My Wizard won't Power Up please help - 8125, K-JAM, P4300, MDA Vario General

Hey Guys,
I was using my phone yesterday all day and all was fine until last night when i turn it on to make a call the screen won't turn on. This is quite normal with my Wizard so what i normally do is take the battery out and put it back and power on.
But problem with last night is when i took the battery out, it won't power on again.
I have tried plugging into the charger but the charging light won't even lit up.
Can someone please give me some ideas of what i should do? This phone is less than one year old and still under warranty, but the problem is i bought this phone overseas and now living in Sydney.
Please shed some lights.
Thanks

Sounds like a faulty battery. You can try your friend/store battery to see if it works.
More info on your ROM (did you flash it, or is it using original ROM) and stuff would be helpful.

hanmin said:
Sounds like a faulty battery. You can try your friend/store battery to see if it works.
More info on your ROM (did you flash it, or is it using original ROM) and stuff would be helpful.
Click to expand...
Click to collapse
Hey hanmin,
Thanks for the reply, while everything on my Wizard is original ROM. I never upgrade it or downgrade it.
So yeah everything is the same. I would love to find out what version ROM i use but as you already know i cant power on the thing the sad thing is all my contacts is in there plus my life saver TomTom is on it as well, i almost die today without it.
I really hope its the battery, heading to the battery shop tomorrow, finger cross its the battery.
Thanks again

Related

MDA will not turn on!

I know i'm being a pain but now my MDA will not turn on, i was following the CID unlokcing thread, downgraded to Wizard Love ROM which went fine, the proceded to flash buttons 1.5 ROM and as usual it hung, went to do a reset to bootloader screen to reflash but it never got there , it doesn't turn on, battery was charged earlier can't have run out already can it?
Any ideas? i've tried to find info to help but can't seam to find any.
boomdiddly said:
I know i'm being a pain but now my MDA will not turn on, i was following the CID unlokcing thread, downgraded to Wizard Love ROM which went fine, the proceded to flash buttons 1.5 ROM and as usual it hung, went to do a reset to bootloader screen to reflash but it never got there , it doesn't turn on, battery was charged earlier can't have run out already can it?
Any ideas? i've tried to find info to help but can't seam to find any.
Click to expand...
Click to collapse
I'm tempted to send it back to t-mobile as not even the barrery indector is showing, might try and get a battery charger for it and see it if is the battery thats died, i had no worning messages, any help i would be greatfully.
Thanks
Paul
boomdiddly said:
I'm tempted to send it back to t-mobile as not even the barrery indector is showing, might try and get a battery charger for it and see it if is the battery thats died, i had no worning messages, any help i would be greatfully.
Click to expand...
Click to collapse
I know you've posted elsewhere, but it really helps if you tell us your phone model, if its G3/G4, what the IPL/SPL was before the problem started, etc...
Unfortunately, with the little info you've provided, I can't say for sure what has happened, but on first blush that sure sounds like a brick.
I would suggest you take the battery out of the phone, then press and hold the power button for 10 secs (this should discharge any remaining power) and leave the battery out for 30 minutes (might be excessive, but lets play safe). Don't plug it in and don't do anything else with the phone.
Now, after 30 mins pass, then put the battery back in and plug it into the wall (not your PC, but the wall). Again, don't do anything else. Don't press the power button or anything. If the phone acts like its trying to turn on, then turn it off. Let it sit plugged in to the wall for about 10 minutes. The charge light may or may not come on. If it does come on, then just leave it. If it doesn't come on, then try turning the phone on. If it comes on, then leave it on for 30 mins then turn it off to let it complete the charge.
If none of this works, I suspect you either have a dead battery, or your phone is a brick.
mfrazzz said:
I know you've posted elsewhere, but it really helps if you tell us your phone model, if its G3/G4, what the IPL/SPL was before the problem started, etc...
Unfortunately, with the little info you've provided, I can't say for sure what has happened, but on first blush that sure sounds like a brick.
I would suggest you take the battery out of the phone, then press and hold the power button for 10 secs (this should discharge any remaining power) and leave the battery out for 30 minutes (might be excessive, but lets play safe). Don't plug it in and don't do anything else with the phone.
Now, after 30 mins pass, then put the battery back in and plug it into the wall (not your PC, but the wall). Again, don't do anything else. Don't press the power button or anything. If the phone acts like its trying to turn on, then turn it off. Let it sit plugged in to the wall for about 10 minutes. The charge light may or may not come on. If it does come on, then just leave it. If it doesn't come on, then try turning the phone on. If it comes on, then leave it on for 30 mins then turn it off to let it complete the charge.
If none of this works, I suspect you either have a dead battery, or your phone is a brick.
Click to expand...
Click to collapse
right phone is a G3 is was running the IPL/SPL of whatever buttons ROM has, as i said it hung like it's done a couple of times before when i tried buttons ROM but the other times i've just got into the boot loader menu and re-flashed and away i go, i'll try the battery thing in a fue mins, the battery was showing no signs of going bad was holding charge fine do the batteries just go like that? if it doesn't turn on would i be able to send it back to t-mobile as it's still in warrenty could they fined out it has a custom rom on it i.e is there away to say look at the rom on another peace of equipment to see if original or not, don't know if that makes sence.
grrrrrrrrrrrrrrrr was going to stay with the wisard love rom i kinda liked it, wish i had now
thanks for the info
Just out of curiosity, but why did you go back to the Button ROM? Once you CID Unlocked, you are done with that process. You can flash official 2.x and custom roms to your heart's content and not have to go back to the Button ROM again. Only time you ahve to do CID unlock again is if you do go back to 1.xx IPL/SPL for some reason.
Good luck, I hope that works for you. As for warranty, but doing any custom stuff you void your warranty, but if the phone won't come on at all, then I don't see how they will know (not like they are going to pop a chip out and look to see what's on it).
And no, I wouldn't think the battery would just completely die under normal use. You usually start noticing it can't hold a charge first.
Could be this is a hardware issue, but really hard to say.
mfrazzz said:
Just out of curiosity, but why did you go back to the Button ROM? Once you CID Unlocked, you are done with that process. You can flash official 2.x and custom roms to your heart's content and not have to go back to the Button ROM again. Only time you ahve to do CID unlock again is if you do go back to 1.xx IPL/SPL for some reason.
Good luck, I hope that works for you. As for warranty, but doing any custom stuff you void your warranty, but if the phone won't come on at all, then I don't see how they will know (not like they are going to pop a chip out and look to see what's on it).
And no, I wouldn't think the battery would just completely die under normal use. You usually start noticing it can't hold a charge first.
Could be this is a hardware issue, but really hard to say.
Click to expand...
Click to collapse
i wanted to go back to the button ROM so i could CID unlock my phone, i was having trouble with buttons rom hanging like it did this time and it was sugested that i downgrade to wizard love rom then to buttons rom. I know it voids my warrenty but as u say the phone won't come on at all, oh well i'm doing the battery thing now. think i'll get the battery charger to see if the battery needs charging you never know!
boomdiddly said:
i wanted to go back to the button ROM so i could CID unlock my phone, i was having trouble with buttons rom hanging like it did this time and it was sugested that i downgrade to wizard love rom then to buttons rom. I know it voids my warrenty but as u say the phone won't come on at all, oh well i'm doing the battery thing now. think i'll get the battery charger to see if the battery needs charging you never know!
Click to expand...
Click to collapse
looks like i've bricked it lol
Sounds like it could be the battery, in some cases it will fully discharge (e.g. when shortcircuited) and then can no longer be charged in any regular way. You can try this:
http://forum.xda-developers.com/showpost.php?p=1206238&postcount=9
SteRo said:
Sounds like it could be the battery, in some cases it will fully discharge (e.g. when shortcircuited) and then can no longer be charged in any regular way. You can try this:
http://forum.xda-developers.com/showpost.php?p=1206238&postcount=9
Click to expand...
Click to collapse
Thanks for the info, gonna get a desktop standalown charge for the battery, have my old K750i i can use while that turns up.
boomdiddly said:
Thanks for the info, gonna get a desktop standalown charge for the battery, have my old K750i i can use while that turns up.
Click to expand...
Click to collapse
right desktop charger has turned up and i'm currently charging the battery lol now for the true !!
i'll let you know as soon as i put it back in the phone
boomdiddly said:
right desktop charger has turned up and i'm currently charging the battery lol now for the true !!
i'll let you know as soon as i put it back in the phone
Click to expand...
Click to collapse
well it didn't work, so as it was in warrenty i returned it to t-mobile, who proptly replaced it with a brand new one, mmmmmmmm shiny new!! no more custom roms for me, but gonna do a bit of customisation on the standard t-mobile rom lol
SteRo said:
Sounds like it could be the battery, in some cases it will fully discharge (e.g. when shortcircuited) and then can no longer be charged in any regular way. You can try this:
http://forum.xda-developers.com/showpost.php?p=1206238&postcount=9
Click to expand...
Click to collapse
i have to same problem, but the batttery was fully charged when i was flashing. so it should still have more than 80% battery, so y it doesnt turn on any more?

Phone Does Not POWER ON

My Neo all of a sudden went blank since saturday.It so happened..
I wanted to make a call, I removed my NEO from POCKET and It just showed the GREEN LED BLINKKING the POWER button dint responded at all..
I had to reset the NEO and now its not showing any thing
Does not respond to the wall charger nor any LED only thing happen is the phone gets heated on Charging(as usual as it did earlier)
Does any one know the trick of stripping the wall charger and than short the pins ...
Which is the 1st Pin from bottom or from top..
Or ANY OTHER ADVICE PLS HELP ME!!
Where could be the problem as this problem had occured earlier also i remember it was 07/07/07 and I was in office and same the neo went BLANK.
Lucky was I in the evening I went home plugged in the wall charger and it came to life in around 21~30minutes
Hope my NEO is back to life soon !!
Is it really nothing to worry about or shall I start looking for a new phone
Hi...
This same thing happened to my Neo a couple of days back...
here is the trick .. charge it till you see the green led light meaning it charged 100%
THEN keep the battery pack seperate from the phone.
meaning dismental it for a whole day (24 hrs) in a dry place ....
after a day the NEo will work....
my sure did...
rekcah said:
Hi...
This same thing happened to my Neo a couple of days back...
here is the trick .. charge it till you see the green led light meaning it charged 100%
THEN keep the battery pack seperate from the phone.
meaning dismental it for a whole day (24 hrs) in a dry place ....
after a day the NEo will work....
my sure did...
Click to expand...
Click to collapse
\\\
I had kept it to charge for the entire night yesterday,thatz around 7~6hrs
the LED does not turn GREEN at all..
I will try to remove the BATT for whole night today..
Any other trick meanwhile,
Also does any one know why does this happen firstly.
Is it because the processor just goes to DEEP SLEEP below 50MHz or there is a problem with IPL or some other stuipid thing
Mine is a G4.and had last installed the PDAViet Touch Flo v5
Any one els who can advice me on this.
Any one had the same error earlier!!
Well you might as well try with other battery. If the old one is not charging it might be dead... Have you tried measuring it?
Had Any One Faced Such A Problem!!
chavdar said:
Well you might as well try with other battery. If the old one is not charging it might be dead... Have you tried measuring it?
Click to expand...
Click to collapse
I had given it in repairs..
they informed me that even after installing the BATT prophet shows no sign..
I just dont understand what is the problem has any one els faced such a problem
Rip-prophet??
I just had a word with a service guy where I had given it for repairs!!
He informed me the problem has got notihng to do with the software aspect.
He confirmed its a hardware [email protected]@
Can any one recommed me where can I get the phone repaired in India>>Mumbai..
I Think I will buy a CHEAP nokia now as I dont have enough money to spend again on a expensive phone like this one!!
I feel that the processor has gone in a deep sleep any ways to retrive it to 195Mhz...
Or is it the problem with the IPL/SPL
pls HELP and pray for My PROPHET for its LONG LIFE
Its been almost 15days now and still my neo is not working..
The repaires guy told me that may be something is gone wrong mainly because I had dropped the phone from my hand some 5~10days back before it went DEAD.
Can u guys tell me how manny of u have LOST their PDA phone s after it failed to repair..with the reason for the failure like short circuit or just like mine!!
Can any one help me with the service manual for prophet
I dont know how true is this ...
What if i m not able to get it repaired at all here in Mumbai>>INDIA..
Any one can help me with the board of neo or some solution in repairs..
I feel that the PDA manufacturers must atleast make the phones RIGID or shock proof just like nokia..so it can take some jerk!!and we dont have to LOOSE our valuable phones..
I m afraid but I dont think I shall ever buy a PDA phone again...mainly because its too much expensive for their limited LIFE SPAN just like in my case..
Hey Mate,
When I first got my prophet, it did the same thing, no lights, nothing. I had the battery replaced with an NON-OFFICIAL prophet battery (i.e, A cheap unbranded one), and it went - it's running perfectly now too with WM6
owenw said:
Hey Mate,
When I first got my prophet, it did the same thing, no lights, nothing. I had the battery replaced with an NON-OFFICIAL prophet battery (i.e, A cheap unbranded one), and it went - it's running perfectly now too with WM6
Click to expand...
Click to collapse
Hey buddy thx
I shall surely try with a new batt..
fing crossed.
Any progress on this???
i ja sam zakucao svog.. .
pozdrav iz "susjednog" zg-a futogu...
anyone figuired this out? my phone is dead too, i lost my charger a few days ago and i've been charging it with my laptop, until a few days where it ran out of juice, when i plugged it back in, it never turned out, im tried leavign it plugged in for 24 hrs, tried other adapters, kept the battery out..etc
nothingg!! Helpppp

Battery or device dead? Any chance for my G4?

Hi guys!
I had some hardware related problems last week with my wizard (G3). I sent it to vodafone and got a new device. The new device is a G4-Model, so I vistited the Wizard G4 forum to check out how to flash new roms to G4 models.
I flashed my wizard with the shelltool and got some problems while upgrading. My taskmanager said that shelltool doesn't respond anymore. I waited one hour and took the phone off the usb-cable, hard-reset the phone and everything was working fine (thought so).
After the setup i noticed that the battery was pretty low. I think it was about 7% or something like that. I put my wizard on charge via the usb-cable. I took it off the cable when the battery showed 27% because I wanted to go out.
After being away from home for 15 minutes the battery was down to 12%. I think about 15 minutes later the device was off - completely.
When I was back home at night, I put the wizard on the wall charger and went to bed.
This morning I noticed that the RED LED was constantly on... I was surprised that the led wasn't green, because normally it should be green after 5 hours of charging. I tried to turn my device on - nothing!
SteRo tells in this thread what to do, when the battery wont charge anymore. I tried it and this and till now it didn't work. I'm trying this at the moment one more time.
Is anyone out there who had the same problem or has an idea what happened and what i can do right now?
Please xda, help me!
Vi
EDIT: unimportant
What a beautiful day I tried the "direct" charge method from SteRo again and this time it worked! My wizard booted up normal and the orange LED started to shine
XDA - I LOVE YOU
Have a nice weekend!
EDIT2:
What a ****in day -.-'
Just checked my wizard for the charge status... guess what? it's off!
I have no idea what's going on... Please help me!
I trhink I would send that one back too since they just sent it to you. It's probably just a faulty battery though.
I had this thought too, but the problem is, that I have a WM6 rom on the device and I think that I've no chance to get back to a wm5 rom. Would you send it back immediately or qould you ask for help in a provider shop?
Thanks, Vi

Please Help Me! Imate Jasjar Issue

Greetings! First Off I'd like to say xda-developers rock! I've searched high and low for a solution to my prob and cannot quite find one. My Jasjar has a very hard time coming on. Most of the time a soft reset will not do the trick. I bought a brand new battery with no luck. If you take the battery out, wait about 4hrs or so, and put the battery back in sometimes it will boot to winmo and work fine for about 15min. then the screen will fade leaving blue lines across. After that it unresponsive even if you try to charge it. The battery meter in the phone reads 100%
Things I tried/done:
READ THE WIKI
reflush with several different roms.
bought a new battery
check the internal battery
shocked the internal batt with a 1.5 AA bat like mentioned in a post
updated/downgraded boot loader.
I'm at my wits end with this. I love the phone but i might have to sell it on ebay.
PLEASE HELP ME!
Dolemaine said:
Greetings! First Off I'd like to say xda-developers rock! I've searched high and low for a solution to my prob and cannot quite find one. My Jasjar has a very hard time coming on. Most of the time a soft reset will not do the trick. I bought a brand new battery with no luck. If you take the battery out, wait about 4hrs or so, and put the battery back in sometimes it will boot to winmo and work fine for about 15min. then the screen will fade leaving blue lines across. After that it unresponsive even if you try to charge it. The battery meter in the phone reads 100%
Things I tried/done:
READ THE WIKI
reflush with several different roms.
bought a new battery
check the internal battery
shocked the internal batt with a 1.5 AA bat like mentioned in a post
updated/downgraded boot loader.
I'm at my wits end with this. I love the phone but i might have to sell it on ebay.
PLEASE HELP ME!
Click to expand...
Click to collapse
Please do not double post, on your original pthread and with patience someone will give you the right direction
Good luck
Dolemaine said:
Greetings! First Off I'd like to say xda-developers rock! I've searched high and low for a solution to my prob and cannot quite find one. My Jasjar has a very hard time coming on. Most of the time a soft reset will not do the trick. I bought a brand new battery with no luck. If you take the battery out, wait about 4hrs or so, and put the battery back in sometimes it will boot to winmo and work fine for about 15min. then the screen will fade leaving blue lines across. After that it unresponsive even if you try to charge it. The battery meter in the phone reads 100%
Things I tried/done:
READ THE WIKI
reflush with several different roms.
bought a new battery
check the internal battery
shocked the internal batt with a 1.5 AA bat like mentioned in a post
updated/downgraded boot loader.
I'm at my wits end with this. I love the phone but i might have to sell it on ebay.
PLEASE HELP ME!
Click to expand...
Click to collapse
Did it fall on the ground? It could be mobo...
No it never fell on the ground or anything...like i said just the software trouble.
And very sorry about the postings i am doing but you can imagine having such a phone and unable to use it...

Please help me !!!

Hey guys, Well I'm going staight to the point. My Jasjar is letrally DEAD. two days ago. the battery was about 4-2%. the phone kept showing a message that I should recharge the battery "abviousely", but the problem that I wasnt at home to recharge it. Anyways, the phone turned off after a while and I thought it was becuse of the battery. So, when I wanted to recharge the battery, there was nothing, the phone didnt turn on. I even replaced the battery, but no good, and to make things more confusing, when I remove the battery and put the charger, the red light turns on, which means that there is a response, and when I put the battery back, just nothing.
I really hope that someone here help me, because I desperately need the phone these days. please guys help me.
Sorry for the long topic but I tried to give details as much as I could
not to be too obviouse, but you have left it charging for a while? the Uni will not switch on until the battery has been charged for a bit. However, I do believe the red light it on at this stage, even though the Uni won't switch on. Also, new batteries may not come in charged state, so same problem.
Another test may be to charge the universal in a battery charger, rather than the Uni.
boss shinoda said:
Hey guys, Well I'm going staight to the point. My Jasjar is letrally DEAD. two days ago. the battery was about 4-2%. the phone kept showing a message that I should recharge the battery "abviousely", but the problem that I wasnt at home to recharge it. Anyways, the phone turned off after a while and I thought it was becuse of the battery. So, when I wanted to recharge the battery, there was nothing, the phone didnt turn on. I even replaced the battery, but no good, and to make things more confusing, when I remove the battery and put the charger, the red light turns on, which means that there is a response, and when I put the battery back, just nothing.
I really hope that someone here help me, because I desperately need the phone these days. please guys help me.
Sorry for the long topic but I tried to give details as much as I could
Click to expand...
Click to collapse
Welcome to the forum
I can add to -Jonny- suggestions to have a look here:
http://wiki.xda-developers.com/index.php?pagename=UniversalBatteryIssue
Good luck,
Well, I've been charging it for a long time (2-3hours), but nothig...
Also, another strange thing poped up. whnen I leave the phone with the battery in it without charging for a while, and I plug the charger, the red lightturns on for like a munite and turns off again !!!!
I really don't know what to do, I don't even know what caused this problem, but from your replys I can tell that the problem is from the battery, and nothing is worng with the phone, cuz someone told me that it's a motherbord problem. So, is my phone ok? is it just a battery problem??
Thx for the replys, BTW
Suggestions
Try your battery in another Uni.
Try another NEW battery in your Uni.(you've )
Try to see if your device can be put in bootloader so to know it is not dead completely.
Simple suggestions.
But ..Been there...Done that..worked.
kalya said:
Try your battery in another Uni.
Try another NEW battery in your Uni.(you've )
Try to see if your device can be put in bootloader so to know it is not dead completely.
Simple suggestions.
But ..Been there...Done that..worked.
Click to expand...
Click to collapse
Well thats a nice idea ,, Im ganna give it a try ASAP, and when I do so, I'll let ya know what happened
Thx for the reply

Categories

Resources