Related
Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc
Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley
sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!
Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?
Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley
Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.
Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc
Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!
Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc
I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?
The rom version is 1.60.00WWE
Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.
Hi Guys: I have got the Widcomm Phone edition stack working on my unit.
It seems to be fine but I have not fully tested all aspects of the software - so if any little bits don't work, let me know...
You need to install the official widcomm 1-4-1-59 version
Then you can upgrade it using the cab file I have made.
The 1.4.1.59 version file I got from the following topic
http://forum.xda-developers.com/viewtopic.php?p=57550#57550
thanks go to mamaich for the file.
the upgrade file consistes of the PE edition files and the required registry entries.
Let me know how you all go on with it - but I am not really a hacker so any serious probs I will not be able to fix...
if anyone else can improve on the installation be my guest
any news about which profiles it support that ms or the old one dont support ?
I hope unintall won't mess up my volume as in case of original bluetoothgps.cab
I can't garauntee it works perfectly, so I suggest everyone make a backup of their system before use.
has anyone tested any BT headset with this new stack?
I've got it installed and it all seems to work well exept for the handsfree/headset profile, I have set up my headset ok it is discovered and bonds fine but when I try to connect from the xda2 the connection fails after "waiting for device" for some time. tried with a motorola hs 810 and a neovoice usb, same with both. Anyone got any ideas?
BT headset
I have a 6315 and an XDA 2, I haven't tried the BT Stack on the XDA 2 yet but I found when I bondeded my HBH-30 to my 6315 once it made the connection my BT Headset shut off for some reson. This caused the bonding to fail, but as soon as I turned my headset back on (while it was trying to discover services) it completed the process and worked on my 6315. I'm not sure if this will be the same, but it's worth a shot.
Brandon
Test results
Hi fellows
Here is little bit of my testing of this new BT Stack, which we all awaiting for..
Proc…
1. Installed as per instructions 1.59 without any problem. During installation was prom to override .dll files – agreed to do that. For good or for bad – will see later.
2. Installed .cab file provided by icarusbop (big thanks to him for doing this) without any problem. Screen shots will be attached below.
3. Reset it as requested upon installation and got Widcomm BT working instead of MS BT..
4. Paired it with my BlueTrek G2 within 3 seconds (which took usually 10 sec with MS BT)
5. BT recognized G2 as device with Headset/Hands-Free profiles and asked to use as default… I said yes…
Here comes Cons part ;(
1. Unfortunately even after paring – my I-Mate can not get connected with G2 (see screen shot)
2. As you can see in another screen shot – there is Hands Free menu – it can not be accessed, or can be accessed ONLY while connection is established.
3. AND the last L … So, this new BT is not working now… I decided to go back to MS BT… SURPISE!!! I am getting message that BT HARDWARE IS NOT INSTALL ON THIS UNIT…. L Assumption - .dll files were overwritten (see Proc 1)
Here is my 2 cents in this jorney… I am hoping that described problems can be fixed and we can make it working (without doing hard reset on my device )
Paul
thanks guys! for testing hands-free/headset profile. by now everything seems to work fine with this new stack except for hands-free/headset profile.
New comments to my testing
1. I tried what NeoCole recommended - didn't work for me
2. As soon as new BT is OFF - MS BT is working fine .....uf
LETS FIX THE HEADSET PART PLEASE
I posted this is another thread - but in case someone does not read that thread . . . it is relevant here as well.
If the intent of this is to get voice dialing without touching the device, that is by only pressing a button on the headset to initiate a voice-dial program to make the call, there is no evidence this works with this BT stack either.
I have been reading other forums with people who have the H6315 already (mine is in the mail to me now) and none of them have been able to make this work. Nor is there any mention of this capability in any of the literature and/or documentation for this device. It seems that if this was a feature of this phone, it would be prominently displayed!
Voice Command
Okay.. on my 6315 I press the headset button, it beeps, sound and voice is now transfered to the headset. I do this before I initate voice command. Now all I do is press a button that activates Voice Command on the PPC and walla, I'm speaking and listening through my BT Headset. This is a huge step forward from using the MS Stack, and I feel that since the Phone Edition of the Widcomm is 1.0.0 I'm sure that they'll associate a hardware button with the headset button in future releases. Anyhow.. I think that the functionality of the Widcomm BT Stack is well worth the work. The XDA 2 would be a lot better device if the BT Stack worked 100% of the time and was fully compatibile.
I also have not got it working.
the Hp 6315 is well know to still require a hardware button press (not on the headset) to activate voice command. They can still not do with any nokia or SE phone can do easily.
Surur
VoiceCommand
That would be correct... One press of the HW Button does it all on a Regular phone.
The 6315 has brought it closer to allow you to interact with programs using your BT Headset, but yes you must still activate the programs on your handset before you can use them with your headset.
So.. to sum it up...
1. You can't interact with Voice Command using MS BT Stack on an XDA 2
2. You can interact with Voice Command using Widcomm Stack on 6315, but you have to activate the headset first, then start VoiceCommand on the PPC by using the HW Button.
Hopefully through this thread we'll be able to give the XDA 2 the same functionality as the 6315.
And maybe if Widcomm provides an update to allow the headset to activate a HW button, we'll be to the one step solution.
I do not want my comments to be read as stating that this is not a worthwile endeavor. I simply meant to make sure that someone does not go to the trouble of installing this new stack (particularly those who might be considered novices) with the mistaken impression that by doing so they will have that "one step" voice dialing solution.
This is by all means a worthwile endeavor, but it is merely a step down the road . . . not the final destination.
Y'all are doing good work - keep on blazing that trail!
hm.. I would think that it is more of MS Voice Dial functionality than BT - to recognize signal sent from headset as request for voice dialing.
When MS released first version of Voice Dialing they did not expect new functionality to have BT headset with hands-free profile connected to the device.
paired with my Jabra 250 = ok
connected to my Jabra 250 = failed
No luck with Moto headset
Eveything else seem to be working. No problems with detecting and working with BT access point
rehman said:
I hope unintall won't mess up my volume as in case of original bluetoothgps.cab
Click to expand...
Click to collapse
Hi Rehman,
i tried to install and uninstall, for the very first time i didn't have to get a Hard-Reset done. the volume didn't disappear. so i believe trying it wont be a harm, but yet i would recommend to get a full Backup first.
Trying to figure this out
Okay, I looked through the whole registry. I can't find anything out of the ordinary. Only thing I can think of is the sound driver. Does anyone know what DLL that is? I bet it's a different version.
If someone that knows more about which DLL does what. Let's get all the DLL's that could pertain to Sound and Phone and compair the 6315 DLL's with the ones on the XDA2.
Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK
Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!
Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye
Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.
took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.
got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...
i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.
Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..
new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!
new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.
peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)
Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..
Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.
redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...
This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.
Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )
new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).
Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?
zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip
Come on people..... please someone help us with this
Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?
I have 2 TP2 both with Vodafone UK WM6.5 stock ROMs.
Have just tried to send pictures between them but get the message "Device does not support a suitable service to perform this operation"
I can send to an old sony but when i paired the TP2s it didnt give me the option to transfer filec for some reason?
Any one know if there is a solution or if this is something i will not be able to get round?
I'm also having all sorts of crap with bluetooth from connecting and not connecting to having to disable and enable all the time to get it to work again.
Havnt got it to work at all, never had a problem with WM6.5. strange they see each other but wont send and recieve
I have a bluetooth function in my Volvo. Worked as a charm with the O2 Live of my wife and my HTC TP.
Since I have the TP2, I can't get it to work. Tried to pair them from both sides and everything seems to work, until I want to call or get a call...
On dashboard screen I can scroll my contacts, but when it comes to call, I see the calling and connecting, but NO sound!!!
Quite frustrating, as I drive alot around.
Had this with the WM6.1 and hoped this would be resolved with the 6.5 (changing back to the original MS BT stack), but no...
Anybody fresh ideas or work-arounds?
Just spoke to HTC, they are unaware of any problems but he is going to get a couple of phones to try them out then get back to me so hopfully there will be a solution soon?
I am having a similar problem with the ATT Tilt2 version and my 2005 TL. Everything connects just fine, but if I try to make a call it just disconnects. If I delete and re-pair the phone it will work until I leave the car. Sometimes rebooting the phone also makes it work. I seem to remember an issue with my Kaiser early on and HTC put our a BT update. I have also reported this to HTC via the web form but haven't heard back yet.
Same here, was able to receive files from an i900 Omnia but wasn't able to send files to this i900 Omnia! Really strange!
Havnt heard back yet but have also just noticed other devices can not find TP2 even though i can find them.
Have made sure my device is visible and all bluetooth is on, trouble is i dont know anyone else with this phone to compare but as i have 2 bought months apart and they act the same im asuming its a fault with software and hoping theres a fix?
My problem is a little different, if I try to use activesync through bluetooth, my headset disconnects, which is pretty stupid.
I really wonder why the hell did they change the bluetooth stack from microsoft, giving us a fancy bluetooth manager interface but crappy performance / less features.
Any ideas or fixes? Cant seem to find any
I found the issue with mine... for whatever reason the BT while showing connected will not place a call while the phone is locked. I always lock my phone so I don't make calls and create bogus contacts in my pockets. I had Wn6.5 on my 2 yr old Tilt (TyTn II) and this wasn't an issue, nor was it with 6.0 and 6.1...
Anyone experienced this or know how to disable?
igo keyboard and mouse
tilt 2 bluetooth conectivity would allow igo keyboard and mouse connect to it software, cant get them to work.
any sugestions
It's not a good sign that Jet Blue doesn't work with the TP2 bluetooth stack.
any one off u have have tomtom installed if u do that can be the prob i have a tilt2 and with tomtom installed i coulnt use bluetooth take a look at a fix i made just incase that is ur problem
http://forum.xda-developers.com/showpost.php?p=4822359&postcount=44