Related
Hello all,
well it is not 100% free, you need to earn it.
The price is to allow me to downgrade the RSU to 4.16
I am unable to do this and have tried so many things so far without any success.
I have RSU 3.23 now
ROM wise, I have no problem, I can change it using the SD method and the ismgtool.
Well, I am sure you will ask, what is the guarntee? Tkae my word for it for the time being and try me.
You can send me a private message or e-mail me ([email protected])
If I receive the solution from more than person, I will look at the time I have received the pm/e-mail and the prize will go to the eriler responder.
HURRY :!:
and the winner is: to be updated
and the winner is:
no winner yet!!
Work harder folks
You have "RSU 3.23" and want to **downgrade** to "4.16"? What am I missing :?: :?:
yeah, numbers are meaninless!
Anyway, just solve to me the issue of downgrading 3.23
Hmmm ! i guess you can't
Hello
as far i know and if my memory still works i read something which says you Can not roll back to older version and that was on the 3.23.01 release note.
HTC Advice not to try to downgrade your GSM cause you might distroy your device and lose the GSM capabilities.
also few other issues include
Fixed: SIM unlock code hacked
1. Disable memory dump function.
2. Unlock code encryption.
Fixed: Do not auto-reactivate PDP context when network reject PDP context activation
Fixed: Specific message should store in SIM without affecting the VMI
Solution: Change the DCS of specific OTA message from 0x00 to 0xf2 (Store message to SIM)
Fixed: After dail a wrong number, dail second call with correct number within 30 seconds,
this call will be established for 2 seconds, then be automatically cancelled.
Solution: ACI state is not syncronize to MMI state. Syncronize the state of ACI and MMI.
Fixed: USSD Problem
Fixed: Inter-SGSN Issue
regards
Othman
www.pocketpc4arab.com
Othman,
are you replying to a different topic? :?
What is the relation between what you have written and the downgrading issue?
Place adaptrom.exe in the up or down grade application folder.
run adaptrom, then the up or downgrade application.
This will change the rom as well as the radio stack.
einas_canada said:
Hello all,
well it is not 100% free, you need to earn it.
The price is to allow me to downgrade the RSU to 4.16
I am unable to do this and have tried so many things so far without any success.
I have RSU 3.23 now
ROM wise, I have no problem, I can change it using the SD method and the ismgtool.
Well, I am sure you will ask, what is the guarntee? Tkae my word for it for the time being and try me.
You can send me a private message or e-mail me ([email protected])
If I receive the solution from more than person, I will look at the time I have received the pm/e-mail and the prize will go to the eriler responder.
HURRY :!:
and the winner is: to be updated
Click to expand...
Click to collapse
you can send me the device, i can run over it with my car, get AT&T to replace it with a new one ( I have insurance from them) and BAM! start from scratch
OK, how about this:
1. Obtain the RSUpdate.exe and accompanying files for the radio stack version you want to upgrade/downgrade to.
2. Copy them to the \Windows folder on your device
3. On the device (use File Manager), run RSUpdate.exe. This will manually update the radio stack.
4. Send the free XDA to me, since a winner is me!
JoshB
2JoshB: It is not so easy as you wish.
You may not downgrade 4.21 radio to 3.19 and below in this way (though it is Ok for greater versions). The restriction is by design and appears during actual uploading to radio module due to some kind of _internal_ checking.
I can suggest the following:
-convert RSUpgrade.cp64 you want to upload to binary format. Let it be 3.19 for example
-try to find 03 13 and 13 03 entries (= 3.19 in hex)
-If entries are exists -try to replace them with 04 15 or 15 04 accordingly (= 4.21 in hex).
-convert RSUpgrade.cp64 back to text
-try to flash these files in the usualj way (upload to windows etc...)
But this way is very dangerous. I mean that such a stupid replacement may corrupt radio stack code, so your radio will be broken completely.
More than that: radio stack version checking may be implemented not by number but features available in RSU. So version changes may not be enough to downgrade radio.
the more reliable way is to disassemble radio stack and bypas version checking in more sensible way. But unfortunately my qualification is not enough for doing this.
falconeyez said:
you can send me the device, i can run over it with my car, get AT&T to replace it with a new one ( I have insurance from them) and BAM! start from scratch
Click to expand...
Click to collapse
Can we send you a whole box to drive over ?
Till now, there is no winner
Will there ever be............
Prove the solution is working and there will be.
Soultions that work once like driving the car over it are not acceptable :lol:
Come On guys!
Hello all.
i have been searching the forum for the solution of this problem, some guys suggested solutions that involve a file that is no longer available, upgrade.zip which is aparently a radio upgrade(or downgrade) made for the SD card (a startup.exe in a startup directory).
Well, having said that, i had to solve this problem last night, and here it goes.
after trying original ROM upgrades, all versions, 3.14,3.17,3.18~4.
nothing worked.
finally, i grabbed a copy of xda-developers's 1.1 ROM
and guess what!!!
the phone started up, gave me the screen allignment and the whole menu!
sure enough, ran file commander(that version did not have file manager) copied the RSU files over to the windows directory, and the exe file to the windows\startup and rebooted the phone.
it stopped at 1% again... NOW REMEMBER, i had an EMPTY BATTERY...
the 1% ERROR is a battery issue, that turnes into this issue when the modem upgrade FAILS.
so here is what i did. and you be the judge.
i ran active sync from the phone, and it did connect(while the upgrade program is still running) and left the room/
in 10 minutes i came back and the upgrade was completed, so here is what i think
i think that the RSU will still run if it was in the background!!! even with an empty battery(connected to the charger ofcourse.
i did not have much time to do anymore testing, but i am sure that someone with the same problem will make the time. the key from my experience is that the proccess will complete if it is in the background.
there u have it.
good luck.
i forgot to add that the upgrade i used was taken from yorch's page and it was the latest Tmobile, i had to downgrade later to an older version that i have to solve the network issue, but it was done(the downgrade) like a charm, i had a full battery then.
here is the Tmobile RSU link v6.24
http://www.yorch.net/downloads/ROMS/TMOradiostackupgradeR624 .zip
a 1.26 MB file.
Hi!
Now I'm taking a try (unfortantely I've found only the special edition rom 1.2).
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
One more thing: maybe the version of active sync counts? Mine was 3.8.
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
LumpiStefan said:
plg said:
No success with SE ROM 1.2. Where could I download 1.1 from? Found it nowhere.
Click to expand...
Click to collapse
http://lumpistefan.dyndns.org/tools/special_rom_1.1.exe.zip
HTH
Stefan
Click to expand...
Click to collapse
Thanks, Stefan! Maybe this one will help...
Hello to all, and mr stefan,
I upgrade my qtek 1010 with SFX56 windws 2003, it also upgraded my RSU, which is not working in Middle East. Kindly advise me how to downgrade or upgrade with other RSU. Thanks
your problem is in the network selection, search the forum for the proggy that changes it from 1900 to 900 and you should be OK.
i hate telling anyone to search i know how hard it is, but i do not have a clue where the proggy is, meanwhile, if i run across it, i will point it out,
if not, go to the bootloader, select GSM and change it from there, you will loose all data so backup first,
Good Luck.
search for "bandwith switch tool"..... good luck.
here it is on wiki
http://wiki.xda-developers.com/index.php?pagename=BandSwitchTool
tell us if this fixes your problem.
if not, you will find links to radio upgrade on
[/url]http://lumpistefan.dyndns.org/tools/ thanks to LumpiStefan
for a great resource.
good luck.
never knew you can post as guest
well, again, let us know what happens.
hi all
I just picked up a XDA from a guy who screwed up the radio stack upgrade (it cosy me @$80 USD ) and im now on a mission to fix it...
using your advice I used the XDA developers rom 1.1, this got the phone to start up with the working today screen and menus etc....
I install/copy over the new RSU upgrade files over and reboot
but here is where i get a bit stuck...
I cant get into active sync fast enough before I get the 1% RSU upgrade error, so the upgrade wont run in the background, it just sits there....
how do you get into active sync before the error comes up?
cheers
MADMAX
I'm currently using TomTom 5.00 on my Magician (1.12.550 Qtek ROM + 1.13 Radio) paired with a non-TomTom bluetooth GPS with success; but I would like to upgrade to 5.10 to be able to use CheckPOInt in order to show and warn me about all possible speedtraps.
However, as soon as I upgrade to TomTom 5.10 and I launch the application, my Magician turns itself off. Turning it on again results only in it shutting down instantly again. The only way to gain control again, is to perform a soft-reset.
I even tried several cr****d versions of the 5.10 upgrade, but all have the same effect
Oh, my 5.0 version is installed from the 5.0 BakoNL release + the POI patch, but I did try other installations of TomTom as well.
Could anyone help me out ?
Same problem here
I have exactly the same problem. Can someone help us. Pleeezzzzz...
Before I forget ... my reason to upgrade to the latest Qtek Rom in the first place was to get this update running. With my original I-mate 1.11 ROM I did have the same problems.
A collegue of mine has the same version (installed from the same media) running flawlessly on his HP 63xx series, so I think this is related to the Magician and not the software.
Hi,
What you can try is to download that upgrade but not install it yet.
Just unpack it on your computer and find the gps upgrade and the dll file that came with it. copy these files to your my documents on your pocketpc and then launch it (put the dll file in the windows folder first!!).
It works for me
Hi TomTom fellows,
I am currently running the newest 5.10 version on my Magician flawlessy. I have experienced a few problems in the past (expecially with version 5.00) but I found out they were related to the POIs. I have solved them by renaming the POI.DAT to something else. Sure, I missed the POIs, but I'd rather use my personal ones, so who cares.
Give it a try and let us know...
Silver.
5.0 did have some problems with POI, which could be solved by using an older version of the POI file. 5.10 has fixed this and now POI is working perfectly, as well as everything else. If it's not running on your Magician, most likely you have some other software obstructing it.
I don't dare to bet on it, but I'm quite sure I did run TomTom on a clean device with the same effect. Perhaps it is caused by my 5.00 TomTom release icw the Magician then ?
@raouljokhoe : how do you unpack the files out of the official TomTom upgrade? All I have is the setup.exe and a .apk file ?
TTN5
I'm in Oz.
I have TTN5.1 running with no problems at all on my magician.
Also just the 5.0 allows you to add camera POI's and have an alert for any POI catagory you'd like.
I tried TomTom 5.10, it runs perfectly well. But it does not recognize "Major Roads of Europe" Map. So, how is yours?
I solved the problem by replacing the .exe file (only) using the old version 5.00.
And it is now working flawlessly on my 1.01 ROM (yeah!!).
Note: I experienced a lot of problem with 5.00, but then I got a new .exe from my friend, still version 5.00 but it works perfectly.
TomTom has one big flaw: If the currentmap.dat file is not in \my docs\tomtom\ then things dont work properly. I run 5.10 on my magician with no problems but everytime i hardreset i need to replace the currentmap.dat file. The file basically just says where the current map folder is.
My file says:
& \Storage Card\Great_Britian_Plus-Map\
Click to expand...
Click to collapse
Trust me, sooooooo many problems get fixed by adding that file
Re: TTN5
Esra said:
I'm in Oz.
Also just the 5.0 allows you to add camera POI's and have an alert for any POI catagory you'd like.
Click to expand...
Click to collapse
In Oz ?
I know that just the 5.0 can warn upcoming POI's, but it is based in number of meters before the POI instead of number of seconds. Also there is no indication when you are speeding. CheckPOInt does all that ...
gogol said:
I tried TomTom 5.10, it runs perfectly well. But it does not recognize "Major Roads of Europe" Map. So, how is yours?
I solved the problem by replacing the .exe file (only) using the old version 5.00.
Click to expand...
Click to collapse
I don't use the MRoE honestly. I am using one of the Plus maps ... so I could not tell you about the Major Roads ...
nedge2k said:
TomTom has one big flaw: If the currentmap.dat file is not in \my docs\tomtom\ then things dont work properly. I run 5.10 on my magician with no problems but everytime i hardreset i need to replace the currentmap.dat file. The file basically just says where the current map folder is.
Click to expand...
Click to collapse
That isn't the problem ... The file is there and correct. At startup of 5.10 I even have just the time to see part of the map before the PDA shuts itrself down. The 5.0 version does run well, with POI's and all.
Apparently I'm not the only one with this problem ... and others run TT5.1 flawlessy on their device
:?:
At last someone having my problem
I have been getting this very problem too. Searched everywhere to find an answer at last I have found other people who have my problem!
My story so far....
I started with the cracked version originally of TT5.0 which worked ok and I didnt need to activate the maps. I then downloaded the 5.1 update from TT website, I then installed it.
I succesfully launched TT5.1 but it wanted me to activate the maps. So I downloaded the 5.1 crack using p2p software and installed it. this involves switching the pukka tomtom.exe file on your ppc for the cracked one. Soon as i launched the crack version I started getting these crashes on launch that shut down the magician.
So after loads of reinstalls/hard resets I finally decided to go and buy the original discs. So after recieving the discs I hard reset my device (again) and started a fresh brimming with confidence that my problem would be cured. But to no avail using the pukka route with official activation codes and the official 5.1 update it still crashes.
So my theory is given that other users use 5.1 ok that the 5.1 crack is the devil in all this, as its use somehow screws with your ROM rendering it useless to any further reinstalls of the proper the 5.1 tomtom software. And the only way forward is to reflash your rom So this I am now planning to do as one last attemt to get it working and to gain the big storage facilty.
As I now have properly registered software I now put my self in touch with tomtom suport to see if they had any ideas on what the problem was. (obviously neglecting to mention I originally used the crack version :wink: )
Here is the support thread so far
Customer 03/10/2005 11.36 AM
I have just bought your tomtom navigator 5 software, I have installed the version 5 updated it to 5.1 and installed the UK maps. The next step I loaded TomTom from the the today screen to start the set up process but the screen just goes black and crashes mt PDA. What is causing this It's brand new it should just work out of the box and your site says it supports my device?
Customer 03/10/2005 06.06 PM
I have since uninstalled all the software, deleted bad registry keys, and reinstalled, this time I just installed v5.0 which started up and allowed me to activate the maps. So then I installed the 5.1 update and it did the same as before and kept crashing my MDA when youlaunch tomtom. The screen fades to black and shuts the unit off. When you press the power again it comes on shows the nav screen breifly then powers off again. Very frustrating! Please help I so need this to work!
Customer 03/10/2005 09.17 PM
OK I rang your support line tonight, as this system seems slow. They had me hard reset my device and reinstall just tomtom navigator 5.0, which does work. The guy stated that there was no need for me to update to 5.1 as there are no known issues with the MDA compact. But I am unhappy about this situation as I wanted to use either checkpoint or poi warner with the tomtom software in order to give me speed camera alerts. Both these peices of software state they require version 5.1 or higher.
from checkpoint site:
CheckPOInt 5 was created with use of the software development kit (SDK) for TTN 5, and apparently it is required to upgrade TomTom Navigator to version 5.1 before applications created with this SDK can run smoothly.)
I await your resonse thx
J
TOMTOM Response 05/10/2005 04.31 PM
Thank you for your email.
We would first like to apologize for the late response of this email. We hope that it has not inconvenienced you.
Your PDA model is not compatible with nor meant to be used with the 5.1 update. All TomTom products and software run on all versions of Navigator 5. As we do not support third party programs, please contact the manufacturer of CheckPOint.
With best regards,
The TomTom Customer Support Team
Customer 05/10/2005 04.49 PM
Thank you for you response
I would like to request that this information be made available with the 5.1 download, so far I have wasted nearly 4 days in time trying to get the update to work. A simple statement on your site about incompatibility of the 5.1 update with the MDA compact would have saved me hours of time and will also help future users of the mda compact & tomtom not go through the same thing as me.
I have to say I find it the most bizzare situation that you provide a software update which cant be used with by some models and you don't state this fact on your website.
>>>As we do not support third party programs, please contact the manufacturer of CheckPOint.
No but you provide the SDK telling developers only to write for 5.1!!! If this is the case with certain models you should tell them to write for 5.0. Third party software is all part and parcel of wanting to buy your software had known I would have skirted passed it.
regards
J
TOMTOM Response 05/10/2005 05.05 PM
Thank you for your email.
Before downloading an update, there in an information page telling who should download the update and what the update fixes. When your model number or issue is not listed, it shouldnt be downloaded.
With best regards,
The TomTom Customer Support Team
Customer 05/10/2005 09.09 PM
Then your site is confusing
It states it is for Pocket PC, my MDA Compact is a pocket PC running Windows Mobile 2003SE
from your site:
This update can ONLY be used when you have already installed a registered version of TomTom NAVIGATOR 5 on your Pocket PC or if you are using a HP iPAQ HW 6510/6515.
fixes:
Improved phone functionality for your Pocket PC
Easier installation of 3rd party (non-TomTom) GPS devices
Improved display on devices which have a VGA display (640 x 480 pixels)
I am using both phone and third party GPS system so this update indicates to me it's for my device!
Please clarify the situation
regards
J
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
(I know this post will probably attract some anti piracy responses, but hey I do buy some software, and I mainly d/l it for free to test the software first).
So to establish whether this problem is related to cracked versions of the TOMTOM 5.1 update or not....
Are you using genuine or cracked versions successfully or unsuccessfully on your Magician?
Hello Jimmy ...
You sure went trough a lot of trough a lot of trouble for contacting TomTom support ! I was honestly thinking about buying an official version myself, but apparently that does not seem to be a good solution either then ... since even with the official support and license, they just wimp away any questions regarding the MDA
I'm afraid I will go back to my Alturion installation if I cannot get this issue sorted (yes, it's an oficial one, really ...), although I do prefer TomTom on the PDA
Unless of course a 5.2 release might solve our problems of course !
I seriously doubt the 5.1 cracked version messing up the ROM honestly .... Why only on the MDA then and not on any other PDA make ?
Cheers !
I am using TT5.0 instead of 5.1 because I need to load TT 2004 USA map. I do have TT5 USA map but found 2004 map works much better in California. (TT5 USA map only display INCORRECT exit number instead of exit street name). So far so good until the day I need to search for "Wal-mart" and it crash. Works fine now after I overwrite the TT 2004 USA POI file w/ TT5 USA POI file. I guess it has something to do w/ the POI file format.
I'm getting this same problem with a fresh 5.0 install. Has anyone found a way around this. Also if anyone has a working version of 5.0 on an MDA Compact could they let me have a file list of what is on the SD card as I'm wondering if there is any third party add ons on it.
Well, I gave it another try doing a hard reset but to no avail.
Since others are running 5.10 without any problems apparently, this must have someting to do with either the rom version or the ext_rom contents.
What versions are you using and is the 5.10 upgrade working for you ?
Me, I run the Qtek WWE_11200_550_11200 + Radio upgrade 1.13 on what used to be an Imate Jam. All roms were taken from the XDA-developpers ftp.
@job : I PM'ed you so we could try to find out what is wrong
Hi,
until now i had no problems using TT5.0 on my Magician (original MDAc german).
Yesterday I upgraded to the new 1.13.01 ROM (org T-Mobile Germany). After upgrading to the new ROM-Version and installing TT5.0 it was not starting anymore. So I decided upgrading to TT5.1, but the downloaded upgrade hangs while installing on the device. The only help is a Soft-Reset.
I think, there are problems with the new ROM. Has anyone same problems or a solution for that problem.
BugzBunny
Looks like Extended ROM problems. Try a hard reset and then soft reset the device, just as the 3 seconds countdown appears. Install TomTom and see if it runs. If it does, try installing the prgs of the Ext ROM one by one, until TT fails again. Then you will know the culprit.
Hi all,
Im new to this Universal forum since i recently got my MDA PRO ( Universal or JASJAR) from ERA mobiles-Poland. I have a few questions and would appreciate if anyone of you masters could answer them for me.
1. Firstly why do all the programs work so slowly??? I assumed that adding some new softwares slowed the system down but did a hard reset and found that there was hardly any improvement. i previously owned a Himalaya and it was much faster with the same software as in the MDA PRO. How can i change this and make more memory for running applications??
2. Is there an option where i could answer a call via the speakers by just lifting the screen of the phone?? i often answer a call with the hood closed and have to open the hood and press the "Speaker On" function before i can use the function. Im not sure if anyone has had this thought and a solution has been found.
3. I managed to download the new ROM from this forum and tried to update it on my machine but got an error " Invalid device" - Kindly contact your operator for the right update. my question is how can I update to a new ROM when running the maching with an excisting one? my device is from an operator in Poland but i would like to upgrade to a new ROM.
4. Lastly is it true that updating the device to a new ROM will increase memory and effeciency of the device or is a ROM update only developed for certain regional functions and software setting??
5. My last question is on my device desktop i can see 8 unread emails. when i select this the machine totally hangs and i have to do a soft reset. is there some way i can change this and reset the problem. Also can anyone tell me how to uninstall a email account once it is created?
my device information is :
ROM Version : 1.20.37 WWE
ROM Date : 12/04/05
Radio Version : ------ ( No information)
Protocol Version : ------ ( No Information)
ExtROM Version : 1.20.129 WWE
Hope to hear a reply soon as i am dying to make a few changes.
Venk
1. to fix most of your problems, upgrade your ROM.
2. Might be better to get a bluetooth headset. Preferably stereo one if you listen to music.
3. If it doesn't belong to the maker of your device (like you bought a QTEK and wanna flash an IMATE ROM) go to the wiki.xda-developers.com It is all explained there.
4. Increased efficiency. Maybe better memory handling but not necessarily more memory.
5. Upgrade the ROM and it will erase everything, even the 8 emails. Just make sure they are not there when you synchronize. Maybe the rom update will help.
P.S. Your ROM is almost 1 YEAR OLD!!!!! Pls. upgrade.
I keep on getting a country error when trying to do it, even though I've used the unlocking program on the XDA. What do I do?
trapper said:
I keep on getting a country error when trying to do it, even though I've used the unlocking program on the XDA. What do I do?
Click to expand...
Click to collapse
What Unlocking program? For Country ID Errors, there is a topic on this, PLEASE USE THE SEARCH BUTTON!
Hint: Use MaUpgradeUT_NoID.exe
guys i need your help!
ive had my HD2 for 2 weeks now, its perfect! until last night when i tried to set up my bluetooth handsfree headset for work the next morning....
when i go to comm manager and try to turn bluetooth on it hangs for 30-40secs and i get cant turn on bluetooth
none of the other bluetooth related icons/programs/settings seem to work either
i had a look in the windows folder for all the files relating to bluetooth (just incase the links where broken) however, any bluetooth related .exe i click on i get this is not a valid pocketpc application error message.
im really hacked off now...in the wm help files theres a paragraph saying something along the lines of if the wireless carrier enables bluetooth on your phone...blah blah
so has t-mobile UK disabled it?
heres the info i can find:
OS version: 5.2.21864 (21864.5.0.81)
Manilla version: 2.5.19202525.0
ROM version: 1.43.110.2 (70315) WWE
ROM date: 10/28/09
Radio: 2.04.50.22_2
Protocol version: 15.26.50.07U
currently ive got tomtom7 installed and working fine, a handfull of games (Xtract/experiment13 etc etc) other apps like the torch button app all working fine, this is the first problem i've had!
so get your thinking hats on people, i will gather info, try out ideas etc and see what happens
UPDATE: i took a deep breath and did a hard reset....now it works!
so what the hell caused it to stop working?
I have the same problem. I installed a lot of app on my HD2 (TMOBILE UK). I have got tomtom 7 navigator as well installed on my device and the same error when I am trying to turn my Bluetooth on.
Maybe someone have somthing similar or the same and can help? Previously I had Samsung I780 with WM 6.5 and TT7 Navigator and no problems with bluetooth.
i just tried a few apps like HDwall (although it didnt display properly)
bluetooth still working...
just doing another hard rest now then i'll install TOMTOM7
ok.
here it is:
After a hard rest, nice clean phone... ran the TomTom7, installed fine, required a soft reset to complete...
after the soft reset i get "BTTrayCE.exe is not a valid pocketPC application"
so now bluetooth doesn't work
any help? i prefer to use tomtom...
There's a couple of tomtom files that have to be deleted from the windows folder to make it work again. Can't remember the names of them now, but if you google the "bttrayce.exe" error then it's one of the first results.
thanks aterlatus