Related
I have I-mate , and updated to ver 1.52 , i try to connect it with the BMW car bluetooth , they can see each other but the car can not bound the i-mate , any body try this , or is there a patch tor that.
any help
I'd like to...if anyone has a BMW 520i to donate i'll be willing to have a go!!
Sorry i couldn't be more helpful....i just couldn't resist.
Yes There is a solution Ali!!
First backup your device
Goto www.clubimate.com
Register Your device
Then you would head to the support section
And download the latest ROM upgrade which is approximately 40 MB
Upgrade your device since the new ROM is said to have a new fix for bluetooth.
And if this works ........ Please Donate !! (Just kidding !!)
if i am not mistaken, the bmw carkit is the same as the parrot ck3000...if so you have a problem (for the moment anyway)
the parrot ck3000 works with the handsfree profile of a bluetooth phone, and the xda2,qtek2020,i-mate and all the other names for our machine only works the headset-profile....it is no use of trying to upgrade the carkit, mine has the latest software, and still does not work...the upgrade has to come from your pda, that has to support the handsfree profile...as i heard, there should be one comming out in the first few months...let's hope...
thanks for the help
i update the i-mate before from the clubimate but as you said no help at all it is the same problem
if problem solved will donate sample bmw logo from the company
To ali:
Simply: NO WAY. Nor will BMW support you in any way: You will not get (in written) even the list of supported phones. They just claim it's lack of Bluetooth standardization (Wich is not completly false...).
BTW, I've found the hard way that BMW cars only support Handsfree profile (No headset), BUT, not on every phone model, and not all features....
If you are interested:
1- Ericsson and Sony-Ericsson T68 models: They work on the handsfree part of the Bonding, but you will not get your phone contact list automatically passed onto the car kit phone system. You may pass contacts one at a time (tedious and time consumming).
2- SE P800: My biggest disappointement, they do not even pair reliably, no contact list at all, connection breaks with no apparent reason.
3- Siemens S-55: The BMW preferred one (Both Germans, I guess....), to no avail. Same behaviour as SE T68, and although the contact list is supposed to be passed automatically it doesn't. When tried manually, it stops at about 6 or 7 contacts and the phone hangs.
4- XDAII: The BT part is SO POORLY implemented, it should have been even removed from the reviews on the forums.
Recently bought this carstereo, as it got bluetooth buildt in. The combination with S200 works allmost excelent, but for two things.
What it does: It works well as a handsfree set, it mutes the sound, shows the number in the display, and the remote control either accept or reject the call. What it does'nt do (and the manual warns about this, I was aware of this before I bought it): It won't sync the phonebook. Either can I beam single contacts.
Anyone here tried this combination and had better luck than me? Any good advice?
HPN
I have the JAMin with this head unit. Exactly the same experience as you. I also have two other things I'd like to change or find a solution for:
1. Although auto-connect is on, I have to connect manually (the manual warns of this). I wonder if there's some way of automating this or at least making it one click form either the pda or the head unit.
2. Pressing and holding 'band' triggers VoiceCommander on my PDA but I can't give commands. It seems that the audio form the car's mic is not fed through to the pda. Any ideas?
Regards
I have the same problems and i don't find any solution
Anyone have any luck resolving these problems? I'm looking into a Pioneer DEH-9800bt and want to transfer my phonebook, as well as use voice commander.
Using Jetware you'll solve all your probs.
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Yep, got exactly the same on my BMW 630....
Can t find any tweak but....
I am a heavy email user (thru BlackBerry connect) and I noticed that
the higher the number of messages stored, the higher disconnections appears.
At the same time, the TyTn is slower and slower....so my idea that this is related to some timeouts somewhere....
For your complete info, the MS bluetooth stack in my previuos S100 have able to.....immobilize my 630 !!!!!!!!! yes, incredible...
The MS stack messed up with the BMW bt ...and this later would stay ON for ever...even after switching car s power off.
This was sucking the car s battery untill the car would start !...
BMW could not reset the BT module unless disconnecting battery....but...then the active steering had to be re adjusted with the proper BMW computer...
This is a real story.
johnmclean said:
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Click to expand...
Click to collapse
I have the same problem with a CK3100 kit, don't have a solution, but would like one, didn't have this problem with a Jasjar nor Wizard
TyTN bluetooth | random disconnect when using car handsfree - more details
Thanks for the replies so far.
Although the following thread did not help me with my problem, it might help one of you. If you're having problems mostly related to issuing voice commands using M$ VoiceCommander, I think there *might* be a solution in that other thread for you.
Just to reiterate my problem; my TyTN keeps randomly connecting and disconnecting from my car's built-in hands free bluetooth device.
There was a time when if i managed to made a call after first starting the car - before the first random disconnect - the phone would remain connected until the next time I started the car. That no longer appears to be the case.
-jm
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Has anyone tried a ROM with aku 3.3?
jasonrhcastle said:
Has anyone tried a ROM with aku 3.3?
Click to expand...
Click to collapse
Yes.
And on my CK3100 I now no longer get disconnects. I did have to uninstall jetware as it wasn't reliable. My TyTN now connects perfectly and no longer drops.
One thing I did find is that the TyTN hates it when more than one handsfree device is in its trusted list. Make sure that the ck3100 is the only handsfree device paired.
http://forum.xda-developers.com/showthread.php?t=247520&highlight=bluetooth+keeps+disconnecting
ajax007 said:
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Click to expand...
Click to collapse
I've tried changing the automatic switch off setting and it made no difference on my SPV M3100 (with Parrot CK3100) - I reckon that the external power is what fixed your problem (this has worked for others too).
Sadly it's not a convenient fix as I like to leave my phone in my pocket when I'm in and out of the car. Orange say there is no 'issue' so there's no sign of a ROM update but HTC know of the problem but I have to wait for Orange to release their ROM update. I can't use the HTC update. If only us Orange users could tell them enough times they might listen now that some AKU 3.3s are being released. Orange technical department won't speak to end users like me - they have actually refused to discuss it with me and just pass messages back and forth from customer relations. Any other ideas?
A solution - thanks to Parrot
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
587dan said:
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
Click to expand...
Click to collapse
If you use the Jetware BT software you can do the same thing e.g. beam the whole contact list in one go and then set the Parrot to not sync by choosing the Ericsson No Sync profile. This is how I have mine set up, also with the Jetware software it sends over the Service Provider, Battery and Signal strength settings to the Parrot, something which the native stack doesnt do.
Solution for this
Hey all, i have purchased a parrot 3100, the software in it was 1.6, i had the same problems but it's greatly and successfully solved using the new jetware 1.3 . i don't know if i can post some linx here, but here you go, if this is illegal for this site please remove them
http://rapidshare.com/files/30296941/JetWare_1.3.rar
http://www.megaupload.com/?d=PL5UX5KC
Hi,
I have a HTC Touch 3G:
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car (Passat 2008) kit cannot connect to the phone for some reason.
Is there any solution for this subject?
Regards,
SpiderXman
I believe, you have to turn on the rSAP-Profile in the BT section of your Jade.
The VW vehicles have a BT-Unit, that only works with mobiles, that have the rSAP (remote SIM Access-Profile) enabled.
You know, how to enable it ?
Start-->Settings--> Bluetooth --> SIM Access
Hope this helps.
Greetings from Cologne,
Arniebirdy
Thanks for your help,
However I have done this procedure without success.
SpiderXman
Emanuel Ferreira said:
Hi,
I have a HTC Touch 3G:
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car (Passat 2008) kit cannot connect to the phone for some reason.
Is there any solution for this subject?
Regards,
SpiderXman
Click to expand...
Click to collapse
Hi/ I have the same problem with BMW X5 2004. paring is OK, but it dosn't work. it looks like connect and then disconnect (on phone screen headset icon appear and disappear). SIM access anable but no sucses
With touch 3452 it was not a problem. HTC support team told me that it is a conflict with BT kit on BMW. Now I see not only.... What to do???????
For most of the things discused here no one has paid.
For the things people have paided for go to the garage, i know i would!
Tom Lenferink said:
For most of the things discused here no one has paid.
For the things people have paided for go to the garage, i know i would!
Click to expand...
Click to collapse
You know you can, but how to resolve this issue ???? I think any payment can't, can it?
Hi,
using Jade's BT SAP with BMW 3 series (E91).
Works like a charm, except one issue: names in BMW phonebook appear sorted by first name.
In Jade its sorted - as it should be - by last names.
No solution found until now.
Anybody an idea?
Thanks
@ConsultantR
Try this for older BT Kits: http://www.jetwaremobile.com/
ConsultantR said:
Hi/ I have the same problem with BMW X5 2004. paring is OK, but it dosn't work. it looks like connect and then disconnect (on phone screen headset icon appear and disappear). SIM access anable but no sucses
With touch 3452 it was not a problem. HTC support team told me that it is a conflict with BT kit on BMW. Now I see not only.... What to do???????
Click to expand...
Click to collapse
Hi there,
I have a similar problem with my Volvo S40 2009. My Jade and the car connects each other but every 15-30 seconds the connection cuts off. It is very annoying while talking to someone, just in the middle of the conversation the radio starts to run again, since Jade loses connection to the car.
Is this some kind of configuration or setup issue? Any help?
I had this on / off problem too.
It was a fault in the phonebook contacts (some signs are obviouly not allowed in this bluetooth stuff (e.g. / or ")
So i moved all contacts to a folder, that wasn´t synchronised and that worked fine. Afterwards i added this removed contacts back step by step and was able to identify the problematic ones.
The easy way instead is to set up the phonebook to SIM only and copy the most used contacts to the SIM
Regards Quirlsen
Quirlsen said:
I had this on / off problem too.
It was a fault in the phonebook contacts (some signs are obviouly not allowed in this bluetooth stuff (e.g. / or ")
So i moved all contacts to a folder, that wasn´t synchronised and that worked fine. Afterwards i added this removed contacts back step by step and was able to identify the problematic ones.
The easy way instead is to set up the phonebook to SIM only and copy the most used contacts to the SIM
Regards Quirlsen
Click to expand...
Click to collapse
Thanks for the hint Quirlsen. Is it only the Name and Surname lines, which I have to correct? Otherwise it would be impossible, since I also have the Windows Live(Msn Messenger) contacts in the Contact List.
By the way is there a way to remove those Msn Messenger Contacts from the phonebook? They just popped up after I logged in once to Windows Live.
To be honest, i don´t know.
I´ve exported my whole contact list to csv, cleand it up with Control+H and imported it back (i had to add all picvtures afterwards
Your Win Live prob you could solve by defining different phonebooks for sync with phone and other stuff.
I can connect the HD2 to my new MINI with bluetooth carkit fine via headset profile.
However, the phonebook does not sync with the car.
Ir worked fine with the HD with the Microsoft bluetooth-stack.
Is there any solution for that?
bill340 said:
I can connect the HD2 to my new MINI with bluetooth carkit fine via headset profile.
However, the phonebook does not sync with the car.
Ir worked fine with the HD with the Microsoft bluetooth-stack.
Is there any solution for that?
Click to expand...
Click to collapse
With TouchHD i did sync Phonebook to my nissan car without problems (winmobile 6.1)
I think this program will work on HD2 also (winmobile 6.5)
http://www.handango.com/catalog/ProductDetails.jsp?productId=183981&platformId=30
regards nico
No, that does not help.
With this app you can only send contacts and so on to another device.
But here, everytime you connect the device via bluetooth with the car, the car should read the contacts from the phone.
That worked without problems with the microsoft-stack.
I am having a similar issue, paired phone with Mercedes HFP and first time contacts came across. Next time back in the car and it reconnects, the contact memory is empty? Can still make and receive calls but no contacts. If I re-pair the phone by resetting HFP in car then contacts come across? Software issue on phone or car kit driver issue? Previously had HTC S710 and had no problems. Very annoying so any help would be appreciated.
Thanks
Same here - I even ca`nnot get the car be paired with HD2 - why ?
Hello,
here is my issue with the BT connection: I have a Pioneer F900BT unit in my car. With my previous Nokia E66 everything worked just fine.
Now, when connecting with HD2, connection works ok, phonebook is downloaded ok, BUT: when there is a call, the music in the car is not silenced automatically; what's worse, it seems the phone doesn't send any call identification to the headunit, since all the history (outgoing, incoming calls) is empty. So, I cannot redial or see who's calling me.
I did try the fix in the registry described on another thread (setting HKLM\Software\Microsoft\Bluetooth\sys\COD=5374476, but it doesn't help.
Any idea?
Thank you.
It works perfectly with my Mercedes Command with Bluetooth Adapter, it does not transfer all of my 800 contacts because it use to make a new entry for each tel. number (Home / Works, etc.) therefore it says "memory full" at about 75% but I can understand. At least I can call/recognize up to the "S" beginning contacts.
Anyhow, since I used to have this problem in the past, you could try Jetware, it worked for me with my Cruise.
dfulgo said:
It works perfectly with my Mercedes Command with Bluetooth Adapter, it does not transfer all of my 800 contacts because it use to make a new entry for each tel. number (Home / Works, etc.) therefore it says "memory full" at about 75% but I can understand. At least I can call/recognize up to the "S" beginning contacts.
Anyhow, since I used to have this problem in the past, you could try Jetware, it worked for me with my Cruise.
Click to expand...
Click to collapse
Jetware unfortunatly does not work with the widcomm-stack used in the HD2.
jma050 said:
I am having a similar issue, paired phone with Mercedes HFP and first time contacts came across. Next time back in the car and it reconnects, the contact memory is empty? Can still make and receive calls but no contacts. If I re-pair the phone by resetting HFP in car then contacts come across? Software issue on phone or car kit driver issue? Previously had HTC S710 and had no problems. Very annoying so any help would be appreciated.
Thanks
Click to expand...
Click to collapse
To follow up, I have found that its the pin lock (mentioned in another thread) that is causing the problem. If you unlock your phone before you pair up then contacts are coming across every time. May not work for everyone if their problem is different but has for me so wanted to share. If anyone knows how to bypass security issue with paired device I would like to know but as a workaround its better than no contacts!
I have this problem with my BMW iDrive too. No problems getting the address data on the HD but not working for me on the HD2. Can pair and make calls though. Any solution?
phonebook does not sync
I have a BMW with the bluetooth feature. From what I have noticed there is a connection started to the phonebook and it starts sending (and receving some) information but after about 110k it stoppes and the phonebook is disconnected. I would be happy to assist in any further analysis if anybody has any ideas.
I have no problem making and receiving calls in through this setup, but, as stated, the connection to the phonebook is not possbile. This was previously possible throgh the HD
//Awi
aszotten said:
I have a BMW with the bluetooth feature. From what I have noticed there is a connection started to the phonebook and it starts sending (and receving some) information but after about 110k it stoppes and the phonebook is disconnected. I would be happy to assist in any further analysis if anybody has any ideas.
I have no problem making and receiving calls in through this setup, but, as stated, the connection to the phonebook is not possbile. This was previously possible throgh the HD
//Awi
Click to expand...
Click to collapse
read my previous reply, its because your phone is locked whn it connects. If you unlock it before you pair up it should work.
jma050 said:
read my previous reply, its because your phone is locked whn it connects. If you unlock it before you pair up it should work.
Click to expand...
Click to collapse
OK. I tried to just unlock it, but this did not work. I will try to unpair, then unlock and then pair again, and see if this then works.
//Awi
Did not work ...
aszotten said:
OK. I tried to just unlock it, but this did not work. I will try to unpair, then unlock and then pair again, and see if this then works.
//Awi
Click to expand...
Click to collapse
Well, unfortunately it did not work. I unpaired the phone from the carkit, then removed the pin on the phone, did a soft reset, paired the phone with the carkit and saw that it started communicating with the phone book, but the communication stopped after about 110kb, as it usually does, and the phonebook was then disconnected.
Any ideas anyone?
//Awi
Same issue
I'm facing the same issue... New Mercedes, phone calls are no problem but phonebook is not accessible... I doubt that it's a lock issue... When I paired it it also didn't work but there it was certainly unlocked...
jma050 said:
To follow up, I have found that its the pin lock (mentioned in another thread) that is causing the problem. If you unlock your phone before you pair up then contacts are coming across every time. May not work for everyone if their problem is different but has for me so wanted to share. If anyone knows how to bypass security issue with paired device I would like to know but as a workaround its better than no contacts!
Click to expand...
Click to collapse
can you please direct me in the right direction...what are you refering to here?
please help