Explorer stuck on "Locating.." and cannot load web - JASJAR, XDA Exec, MDA Pro General

I'm not sure what i have done here, because up until about a week ago my jasjar worked fine with my wireless home network. Then, for some unknown reason, it has stopped.
It connects, then spends an age locating and opening, but does nothing. I have tested the signal (good), increased the performance and reset the connection on both the router and the jasjar.
Is there a schoolboy error that I am making that someone could make me aware of, or is there a solution that could resolve this. I had got used to using the net in my bed you see...

if you're not configured to obtain your DNS from DHCP; you DNS maybe suboptimal.

had the exact same prob today!!!! turned out that though the exec was showing as being coonected with the network infact it wasnt....just try to open your routers setting page...usually 192.168.1.1 if it opens then the prob is after the router otherwise before it.... had to hard reset my exec....

Solved
I simply deleted all connection info, and let the jasjar find my system again. Once found, had to reenter the connection info, and bingo, b3ta was readable again! Thanks for the replies folks!

Related

PC, WiFi, PPC, IP solution?

OK so after having problems connecting my XDA2s to my laptop via wifi to use it's ADSL connection, I began to realise it was a major issue for a lot of users.
Having covered almost all the threads here regarding PPC WiFi issues, I still am perplexed as to how the whole thing is successfully set up.
I concluded that it was virtually impossible; that the PC would not provide the PPC with an IP address so I would have to use some sort of application to manage the connection. However, yesterday for some reason only the omnipotent holy deities of the grandiose gods of WiFi would know, I had it working perfectly. For about 10 minutes, until I decided to disconnect to see if I could readily re-connect. My hopes were of course, dashed, and I have not had it working again since.
I have tried every combination of settings on both the laptop and the XDA to no avail, and have followed more threads and links than I can count on my fingers and toes. I've tried all the same settings I had when it was working (briefly) but still have no real success.
So basically, what's the deal with getting this damn thing working? Maybe what I need is a step by step idiot's guide on how to initially set up the wireless network on the laptop first, to make sure it has all the right settings? I'm using a Vaio running XP home (built in WiFi).
Has anyone completely resolved this problem yet? I would really like a solid, clean method of setting up the connection rather than stumbling through a million different combinations of settings and ending up with something hashed and unstable.
Many thanks for any help on this, I'm sure it's a tiresome subject for many.
......And as is always the case, as soon as you post about it you figure it out!
If anyone is still having trouble using their XDA2 to connect to a PC's ADSL via WiFi, ive got it figured!
RE: ive got it figured!
PLEASE HOW? I HAVE ALSO THE SAME PROBLEM HERE
THANKS
Me too. I have a XDA mini S.
I don't know what settings to put into the thing. I had it connected for a short while but when I went into internet explorer it started connecting to GPRS instead of WIFI to internet.
Clearly I haven't got a clue. The book is of no help either.
Any ideas?
Thanks
Think i'm connected to the internet. It doesm't seem to want a password although one is listed listed in the router. Just can't stop it going over GPRS instead of the wifi for intenet????
problem solved
Hi All
Ok heres what I did .
Connections
under my work network
set ,set up my proxy server to "this network connects to the Internet.
Then go to advanced
Under select networrks ,Network management,Set both to "my work network"
Network Card
Network adapters
"My network card connects to work
Then select the network card ie sandisk
tick Use specific ip address
type in 1 thats on your network ,It will connect but you wont be able to browse still
Then soft reboot
change from use ip adress to "server assigned ip address"
soft reboot
and bingo

wi fi connection problem

Hi,
My mini s seems to have a problem connecting to my home network. When i switch the wi fi on it searches but does not connect. I hard reset a coyuplke of day ago and switch on the wifi and it found my network then promted to enter key, which i did. The phone then connected no problem. No when i switch wifi on it doesnt connect. I go into network cards tab and look what networks are available and my network is there with available next to it but the options have all change (key be given out auto etc...) so i change them to the correct ones etc.. but still it doesnt connect? What i'm i doing wrong? I has worked in the past but not now. I have not installed and 3rd party software and my router is working fine (laptop downstairs works no problem off network).
any ideas
cheers
hi,
i just reseted my router and renamed my homenetwork and assigned a newwep key. started wifi on mini s and it connected straight away to the my newly named network. switch wifi off then on again and now it wont connect. it see's the network and says its available but wont connect. under the settings the network key has changed. it's defo a problem with the phone cus everything else works fine (laptop, psp). it's just not saving the network info???
and ideas???
cheers
think it could be because i've upgraded to o2 new rom??? Could somebody with the latest UK o2 rom please confirm that ther can connect to the networ?
cheers
This also happens to me with the latest O2 ROM.
What you have to do is to manually connect and perservere by going to Network Cards, tapping the network and then select Connect. It may take a few go's but it will connect eventually.
Report back how you get on.
You may want to set up your router to assign a fixed IP address to the Mini S's MAC address as well.
Sounds like the problem I've been having. I've also got an O2 rom and am having problems connecting to any wifi network, even though it worked fine the first time.
I've tried going to the network cards page and clicking connect, but it hasn't worked so far. talkingbollox - when you say 'eventually', how long are you talking?
I'll also try assigning a fixed ip address later, but my hopes aren't high.
when you say 'eventually', how long are you talking?
Click to expand...
Click to collapse
Sometimes 2 attempts, sometimes up to 20.
Persevere!
20! I probably tried about 10 times before I gave up. Surely this is a fault. You shouldn't have to waste so much time just to get a connection! :x
I tried MAC address filtering too but that didn't seem to work.
Do you think this is a O2 ROM problem or a hardware problem? If it's just O2, I think I might try a different ROM. Any suggestions which ROM to use?
My Mini S came already with the latest rom I think, and it works fine with my router (BT Voyager 2110)
Are you guys using the 802.11g reg edit?? Maybe thats why its not working, I actually did the hack before I ever turned on my wifi so I don't know if it worked without it. Try it My wizard connects with my router in G only 8)
Search the forum you will find loads of posts about it, and I think somebody has even made a cab file that does it for you, along with some speed tweeks that make your system faster.
It must have taken me in excess of 40 goes to connect last night.
Yes, I am using the g mode hack. My Voyager 2100 is set to broadcast in both b and g (i.e. mixed) mode.
I had the same problem... what I did was just entering the dns adress of my router.
So the ppc doesn't wait for the dhcp server to asign it .. it works great when surfing at home !!!

Wi-Fi Doesn't Connect

Okay, I've searched, sifted through a boatload of possible threads relating to mine and still haven't found a resolution to my problem.
My Wi-Fi doesn't connect to my wi-fi router at home. My laptop connects perfectly fine without any hiccups. I've gotten the wi-fi to connect to our local Apple Store's wi-fi network to access the internet.
I double checked the password like a hundred times, disabled to proxy, and made sure the network is connecting to the internet and not on the my work settings.
I'm still using WM5 and not sure if it's an issue with the OS or not.
Please someone lend a helping hand. I've spent many hours researching this problem and still nothing.
Note: I did get it to connect only once when I first got last week and it didn't work again after I left the house. I've master reseted the damn thing over 5 times just to make sure.
1.Erase the settings for your home network out of your phone 2. Remove the security from your router and try connecting again
If that does not work hard reset the router again and try to connectthrough its default settings (make sure their are no saved wifi networks in your phone)
sprice82 said:
1.Erase the settings for your home network out of your phone 2. Remove the security from your router and try connecting again
If that does not work hard reset the router again and try to connectthrough its default settings (make sure their are no saved wifi networks in your phone)
Click to expand...
Click to collapse
I've tried your method. The first didn't work.
The second method worked. I had to hard reset my router and try again and it finally worked even with my password. I also master reset my phone prior to hard resetting my router.
Thanks for the info. Would you happen to know why it might have done that?
It might have bveen the security settings on the router or your router was just blocking it all together...
This sucks. It eventually keeps doing the same thing again and again. When I leave my house and try to reconnect later when I get home, WHAM! No connections. It can find my router and says it's available but when it tries to connect, it can't. I don't know what the hell is wrong.
I've master resetted both my phone and router and started all over from scratch.
On my Linksys router i use no security protocols. i use MAC address filtering instead. If the router does not have your mac address you can not connect. Drives the neighborhood war-drivers crazy!! It says unsecured, but they can not connect no matter what they try!
me neither
Since I installed wm6, my wifi will connect to my network but apps like internet explorer won't load a page , it just stays stuck on : "locating...."
any idea?
guesserit said:
Since I installed wm6, my wifi will connect to my network but apps like internet explorer won't load a page , it just stays stuck on : "locating...."
any idea?
Click to expand...
Click to collapse
Me 2, same thing.
Go to the settings for wifi and go to "Configure Network adapters" and make sure the all say the "The internet" and not "work"
sprice82 said:
Go to the settings for wifi and go to "Configure Network adapters" and make sure the all say the "The internet" and not "work"
Click to expand...
Click to collapse
That's the first thing i did buddy.
I am not really sure what it could be then, when I intaslled the official cingular wm6 Rom it was doing the same thing then I did a hard reset and when it was installing the extended Rom I did a soft reset and that fixed it, but then again I hyad to manually put all the settings in.
You might want to check if your really connected... If I start mine out about 1 inch from the router and get connected, I can walk all over the house and it will show connected (even updates the signal strength). However...IE will just keep saying 'locating' like yours. This is because it cannot reach the wifi base with it's buggered up transmitter. I don't think there is a cure for this.... Ikeep looking though...
badbert said:
On my Linksys router i use no security protocols. i use MAC address filtering instead. If the router does not have your mac address you can not connect. Drives the neighborhood war-drivers crazy!! It says unsecured, but they can not connect no matter what they try!
Click to expand...
Click to collapse
How do you do that and find the mac address on the 8525? I'm using Black Majik's cooked rom so it may be different from the original WM5.
Also an update on hooking to my router. I disconnected my router and cable modem and left it off for about 3 minutes. I then plugged it back in and let both reset. I connected afterwards and it works fine. Don't know what will happen later on when I leave and it disconnects.

How I solved Wifi problem

Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
I have a similar WiFi connectivity problem, but after reading of the poor service provided by most vendors and HTC itself, I will try to gather some more experience with the problem before I contact HTC or my vendor, and hopefully find a solution. Bellow is my experience so far:
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
I could add to the above mentioned problems.
i got a new hd just few days back.
The wifi worked great. But now it doesnt.
I have disabled wifi, so can start it whenever i require.
I click on wifi button to enable it.
Then open opera, try any website.
it will open fine.
For instance say my email at gmail.com
Now after that if i try to open anysites or even continue with my mail, it shows error saying connection not available.
One of the workaround is to go back to toggele wifi off and switched it on.
Not sure if anyone faces a similar issue.
I's been about a week since my last post and I have already witnessed a couple of cycles of WiFi connecting perfectly and then not connecting at all.
No matter the settings I try after it decides not to connect, it won't. Even to nodes it had connected perfectly and fast jus minutes before.
I thought re-flashing might help but so far has proven ineffective. Once I thought some part of the non-volitile memory was causing the problem since after I cleared the memory I could connect for a while.
Any thoughts anyone?
Same problems here.
For the last hour I have been reading 10ths of threads here concerning WiFi problems.
My HD's WiFi worked fine on my home and outside for about 2 months. Now it doesn't. It reports connection, but no program can use the internet. At best, it seems to be able to exchange some Kbytes the for just a few seconds after a connection is established. Then nothing. Connected but unusable.
Tried everything Internet/My Work/My ISP, WAP enabled/disabled, soft/hard reset, everything.
When connected through ActiveSync everything works fine, all programs see internet.
Has anybody taken their HD to the service? Has any HTC service worldwide identified the problem as hardware and solved it by replacing something?
miskasp said:
Lately I have been reading many post related to Wifi problems in the HD. I had the same. Even I was very near my router I couldn't connect to the net and the signal was very weak.
So I entered my router configuration and I found a solution.
Before, for security options I had: WPA-PSK [TKIP] then I changed to WPA2-PSK [AES] (of course you also have to change your HD connection configuratoin), and now it works great¡¡¡¡
Now I have all the bars for the signal and I can connect very easily.
Hope it works for other people
Click to expand...
Click to collapse
I have just encountered a similar problem, but already used wpa/wpa2 with aes. Have tried a hard reset with no joy. My old HTC Touch has no probs connecting via wifi nor does my laptop so I would surmise that the prob is with the HD and not the router.
I am going to try flashing with the latest version of Duttys 6.1 rom and see what gives.
Edit: Tried flashing with new rom with no success. Take a look at this post.
http://forum.xda-developers.com/showpost.php?p=3769339&postcount=7
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Try to go into WiFi settings and move the power slider to max performance. I need to do it here to access my router. This happened also with my HTC TyTN II, with any recent radio firmware. The original WM 6.0 ROM and it's radio work fine in low power mode, but the new ones appear connected but are always at 1 Mbps and there's no traffic until you move the slider to performance mode.
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
(sorry for my english)
Dubh Llas said:
There are a couple of files to download but i only used the second ie this one.
http://forum.xda-developers.com/showpost.php?p=1363759&postcount=2
Now no problems and can connect via wifi no probs, ip address assigned by dhcp.
Click to expand...
Click to collapse
Yeah, but what if I 'm not Orange-UK (let alone UK) ?
vcespon said:
Try to go into WiFi settings and move the power slider to max performance.
Click to expand...
Click to collapse
1st thing I did. Problem still there.
campotino said:
You go into WiFi settings and you configure manual IP and DNS so as router.
DNS is important.
Whit manual configuration, Wifi work always.
Click to expand...
Click to collapse
This is not a solution. I didn 't buy the device to be able to connect to my home WiFi only. What about public hotspots? Or hotels? Or whatever outside your home?

Can't connect to WiFi using Touch HD

Hi everyone.
First off, I know there are a million and one other threads.. believe me.. I have searched!
Basically my phone won't connect to my network. It was working fine earlier today. I've tried changing all the security settings in my router (turning off encryption for example). I've tried soft resetting and hard resetting the phone.
Nothing seems to be working. It finds the network fine, but it just says 'Connecting' then goes to 'Available' but it won't use the wifi connection.
Any ideas?
Thanks!
Have you tried connecting your device using a friends wifi router to see if this connect you
Nope. I forgot to add that I will try connecting to work's WiFi tomorrow!
Anything to try in the mean time?
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
miland said:
Try these:
1) disable frame bursting
2) disable big packets and other methods of wifi speeding
3) force 11b
4) use WPA-PSK TKIP only
5) check if you have MAC or other access filtering
than let us know
Click to expand...
Click to collapse
1) Can't see any settings under my router.
2) Tried disabling gnitro (Belkin router), no difference.
3) No difference
4) Already on that.
5) Turned off.
It's so odd. Works fine with an N95.
I don't think it's anything to do with my router because like I said it worked fine earlier on in the day then suddenly stopped. The router settings hadn't changed.
Edit: I've tried turning the router security off altogether also. I really don't feel it's an issue with my router.
Tested the phone at work. It works fine.. so I don't have a clue why it's not working at home? Surely the router can't be incompatible with the phone.. especially considering it worked at one point.
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
AltF4me said:
Very weird! I got fed up with my router so decided to restore the factory defaults and start from scratch.. worked straight away! So I restored the settings back to exactly how they were before (using a backup file I made).. and it worked!
Just posting incase it happens to anyone else anyway.
Click to expand...
Click to collapse
Maybe uve tried this already but could be the fact that your home internet access point is listed as Work rather than internet, used to have an issue with mine cause of that.
I also have this problem.
Reset did not help.
Listed as internet or work did not help in both cases.
Real weird!!
I've got the same problem, all of a sudden my hd won't connect to my router.
I can connect to open networks (wi-fi hotspots etc) so i know the wifi in the phone is working ok and my partners diamond can connect ok to my router, so the router is obviously ok.
Have reset the router as well and haven't changed any settings on the phone.
Don't understand!!!!
as other users point out within other threads, it seems that Blackstone has a problem connecting to wifi networks when WPA Authentification is enabled
try to disable it. it worked for me and soem other guys
good luck!
I could connect to my router fine using my laptop.. but I still had to reset my router to the factory settings before it worked again on my Touch HD.. then I could enable WPA and everything back again. So try that!
i thought i had a similiar problem, mine wouldnt connect to wifi, kept switching itself off. figured this is normal when its connected to usb. unplug usb and it turns back on!
I own an HTC Touch HD since January and have a similar problem, only it surfaced last week. Before I had only used the WiFi connectivity briefly. The problems started after I installed an AP on my house expressively for the new PDA. The node is fully open and set to B/G/N protocols.
After a couple days of medium (couple hours per day) use the WiFi connection suddenly quit, the device would try to connect (the top bar showing the WiFi connection animation continuously) and after a few moments gave up with a dialog box stating the current network settings were wrong (even thou they worked fine a few hours earlier).
I tried several hot and cold resets, but only solved the problem after flashing a new ROM; even then the same symptoms reappeared after a couple of days of regular use. Again no re-setting would cure the problem, and now not even flashing the ROM again would work. Nonetheless, some hours latter the WiFi would connect perfectly with the same nodes it refused to before, and in very short time.
I have witnessed this cycle twice and have yet not been able to find a trigger for it, but will keep my eyes open for any tell tale signs, and post any findings here.
Hi
I used to have problem using any secure wireless connection. Then I realized that you need a personal certificate to use secure wireless networks. It uses certificate to encrypt connection between access point. I have access to a windows certificate server so I created a personal certificate with private key and import it to my mobile. Now I can login to any secure wireless network.
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Fallen Spartan said:
A solution has been posted for data connection problems. Can be found here
This may help, may not. Let me know
Click to expand...
Click to collapse
That solution doesn't seem to work for this problem.
Resetting the router does seem to work.
I don't get why resetting the router works.... other devices can still connect no problems before resetting, so it only seems to be aproblem with the hd.
It also sux when you are using a public router with this problem that you can't reset.
Connecting to Belkin router
Guys, I had the same problem as well. HTC touch HD used to connect to the router fine but after installing an update/upgrade it would pick the signal from the router but would not connect. (I was using WEP authentication at this time)
SOLUTION:
Go to belkin router configuration on the web.
Under security change the Securtiy Mode to WPA/WPA2-Personal(PSK)
Change authentication to WPA-PSK
Select Encryption to TKIP and enter your password.
GO to your HTC touch HD's WiFi setting and turn Wifi ON. Select your home network SSID and edit it using the information you used on the router i.e. WPA-PSK ; TKIP, enter your key/password and click next, next and finish.
Worked for me....hope it helps.
WIFI not connecting
That truly is extremly nasty.
I have the same issue - wifi found, correct password (WEP, WPA all settings) but no successful connection.
Took an old HTC 3xxx - runs immediately.
I can not reset the router - there are too many users, they will kill me then.
So I installed an Access point (Sparklan WX 7800A) to play with.
Notebooks (HP, MSI and ASUS) have successful internet access, also the old HTC 3xxx.
But still the HTC HD does not connect.
Tried "WIFI Monster" - shows the wifi, but does not connect.
(But it deletes all wifi entries easily - so you can set them up new)
Tried with NO security/password: same issue.
WEP, WPA (all kinds): no connection
There must be something to be changed in the registry - but I have no idea what & where.
Or is the wifi that useless ?????
Maybe someone can help
Ciao
Mike
I had the same problem. But the problem stopped when i connect my htc HD to my laptop and used activesync to connect to internet. After i disconnected it, open wifi and... works ok!!

Categories

Resources