Related
Does anyone here use their MS Mobile 2003 “smart” phone with a Bluetooth car kit?
I wonder if you can help me…
With my old Nokia phone, it used to activate the connection to the car kit when I turned on the engine.
However, on the MDA Compact, I have to go to Bluetooth, select the car kit, and select “Set as Hands-free” every time I get into the car, witch is rather annoying.
Does anyone know how to make this automatic? Is there a third party utility perhaps that would monitor the availability of the car kit every so often, and connect to it automatically when it is available?
And another question, does anyone know of a good utility for voice dialling?
I tried Microsoft Voice Command 1.5, it is alright, more or less (apart from awful recognition of spoken numbers, even if spoken by upper class English people) it does recognise the contact names, witch is all that I need - however, I cannot get it to react when I press the action button on the car kit.
I still have to take the phone out of my briefcase, and hold it in my hand, witch is illegal whilst driving.
My dream application, would be something basic, that I can train for certain contacts that I call regularly (like with my old nokia phone, which appeal glows by the minute) – as this way, thick eastern European accents do not matter ;-)
Thanks in advance for any pointers!
I have the MDA Compact Working with the CK7W form Nokia.
Works good exept the voice dailing, You can thakeand disconnect a call with the remote controle.
But do you have to manualy connect to the car kit every time you get into the car?
Once it is connected, I can accept and end calls using the action button. so that is not a problem
No just hold the center button of the remote for 2 seconds, than it will connetct again
tbouman said:
I have the MDA Compact Working with the CK7W form Nokia.
Works good exept the voice dailing, You can thakeand disconnect a call with the remote controle.
Click to expand...
Click to collapse
Hold on a minute, I have the same Nokia car kit, and my Compact when connected suffers badly with reported echoes at their end, not mine.
Do you have this problem?
I was to believe that this was a common problem not resolved yet!
Mike.
I'm gonna test this tomorrow in my shop, I will place a list with phones(other than Nokia) that will work with the CK7W[/quote]
My car kit is CK-1W
I am generaly happy with it, apart from the fact that on the MDA I have to manualy connect every time I get into the car.
I used it with many different phones, and it works fine.
so I think that it is the bluetooth manager of the MDA that is to blame.
my compaq Ipaw bluetooth manager was the best!
but this one, I cannot even get the activesync to work...
For the manual connect you have 2 blame the BT manager in w2003se.
I have good results with:
Nokia CK7W:
Qtek 9090
Qtek S100
Sony Ericsson P910(I)
Sony Ericsson P700i
Samsung D500
HP6340
Are there alternative bluetooth managers?
or a reg. hack I can implement?
thanks
Hmmm, I Don't know...Anyone?
Apparently not…
I had the same problems with my mr handsfree genius car kit, and i thought it was the fault of the car kit.
Just upgrade your rom to 1.06 and all your problems will disappear most likely.
Which rom do you have?
Andre
I have an old ROM.
however, all my atempts at upgrading it failed.
my device ID is something like TMOB-005, not 001
cracked update exe file did not help, running the scripts to modify the ROM files did not help...
in the end I felt inept, and gave up ;-)
I was wondering if anybody here had the same combination and wanted to share the experiences.
My only problem is that the steering wheel button that is used to make, answer and end a call doesn’t support the press and hold option for activating the voice dial.
Wanted to know whether there is workaround for this.
Thnx
No1?
being an off-road vehicle, have you found a good solid holder for the universal for when you are on steep inclines or bumpy fields?
Re: BMW X3 with BMW BlueTooth+JasJar? (or any other BMW with
zormic said:
I was wondering if anybody here had the same combination and wanted to share the experiences.
My only problem is that the steering wheel button that is used to make, answer and end a call doesn’t support the press and hold option for activating the voice dial.
Wanted to know whether there is workaround for this.
Thnx
Click to expand...
Click to collapse
I also have a problem with getting the voice dial to work on my 320d (new E90 shape).
I have not been able to synchronise my phonebook from my JASJAR to my car. Do I need to copy the entries to my SIM to get that to work?
Thanks
joebongo said:
being an off-road vehicle, have you found a good solid holder for the universal for when you are on steep inclines or bumpy fields?
Click to expand...
Click to collapse
Yes, I have found it, leather case on my belt or in my pocket… :wink:
Re: BMW X3 with BMW BlueTooth+JasJar? (or any other BMW with
ChristelleJvR said:
zormic said:
I was wondering if anybody here had the same combination and wanted to share the experiences.
My only problem is that the steering wheel button that is used to make, answer and end a call doesn’t support the press and hold option for activating the voice dial.
Wanted to know whether there is workaround for this.
Thnx
Click to expand...
Click to collapse
I also have a problem with getting the voice dial to work on my 320d (new E90 shape).
I have not been able to synchronise my phonebook from my JASJAR to my car. Do I need to copy the entries to my SIM to get that to work?
Thanks
Click to expand...
Click to collapse
I tried copying the entries to my SIM card but it didn’t result with syncing phonebook with the car.
About voice dial on the steering wheel, well, what is puzzling me is the fact that the button works perfectly as VOICE DIAL/CONNECT/DISCONNECT/REDIAL button on most of the Nokias that I tried to pair with BMW. :x
I am using Nokia’s BT headset HDW-3 with my JJ and it has only one button for operating the phone with different PRESS/PRESS&HOLD/DOUBLE PRESS combinations and it initiates the voice dial without any problems with PRESS&HOLD.
I repeat the button on steering wheel is behaving like that with Nokia telephones (the same thing PRESS&HOLD) but with not with JJ. It just redials or disconnects active conversation. :?
Is it the same on yours?
Lets invite others to share experience with other cars… although BMW BT is very challenging for every mobile phone, it is very unfriendly…
Re: BMW X3 with BMW BlueTooth+JasJar? (or any other BMW with
[quote="zormic]I repeat the button on steering wheel is behaving like that with Nokia telephones (the same thing PRESS&HOLD) but with not with JJ. It just redials or disconnects active conversation. :?
Is it the same on yours?
Lets invite others to share experience with other cars… although BMW BT is very challenging for every mobile phone, it is very unfriendly…[/quote]
I have not tried it with other phones, but it behaves the same way with my JJ. I started thinking it was because I'm blonde...
Update: (maybe it will be useful to someone)
After updating JJ with latest i-mate ROM the cars BT is able to read the phonebook from JJ. It can read both from the SIM card as well as from telephone memory.
Unfortunately, the issue with voice dial button persists...
I am also having trouble using my BT headset to voice dial (not car related).
See post: http://forum.xda-developers.com/viewtopic.php?t=50138
/Mad
The same thing here and it is definitely the problem of new ROM. Before that my headset speed dialing from my Jabra 800 was flawless...
You win some, you lose some with Win mobile updates...
I have simialr issue with my Audi A4 with in built BT device, the voice dial is particularly sh1t, and activates at the end of voice calls
Tried a number of different ROMs and the experience is the same :x
Lord Buckingham said:
I have simialr issue with my Audi A4 with in built BT device, the voice dial is particularly sh1t, and activates at the end of voice calls
Tried a number of different ROMs and the experience is the same :x
Click to expand...
Click to collapse
I can direct you to this forum where there is a person claiming that after update of ROM hi Audi has all the functions. Check it out...
http://www.x3world.com/bluetooth/57...es-phonebook-transfer-2.html?highlight=jasjar
you may also find this thread usefull....
http://forum.xda-developers.com/viewtopic.php?t=48916
I work for a BMW dealer but havent tried pairing my Wizard...will try it on my bosses new 330i.
also the bmw page that confirms the divices tried and tested by BMW to work with their cars....as you will see, no latest phones...and no WM phones.
still, some phones do work, but dont allow phone book transfer to the car...others dont work at all....
and incase anyone was wondering, BMW's do not support bluetooth stereo...so we cant beam music from the phone to the car
please ask any questions...i will try and answer them.
minty1978 said:
you may also find this thread usefull....
http://forum.xda-developers.com/viewtopic.php?t=48916
I work for a BMW dealer but havent tried pairing my Wizard...will try it on my bosses new 330i.
also the bmw page that confirms the divices tried and tested by BMW to work with their cars....as you will see, no latest phones...and no WM phones.
still, some phones do work, but dont allow phone book transfer to the car...others dont work at all....
and incase anyone was wondering, BMW's do not support bluetooth stereo...so we cant beam music from the phone to the car
please ask any questions...i will try and answer them.
Click to expand...
Click to collapse
I have X5 with BT and HTC Wizard and having problem to even pairing it.
Can you, please let me know you results of trying to pair your Wizard with your boss's bmw?
After playing around some days (and yes: i read through a lot of threats) i think that this problem (using a bluetooth headset to activate ms voicecommand for dialing and so on) is not only bugging me but a lot of others.
Thats why I want to start ANOTHER, more structured thread about this topic. If something is wrong, please correct me!
WANTED SOLUTION:
Most of you want to use voicecommand activated via a bluetooth device... in your car beside TomTom for example.
PREPARATION: Headset working
I assume that you already got your device working. For myself, I am testing with Supertooth II and a Nokia BH200 hands-free device.
PROBLEM 1: TRIGGERING
First off all, voicecommand needs to be "started" when you press a button on the headset. Usually, the application "windows/sddialer.exe" is launched when bluetooth gets a "voicecommand"-commando.
(Some headsets got their own button, some wants kinda double-click, others want their button hold for some seconds to do so...)
This problem can be solved by changing a key in the registry:
Code:
HKEY_LOCAL_MACHINE/Software/OEM/VoiceCommand/
..Then change the path value to:
\Program Files\Voice Command\voicecmd.exe
(or whereever you installed your voicecommand exe-file!)
Okay. Now the right application is launched when tapping on your bluetooth headset. But here you may encounter the next problem: It works only once.
PROBLEM 2: IT WORKS ONLY ONCE
That problem seems to be caused by voicecommand, because the gateway is left open after useage. (I have no idea if this is correct - i am just citing the opinion of some threads)
There are some attempts to solve this:
Darryl Burlings "Voice Enable": http://www.burling.co.nz/downloads.aspx
Project VCABT http://forum.xda-developers.com/viewtopic.php?t=23558&highlight=vcabt
VCBTFixer0.01.
JETware Hands-free Extension for Windows Mobile phones
http://www.jetwaremobile.com/
I tried them all and for me (german T-Mobile Rom 2.21) only Jetware's Tool worked. A reason MAY be that some of the hacks (vcabt, VoiceEnable,VCBTFixer0.01.zip) only work with an english ROM where all paths are correct: /programs and not /programme)
PROBLEM 3: Correct Audiotransfer
Some users report that it seems like there is still Wizards microphone in use - and NOT the one of the bluetooth device. Others again claim that voicecommands "answer" isnt delivered back to the headset but speaken via Wizards speakers... Since I used Jetwares Tool i didnt had that problem.
PROBLEM 4: Recognition Quality
Lets say you got somehow the correct and everlasting triggering of voicecommand via bluetooth working... then you may find out that recognition ends up with very poor quality.
Here a question for the "pros" in here: Could it be possible that this problem is related to poor bitrates in the audiotransmission via bluetooth? Could we increase recognition quality by tweaking that bitrate? Or will that end up with another problems (bt-bandwidth, cpupower while coding/encoding)?
PROBLEM 5: Interfering with other applications
Thats a future question... When everything works well with voicecommand - then you maybe want to use it in your car to have your hands free. And what else do most of us have there too? TomTom (or another navigation tool)!
So how will that work together with your voicecommand/bluetooth environment? Will TomTom "speak" via your headset too? Will the bluetooth gps mouse keep on working without problems?
And last but not least: Will you still be able to use your phone as a "phone" then?
Please share your ideas about theese problems... and if anyone got everything up and running (Voicecommand & Bluetooth, TomTom / GPS) it would be *very* appreciated if you could post a well written Tutorial / Howto
Regards, Licht
Good luck - for what its worth it works fine with certain BT headsets like the Moto HS850. Just the reg key does it.
Only thing is you have to hit the button on the BT headset 2-3 times sometimes to get it to work but it works perfectly otherwise.
Would LOVE to have a fix that would let me use with all headsets.
How does the jetware stuff work? I heard it screws up some other things?
Cause of "works only once" problem discovered?
I've gone through 4 different headsets with my Wizard and I found at least one commonality to which ones suffered the "works only once" problem:
All of the ones that had this problem were BT 2.0 headsets. The ones that worked fine were all BT 1.x headsets.
I also verified that on my new TyTN (which natively support BT 2.0) the BT 2.0 headsets worked correctly (no "works only once").
Not that this is any consolation to anyone with a BT 2.0 headset and a Wizard, but might help those looking for a new headset.
Changed over to Tytn... works perfectly without any hacks
here's my FWIW answer:
After extensive reading here and at Hofo, I settled on a Plantronics 510. Installed Burlings app and it worked. I hold the button to turn on VC (it will also wake the device from standby if its sleeping, even if its locked) and say my command. It will reply through the headset speaker. After that all audio is oing through my BT headset. (If you have VC telling you who's calling and telling you your appointments thats pretty nice, but if the phone rings you might need some new underwear)
Another long push of the headset button return audio to teh MDA's speakers. If I need to use VC again, I start all over. It sounds more complicated thatn it is in reality.
Recognition is so-so. I don't really use it in my pickup (its hot so my windows are down most of the time), but its pretty good in my car. I have to repeat myself maybe 10% of the time, at most.
Not sure how well written that was, sorry. if anyone has any questions I'd be glad to answer them. I've been pretty pleased with the combo. Especially since I got the 510 for $40 from amazon.
Hi all,
I am unable to pair my XV6800 to my Pioneer DEH-P980BT car stereo. The phone detects the stereo and requests the PIN, but fails after I enter the PIN with a 'Cannot Connect, connection failed or pin is wrong' error. I have used this stereo with my xv6600 Blue Angel for over a year (Can you say Widcomm stack?).
Anyway, I have been unable to come up with fruitful answers or even a next good step by searching the forums or general internet searching. I am wondering if there is some kind of Bluetooth tool that would allow me to determine what actual error is occurring?
Any help would be greatly appreciated.
I had the exact same problem with the same head unit. Here's what I did to correct it:
Code:
The vario II identifies itself as a PDA bluetooth device. The pioneer modules are searching
for a phone or smartphone, so it just ignores the Vario II.
Solutions:
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone, and my pioneer unit finds it without problems.
That SHOULD work for you. Please let me know if does, because when I do it, the stereo finds the handset fine, but I can't hear any conversation coming out the speakers. It's like it is on permanent mute. This also happens with my BT headset - all controls work, but I can't hear anything nor can people hear me. Plus, my Mogul's speaker cracks and pops when I try using it with another BT device. I think it may be a bad unit. I want to know if you have better luck with the Mogul and 980BT.
I am using the newest ROM (2.17) and radio. The same thing happens to me with the older 2.09 ROM also.
sup191
Eureka!
It worked! I had tried this COD change before and had tried initiating pairing from the stereo, but had not tried both at the same time. I am able to connect the phone and bluetooth stereo simultaneously, and both are working with excellent sound quality. That's leap and bounds from where I was yesterday. Thank you very much!
Regarding your problems, I am not experiencing them at all. I can hear both sides of a conversation as can the other side. As it stands I think I will have to manually pair every time I get in the car (a pain, but I will work on it).
I am not sure what differences exists between the Hermes and Titan, but I would be happy to investigate for you wherever I can. My ROM is version 2.09 and my radio is version 1.30.
Thanks again. Feel free to post or PM me if I can help you figure your issues out.
Thanks for the offer to help. I think my first step is going to Sprint and showing them that BT is crap on my Mogul and see if they'll swap it for me. I'm also going to try pairing my headset there on the demo and see if it works. If it does, my unit it broken. I'll let ya know what happens.
sup191
I have a problem where my HD2 does not work properly with my Land Rover Freelander 2 in-built bluetooth car kit.
The HD2 pairs with the car and I can search my phone book, see my last dialled number, I can even dial a number, BUT, the phone does not connect properly - the car radio should cut out and phone audio come through the car speakers, but instead the radio just continues to play. And shortly after the call is connected to the other party the line is terminated.
My Nokia phone works perfectly with my car, but this phone does not. Even my Sony Ericsson Xperia X1 did not for properly with the Freelander 2.
I did manage to make one successful call, but after I stopped and restarted the car, the problem returned!! Arghhhhhhhhhhhhhhh!
So, does any one know of a fix? Surely hands free/car kit is a standard?
Help!
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Paired it with my Pioneer FH-P80BT on my way to sell my 3GS and recieved a call. Got the same issue as described above - just a bug i presume.
I'm experiancing similar problems. All works fine (incoming call's or outgoing call's) but they get disconnected randomly it seems. I'm using a JVX NX7000 by the way. No problem with my iPhone. Hope they fix it soon!
I tested it with my BMW Idrive last night which is notoriously difficult and it worked fine, I was really surprised tbh! But was able to recieve and make calls, the stereo cut out and could see the phone book too. With my N82 i was only ever able to make/receive calls.
Same problem - Jaguar XF - it docks ok but I have to initiate calls from car (vs phone). Just some weirdness going on...
glenner05 said:
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Click to expand...
Click to collapse
Mercedes brutality
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
I have a Nissan Pathfinder; it paired ok, and dials from the Pathy without probs. Ringtone is ok too. Sound quality seems better than my old Tytn so all in all v happy.
Doesn't stream music, but that's Nissan's fault, not HTC.
Works fine with the Ford BT system in the Ford Focus (2009).
HTC HD2 Pairing with a Freelander 2 - SUCESS!!!
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Hello i have same problem with my BMW X5. Can you explain better your steps ?
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Interesting, I have a similar problem with my 2009 BMW 3 I explain here (sorry I posted before discovering this thread) and I'll try your registry tweak.
But you say that it is "a known change" to the HD2, could you tell us where you saw it ? Is there another discussion about the BT stack somewhere or more generaly about the Widcomm implementation in the HD2 ?
The HD2 being so recent and in short supply, I'm a bit surprised something like that is "well known"
Thanks for your help.
It works !
graemenwallace, I just tried after applying your tweak and... OMG, this is AWSOME man, it just WORKS !
I still just have one gripe though, it seems that the car doesn't always receive the RF level correctly at the first connection. Sometimes it sees the phone as having no carrier at all (no bars in the RX level display), preventing the car to make any calls, but as soon as I receive a call, the level resets to full bars and I can pick the call and make calls myself after that.
When the first call comes in, I can see the display with no bars and a "?" appearing on top of it for a short time before it becomes full bars.
So there is still some compatibility problems, but at least now I can pick-up incoming calls without risking my life.
So I suppose you are a potential life saver then
Thanks mate,
Yves.
Bluetooth is working YES with JVC KD-AVX44 ADV49
After the registry tweak from graemenwallace the bluetooth connection is working properly with my car radio (JVC KD-AVX44/KD-ADV49).
The phone functions ok now (incoming & outgoing calls) Also the AD2P connection is super (very good sound)
Also the ID3 tags are functioning (didn't function with the X1 Xperia)
I see the track title now into the JVC display
Skipping etc. all is functioning. I will tell HTC about it because I have a ticket running for this issue. I think they have to solve this issue
Big thanks for this trick
By doing a little search on the net, it seems like graemenwallace suggested that this problem is not new with smartphones that identify themselves as such.
The tweak above forces the BT stack of the phone to identify itself as a standard phone instead of a smartphone.
What's puzzling is that my BMW handsfree worked with other smartphones so far, including the iphone.
Anyway, it's ok now, but I wonder what bad press this will cause to HTC.
The majority of the users are unaware of this kind of wizardry and this justs adds up to the long list of bugs of the HD2.
When I first got the phone a few days ago I was rapidly convinced to return it immediatly as it's fancy interface wasn't enough to overcome all the shortcomings. It was plain unusable as a business phone.
Now after applying most of the tweaks, it begins to show potential, but HTC really has to work on the problems we can't fix by tweaking the registry.
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
jah said:
Works fine with the Ford BT system in the Ford Focus (2009).
Click to expand...
Click to collapse
Does your Ford system have the Bluetooth audio choice?
I get my Ford Focus changed every six months coz i'm a driving instructor and it comes as part of the deal.
On my last Ford Focus my htc tytn 2 connected ok and I could make and receive calls ok.
However, when the new car was delivered the Ford system had bluetooth audio choice and ipod integration which the other one didn't.
Now my htc tytn 2 didn't connect very well at all.
Now with my HD2 it does connect only if I have the bluetooth audio profile selected.
But now the music player keeps appearing and wants to play music all the time. If I pause the music on the phone it just starts replaying.
Anyway I will try the registry tweak in this thread and hopefully that will solve the problem.
Paul.
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I have the same problem. I`ll try to pair my HD2 with MB C-klass using SAP but i can`t get them connected it seems like a SAP adaptor can`t activate a PIN input window on HD2 (i guess). With other phones it works perfect (tryed with Nokia 5800, 6500).
Shark_Abuser said:
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
Click to expand...
Click to collapse
could you pls describe, how did get them paired? when i try to pair them, i see the device`s id, try to "call" it, see pin code and after that i hear the descending tone. and it nothing occurs. SAP is enabled, device is discoverable, what else? Any idea?
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I feel your pain, my wife has a GolfPlus and the rSAP instalation is crap.
It's overly expensive and useless if you don't have one of the few phones compatible with it.
Unfortunately, many customers are falling in this trap, thinking it is a standard handsfree, but it is not, it is a full GSM build-in which only access your phone SIM card to log into the network and download your contacts.
In the case of my wife, the dealer was honest and clearly stated that it was a mistake to order this option.
The only problem is that he had no other alternative than proposing an Parrot retrofit which wasn't really an option for me as it wasn't integrated in the car and certainly not in the navigation system.
But internet is your friend and the solution is quite simple, the Kufatec kit.
This is brilliant, it is a small box that connects to the CAN bus of many german cars and integrates perfectly into existing navigators, it uses the steering wheels command buttons and so on.
It is much better (more functions) than original BT options, is tailored to each brand so that the displays are in the same style as the original ones etc.
More interesting, it is field upgradable (just a laptop with BT) so that it is potentialy compatible with anything existing or not yet.
And it only costs a fraction of this crappy rSAP option.
In your case, the good news is that it can simply replace your actual rSAP kit for a minimal installation fee. (the CAN bus has to be reprogramed however, so professional instalation needed)
There is another solution: to replace the unit you have (it is situated under the driver's seat) by a skoda unit. This unit has the same connector but is simple handsfree instead of rSAP.
Hope this helps.