i have an i-mate pda2 that is showing "No GSM" and 'D1.11.00". I tried reflashing with the original shipped rom, alphine_O2 stripped ROM and the other new roms but it all gave me same error "RUU encountered a problem and need to close" during stage 1 of the update everytime I run the MAUpgrade utility. From there it will stop. Any solution?
Thanks,
jrsantiago
You have to try out the sd-card method to flash a rom to your device! Get one member here who can make a copy of his rom to a 128 MB card, let this card send to you and flash your device with this rom image!
Related
I've managed to get myself stuck up a dead end.
My device: Orange UK spv c500.
SPL: 2.00.0013
OS: None!
I upgraded to wm2005 but despite updating the reg keys posted by subliminal I couldn't install the certificate I use to ActiveSync with my Exchange Server; so I decided to downgrade.
I immediately realized my first mistake - I didn't have a backup of the old ROM on SD. Instead I downloaded one from a link in one of the forums and used psdwrite to put it on my SD card. I ran the update, but it failed and the device wouldn't start.
My next mistake was to try and re-flash the 'phone with the latest Orange UK ROM (v4.2.1.1). What I'd forgotten was that this updates the bootloader at the same time.
The flash appeared to go fine, but on restart I'm stuck in the bootloader. When I attempt to re-flash again the summary in the RUU says "Image Version:" ie no image version present.
If I was still on a v1 bootloader I'd be able to run IU_SPL+PatchedRUU again to give me an IU mode bootloader. With a v2 bootloader I can run this as many times as I want, but it won't put a lower version on.
Without an IU mode bootloader I can't "r2sd spl" to use itsme's dowload tools. Without a working OS I cant use TyphoonNBFTools to flash the SPL.
Can you think of any other solution?
If there was someway to "con" the rom update process into installing an older version of the SPL I'd be OK. Alternatively if it was possible to change the version of the SPL in SPVDEVS-SPL.nbf I could get it on.
Thanks for your help.
robhughadams said:
I've managed to get myself stuck up a dead end.
I immediately realized my first mistake - I didn't have a backup of the old ROM on SD. Instead I downloaded one from a link in one of the forums and used psdwrite to put it on my SD card. I ran the update, but it failed and the device wouldn't start.
.
Click to expand...
Click to collapse
did you tried this rom backup with your card writer i used this one with psd write and it worked download this one and try it ;-)
greets { ps let me know if this time you sucseeded ;-) }
http://rapidshare.de/files/2633600/backup.rar.rename.html
Hello. I'm having major issues installing Touch-IT wm6.1 19199.1.0.0 - Full. I've installed at least 5 ROMs on my phone and have never ran into any issues. When I try to install the ROM it gives me error 270: The image file is corrupted. I've done Hard SPL and even installed the original TMO ROM but I cannot get any other ROM installed. Any help is appreciated. Thanks in advance.
uninstall and reinstall activesync
Hard SPL
i have readed all Guide, downloaded ROM " HardSpl_WM6 "
but when try to UPDATE it show me image version which is lower than mine and after cliking next, error message comes " ERROR 202"
tryed to uninstall "Activesync" and install again.. still same problem.. tryed 3 diferent HARDSPL... same problem.. need help.
Are you trying to flash an LZX compressed ROM through Activesync instead of via your SD card? Sounds like you are.
solved.
i solved. The problem was that i was using USB hub to connect. All now is OK, already installed WM6.5.. working good..
Please let me know the solution
i am also facing the same issue.......Sanjay, plz let me know how you resolved the issue.
i have made a mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i have downloaded the correct rom version from T-Mobile but it doesnt seem to work
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
as i said on the other post
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index..._Card_Flashing
hope it will work
i think you can get it from here
http://www.tm-phonedownloads.com/sd_compact3.html
if WM6 did not work.. try WM5
thanks i m downloading it...but tell me one thing if there is a software issue then why isnt ther any display i mean no backlight no display no charging led
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
i think that becuase the bootloader , ISP or one of these stuff are corrupted.. don't know.
and as i told once i got my artemis completely dead
and finally i got it fixed by putting the ARTEIMG.nbh in SD card as they said in the wiki and then by pressing the camera button and the power.
and it started flashing it as the SD card flashing but it took about 30 mins .. and there was three phases in the flashing progress which it was the first time i see.
having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
Click to expand...
Click to collapse
did you flashed it by SD card or RUU?
if you used RUU try by SD card flashing
did u get the same prob? i mean the phone seems to be dead? if so...there is a hope then
well...i used RUU simply downloaded it and tried to install by setup,,, dont know about card flashing but will try
where can i find that NBH file?
do u have that .NBH file?
you have to extract the file you using a program like winrar
there will be few files.. one of them is the nbh
that's how i got the nbh file.
and about the SD card flashing is here...
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Hey Guys!! I hope, you can help me...
I want to install a other ROM on my Orbit. But it allways brake up at 3%. So, i thought, maybe it would help to install the original ROM. Ok, now i've got the oooooold original WM6. wow...
I want to install a version of 6.5, but everytime it stops at 3% with the notice, that my ruu is corrupted (Error [270]).
So i tried to flash via SD-Card. Renamed the ROM from RUU_Signed.nbh to ARTEIMG.nbh but sometimes the orbit means, that the ROM isnt certificated but mostly the Orbit cant find anything.
So, please help me
Hi there,
I used to have a similar problem every time I tried with WM 6.1 till yesteray.
The solution I found was,
Use USPL (http://forum.xda-developers.com/showthread.php?t=311403&page=69)
Before you start USPL, be sure to remove SD card and SIM card from your phone and follow the procedure as in PDF there
Then flash whatever ROM you want to.
Hi guys,
I wanted to return to the original W.M 6.5 in order to install new Android NAND, so I formatted my SD card, placed the image and loaded the bootloader. Unfortunately, the installation was interrupted. After that when trying to repeat the procedure bootloader says "Upgrade ROM code error Please try again" . I am trying again, but the same thing happens over and over again. I tried installing it via USB connection, but it installs 1% and gives the same error "000028002 NOT ALLOW".
Does that mean that I have bricked my phone and if not, how am I to fix that and install what I wanted to install?
Message says it all. ROM code error.
Fliashing from SD will remove HSPL so you have no CID bypass.
ROM you are flashing is not matching your devices country ID so you need to find a ROM that is correct to flash via SD or flash via USB & flash a suitable HSPL first.
Before proceeding flashing, check ROM & radios are correct for your device as too many people are bricking their devices by silly mistakes these days.
Thank you!
My phone is an Orange bought form UK. I fount the required ROM (ver. 3.14), but the same thing happens again. I tried to find the original 1.72, but it cannot be foung anywhere. Any ideas?
Flash HSPL via USB then ROM via USB
I managed to install the stock ROM, now I am going to pick a nice NAND Adnroid.
Thanks for the help, much appreciated!