file that does it for you, along with some speed tweeks that make your system faster.
It must have taken me in excess of 40 goes to connect last night.
Yes, I am using the g mode hack. My Voyager 2100 is set to broadcast in both b and g (i.e. mixed) mode.
I had the same problem... what I did was just entering the dns adress of my router.
So the ppc doesn't wait for the dhcp server to asign it .. it works great when surfing at home !!!

Explorer stuck on "Locating.." and cannot load web

I'm not sure what i have done here, because up until about a week ago my jasjar worked fine with my wireless home network. Then, for some unknown reason, it has stopped.
It connects, then spends an age locating and opening, but does nothing. I have tested the signal (good), increased the performance and reset the connection on both the router and the jasjar.
Is there a schoolboy error that I am making that someone could make me aware of, or is there a solution that could resolve this. I had got used to using the net in my bed you see...
if you're not configured to obtain your DNS from DHCP; you DNS maybe suboptimal.
had the exact same prob today!!!! turned out that though the exec was showing as being coonected with the network infact it wasnt....just try to open your routers setting page...usually 192.168.1.1 if it opens then the prob is after the router otherwise before it.... had to hard reset my exec....
Solved
I simply deleted all connection info, and let the jasjar find my system again. Once found, had to reenter the connection info, and bingo, b3ta was readable again! Thanks for the replies folks!

WI-FI network adapter disappered

I installed AnthaVPN but it was causing my wifi to stuck every second time, so I uninstalled and now my wifi doesn't work at all. actually my wifi adapter seems not to be present anymore and the self diagnostic gives fail on wlan module test. I have seen that in the registry anthavpn is still present in many places and also in network adapter I can still se AnthaVPN wireless adapter.
Please help me to get my wifi back.
Next time, do a google search for your app BEFORE you install it.
http://www.aximsite.com/boards/showthread.php?t=107949 - people trying to get rid of AnthaVPN.
About the only thing you can do now is a hard reset, since Antha seems to have successfully hijacked your wifi stack. Hard resetting should bring the device back to factory condition, which means NO AnthaVPN reg entries.
The alternative is reinstalling Antha so that your wifi stack will work again. <_<
I confirm unfortunately!
Only way to get rid of Antha VPN has been hard reset. Really a bad experience with that piece of software!

VPN over GPRS/3G

Hi there,
I have a serious problem which I need to solve because it is crucial.
I've used VPN for very long time without any problem with my Trinity.
Few days ago I tried to connect my VPN and the phone just continue to dial forever. The connections application in Settings became inresponsive i.e. I was unable to cancel the dial. After several soft resets and many swears I found that the GPRS/3G/HSDPA connection work perfect and the problem is not the network. I test the VPN with my PC and it worked too. I've deleted the settings from the connections panel and from the registry itself and recreated it all again. No luck at all.
I've totaled my options ... so I'm asking anyone willing to help with this issue.
No specific network applications are currently installed on my device except WMWifiRouter. I've tried Hamachi but it is now uninstalled. The VPN was working perfectly with or without WMWifiRouter & Hamachi. I'm sure of it.
I have a similar Problem, try this: delete all your WiFi Settings and reboot then the VPN over GPRS will probably work, till you connect to any WiFi next time..... I am also stuck in the next here.
I hard reset several times while it start working again.
The problem was not the wifi because after first few HR (they delete everything) the VPN was still not working.
This was a mystery for me.
P.S. It seems that this OS was written in the breaks between classes by retarded students. Although it has no real alternative for the moment.

Can't connect to WiFi using Touch HD

Hi everyone.
First off, I know there are a million and one other threads.. believe me.. I have searched!
Basically my phone won't connect to my network. It was working fine earlier today. I've tried changing all the security settings in my router (turning off encryption for example). I've tried soft resetting and hard resetting the phone.
Nothing seems to be working. It finds the network fine, but it just says 'Connecting' then goes to 'Available' but it won't use the wifi connection.
Any ideas?
Thanks!
Have you tried connecting your device using a friends wifi router to see if this connect you
Nope. I forgot to add that I will try connecting to work's WiFi tomorrow!
Anything to try in the mean time?
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
miland said:
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
Click to expand...
Click to collapse
1) Can't see any settings under my router.
2) Tried disabling gnitro (Belkin router), no difference.
3) No difference
4) Already on that.
5) Turned off.
It's so odd. Works fine with an N95.
I don't think it's anything to do with my router because like I said it worked fine earlier on in the day then suddenly stopped. The router settings hadn't changed.
Edit: I've tried turning the router security off altogether also. I really don't feel it's an issue with my router.
Tested the phone at work. It works fine.. so I don't have a clue why it's not working at home? Surely the router can't be incompatible with the phone.. especially considering it worked at one point.
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
AltF4me said:
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
Click to expand...
Click to collapse
Maybe uve tried this already but could be the fact that your home internet access point is listed as Work rather than internet, used to have an issue with mine cause of that.
I also have this problem.
Reset did not help.
Listed as internet or work did not help in both cases.
Real weird!!
I've got the same problem, all of a sudden my hd won't connect to my router.
I can connect to open networks (wi-fi hotspots etc) so i know the wifi in the phone is working ok and my partners diamond can connect ok to my router, so the router is obviously ok.
Have reset the router as well and haven't changed any settings on the phone.
Don't understand!!!!
as other users point out within other threads, it seems that Blackstone has a problem connecting to wifi networks when WPA Authentification is enabled
try to disable it. it worked for me and soem other guys
good luck!
I could connect to my router fine using my laptop.. but I still had to reset my router to the factory settings before it worked again on my Touch HD.. then I could enable WPA and everything back again. So try that!
i thought i had a similiar problem, mine wouldnt connect to wifi, kept switching itself off. figured this is normal when its connected to usb. unplug usb and it turns back on!
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
Hi
I used to have problem using any secure wireless connection. Then I realized that you need a personal certificate to use secure wireless networks. It uses certificate to encrypt connection between access point. I have access to a windows certificate server so I created a personal certificate with private key and import it to my mobile. Now I can login to any secure wireless network.
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Fallen Spartan said:
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Click to expand...
Click to collapse
That solution doesn't seem to work for this problem.
Resetting the router does seem to work.
I don't get why resetting the router works.... other devices can still connect no problems before resetting, so it only seems to be aproblem with the hd.
It also sux when you are using a public router with this problem that you can't reset.
Connecting to Belkin router
Guys, I had the same problem as well. HTC touch HD used to connect to the router fine but after installing an update/upgrade it would pick the signal from the router but would not connect. (I was using WEP authentication at this time)
SOLUTION:
Go to belkin router configuration on the web.
Under security change the Securtiy Mode to WPA/WPA2-Personal(PSK)
Change authentication to WPA-PSK
Select Encryption to TKIP and enter your password.
GO to your HTC touch HD's WiFi setting and turn Wifi ON. Select your home network SSID and edit it using the information you used on the router i.e. WPA-PSK ; TKIP, enter your key/password and click next, next and finish.
Worked for me....hope it helps.
WIFI not connecting
That truly is extremly nasty.
I have the same issue - wifi found, correct password (WEP, WPA all settings) but no successful connection.
Took an old HTC 3xxx - runs immediately.
I can not reset the router - there are too many users, they will kill me then.
So I installed an Access point (Sparklan WX 7800A) to play with.
Notebooks (HP, MSI and ASUS) have successful internet access, also the old HTC 3xxx.
But still the HTC HD does not connect.
Tried "WIFI Monster" - shows the wifi, but does not connect.
(But it deletes all wifi entries easily - so you can set them up new)
Tried with NO security/password: same issue.
WEP, WPA (all kinds): no connection
There must be something to be changed in the registry - but I have no idea what & where.
Or is the wifi that useless ?????
Maybe someone can help
Ciao
Mike
I had the same problem. But the problem stopped when i connect my htc HD to my laptop and used activesync to connect to internet. After i disconnected it, open wifi and... works ok!!

Resources