Database Users

HTC 3300 wrong ROM upgrade,,no display,,pls HELP

i have made a mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i have downloaded the correct rom version from T-Mobile but it doesnt seem to work
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz

as i said on the other post
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index..._Card_Flashing
hope it will work

i think you can get it from here
http://www.tm-phonedownloads.com/sd_compact3.html
if WM6 did not work.. try WM5

thanks i m downloading it...but tell me one thing if there is a software issue then why isnt ther any display i mean no backlight no display no charging led

having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"

i think that becuase the bootloader , ISP or one of these stuff are corrupted.. don't know.
and as i told once i got my artemis completely dead
and finally i got it fixed by putting the ARTEIMG.nbh in SD card as they said in the wiki and then by pressing the camera button and the power.
and it started flashing it as the SD card flashing but it took about 30 mins .. and there was three phases in the flashing progress which it was the first time i see.

having same problem with both WM5 and WM6 upgrades!!
"error occur : invalid update tool
this update cannot be used for your pda phone, please get newer update utility"
Click to expand...
Click to collapse
did you flashed it by SD card or RUU?
if you used RUU try by SD card flashing

did u get the same prob? i mean the phone seems to be dead? if so...there is a hope then
well...i used RUU simply downloaded it and tried to install by setup,,, dont know about card flashing but will try
where can i find that NBH file?
do u have that .NBH file?

you have to extract the file you using a program like winrar
there will be few files.. one of them is the nbh
that's how i got the nbh file.
and about the SD card flashing is here...
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing

Revert back to original ROM

Recieved a hermes last week and had problems with it not waking form standby and needing to do a softreset.
trird some custom roms to try and fix the problem but no joy, so have now got to return the phone, only problem is that I can not install the original Rom keeps stopping at 12%
is there a way
thanks
Derek

which method u r using for flashing rom ? SD Card method or active sync method ???

kashifmehmood said:
which method u r using for flashing rom ? SD Card method or active sync method ???
Click to expand...
Click to collapse
using active sync method on windows vista,
downloaded the Rom from orange web site have
also tried HTC Rom and that also stps at 12%
phone now has no gsm on boot up

If you can find the SHIPPED STOCK radio rom you may have the slightest chance of recovering the radio BUT it sounds like you have got a corrupted radio rom. This is generally a total brick. If you can't get the original rom on, you might be able to recook it without the radio rom using ROM Kosch. Should be able to find it here somewhere but if you have changed the SPL then you might have problems.

***HELP*** Stuck while updating then got image corrupt error now stuck on bootloader

In urgent help I was updating my herald to NEW Simply Everything 6.5.1 Build 23420 when the update got stuck on 28% and then got error image corrupt. my herald restarted in bootloader mode and since its been like this my IPL AND SPL ARE 4.17. Please someone help. i will be really thankfull to you guys if you can give me an easy way out. i really dont want to do the goldcard thing again as its really difficult to get other WM phone to write the security thing in the memory card. at the moment any rom well do i just sold my other phone and the same day this happen so i dont have any phone. please help

Have you got a Herald or a T-Mobile Wing? If you have a Wing, just go into bootloader and install the T-Mobile ROM. Seems to me like you didn't HardSPL before you tried to upgrade. If you have a Herald then I am not sure what to tell you to be honest:/

ebel said:
In urgent help I was updating my herald to NEW Simply Everything 6.5.1 Build 23420 when the update got stuck on 28% and then got error image corrupt. my herald restarted in bootloader mode and since its been like this my IPL AND SPL ARE 4.17. Please someone help. i will be really thankfull to you guys if you can give me an easy way out. i really dont want to do the goldcard thing again as its really difficult to get other WM phone to write the security thing in the memory card. at the moment any rom well do i just sold my other phone and the same day this happen so i dont have any phone. please help
Click to expand...
Click to collapse
You should be able to flash while being in that mode.
Connect the phone through USB, and try flashing again. Try flashing to a different ROM, if necessary.

Well i have a HTC P4350 so i guess it Herald. well and yes i didnt Hardspl it's my bad was just too happy that i could update to the coustomised roms that u briliant guys are making here, but i have flashed like so many roms wm 6.1 to now adays the latest wm 6.5.1. but this never really happened. yes i am able to start the RUU it checks the device the when i click update it goes to either 2% or 3% and thats it gives me the image corrupt error.

ebel said:
Well i have a HTC P4350 so i guess it Herald. well and yes i didnt Hardspl it's my bad was just too happy that i could update to the coustomised roms that u briliant guys are making here, but i have flashed like so many roms wm 6.1 to now adays the latest wm 6.5.1. but this never really happened. yes i am able to start the RUU it checks the device the when i click update it goes to either 2% or 3% and thats it gives me the image corrupt error.
Click to expand...
Click to collapse
Yea, it means that you're trying to flash a ROM that requires you to be HardSPLed and flashed through SD Card, since the .NBH file is too small to be flashed through PC.
Either HardSPL your phone and follow the instructions for flashing through SD, OR find another ROM that doesn't require you to flash through SD card.

i have tride many roms but they r doing the go to 1 or 2 percent and the device resets. i will be really thankfull if you can tell me which rom to use exactly

Error (262) for diamond2 wm 6.5

Hi,
Help me please just me and that happens to me the mistakes my God.... I had the original ROM version coming with my diamond2, put the upgrading and went well until the moment he arrived at 9% and restart the pda, re-install I think is normal, however the installation continued until k stopped in 18% and after a long time gave a notice of error (262) made the recovery as recommended and continues to give error ....
I do help me please

This just happened to me too
My phone was hardspl´d
It stuck at 18%, but no error message so far. Did you unplug your phone?

Read this:
http://forum.xda-developers.com/showthread.php?t=425913

I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.

Thank you very much fighter, will try that.

I had Official 6.1 Asia WWE installed, HARDSPLed. Tried to upgrade to 6.5 on my computer and my laptop, nothing worked. Both stops at 9%, disconnects, comes back and stucks at 18% again. Had to go back to 6.1, this time it worked to bring phone to life.
My phone was bought in Taiwan.
Guess I am out of luck

I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.

I had the same 262 error as well, screen went blank for a second at 9% and finally freezez at 18% with the error message. Heres what you need to do:
Update your HardSPL to 1.83
Flash 6.5 again
????
Profit!

Hello,
already did everything you say and nothing. I liked to tell me where I can get the former Rom wm6.1 because meeting.
help me please

duongla said:
I think the best way to upgrade is as follows:
1. Run the RUU_Topaz_S_HTC_WWE_2.16.405.4_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship.exe on your PC/laptop to extract and get the RUU-signed.nbh.
2. Copy the RUU-signed.nbh to topaz SD card and rename to topaimg.nbh
3. Upgrade new ROM from SD card.
Click to expand...
Click to collapse
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks

player911 said:
I'm not sure. Have you flashed other roms before? Perhaps you have a bad download. I know the servers are overloaded from all of us geeks sucking down the WM6.5 rom... perhaps its bad.
What I normally do is put the phone in bootloader mode first by holding VolDown, while resetting the phone. This will give windows time to install the proper drivers and get situated. Once done, try flashing again.
I think 262 is a connection error. Probably driver related since you said you ran your stock rom. But check your cable. Make sure its secure and reliable. Next try another USB slot. If nothing else try a different computer... sometimes PCs just will not cooperate.
Click to expand...
Click to collapse
How can u exit bootloader screen? Only by removing the battery or...?
Thanks!

I do not have with me the adapter card to do this
There is also a problem is that the pda now I do not go the menu with the three colors blue, green and red, until I have done a hardreset and nothing ....
at least I no longer ask the solution with the ROM 6.5 we only have as I had before ... and wanted my pda to work help me please

Little history for my friends with same problem here:
1. Bought Diamond in Taiwan with Chinese;
2. HARDSPL 1.33;
3. Install Asia WWE 6.1 ROM;
4. Try update Official WWE 6.5 ROM, no luck, remove battery and put back;
5. Reinstall Asia WWE 6.1 ROM, everything back to normal;
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too

Hello,
I already installed the previous ROM with the 6.1 and everything was normal.
I tried to install again the OFFICIAL ROM 6.5 and the problem remains back to the error at 9% and 18% for the progress bar giving an error (262).
not understand some things as:
6. Update HARDSPL 1.83; Ask brother to donate
7. Install Duttys ROM or Official ROM works too
is there any solution?
can help me

Sorry:
1. install Hard-SPL 1.83.OliNex (http://forum.xda-developers.com/showthread.php?t=520312)
2. install 6.5 ROM or Cooked Rom.
It resets 9% again in Official ROM, but reconnects and go to 100% (no stop 18% again).
Dutty ROM no stop at 9% or 18%.

problem solved
thanks for the great help amazing
thank you very much

hello
the memory card is not me out with the official wm 6.5 ROM
what can I do to boot the card?? I have a diamond2
ah no problem of card pk started the card with the adapter to the PC and read it perfectly.
pesquisar

AntonyWatson said:
Would you be so kind as to enlighten me/us on how to extract the nbh file from the executable file.
Thanks
Click to expand...
Click to collapse
When you run the RUU, the RUU-signed.nbh will be extract temporarily to a folder in driver C:
(For me: C:\Users\Duongla\AppData\Local\Temp\pft51D9.tmp)
Just do a search and you'll find it.
And remember to HSPL to 1.83.

i have the same problem too
hello
i have a diamond 2
ihave olinex 1.83 from here http://forum.xda-developers.com/showthread.php?t=520312 and i can not install ANY wm6.5 rom!!! on the other hand EVERY 6.1 rom i have trie (5 different greek and english) work perfect?!?!??
any suggestions?
thanks

i had the same issue
i was running 6.1 (stock rom) which was hard spl'd
i had the same error kept going to 262 and haviong to be recovered
so i re hard spl'd with the latest one, and it worked fine after that,

Can not install offical 6.5 from HTC

Hi
I just bought a used Diamond 2 and wanted to update it to 6.5.
But when i try it stops for at 9% and then looses connection with the PC but recovers and continues to 18% then it stops and the RUU wants to recover the installation, that resulted in the same error.
Luckely I tried the offical 6.1 installation, and that installd OK so my phone is OK.
But why can´t I install 6.5?
I checked with the guy i bought it from, and he said it has been flashed before with a dutty or tom´s rom.
Can this be why it wont load?
I check the bootloader screen (thanks to Drag-On guide) and i says SPL-1.33. OliNex MicroP-Topaz (LED) v10
Do I need 1.83 to install offical 6.5?
I am using swedish rom since I am swedish.
Can anyone help me?
/ Bidde

Try hard spl 1.83, then try re-flashing your 6.5
If it still won't flash, try a different rom. Download a cooked rom, Tess 4.0 for instance, and see if you can flash it. If you can, there is probably an error with the original rom. Tess is close to stock anyway, but faster and better

He he!
It worked! Thanks alot!
So now when I have done that, I will try to install a rom.
/ Bidde

yeah try hard spl 1.83 1st and then u'll be able to flash wm 6.5.
that's the only wayt to do it, otherwise it'll remain stuck at 18% everytime u try to flash the new rom

i have same problem now.
Please, where did you find offical 6.1 installation?
Could you pm link please.
I found on the http://wiki.xda-developers.com/index.php?pagename=Topaz_ROMs_Shipped my previosly ROM and recovered phone
Uh

The 6.1 I just downloaded it from the www.htc.com site.
Under the support you will find youre phone

exactly likeme ,, try to remove memory card