did anyone get smartskey to run with atom ?
I only got the volume up/down to work, DPAD does not respond.
anyone had a different experience ?
(Smartskey thread reports problems with the atom, but no other info).
EZdial - same, but working
Related
Hi there,
I just tried to play Motocross Stunt Racer on my MDA Pro, but I was unable to press multiple keys at once e.g. unable to accelerate and steer at the same time.
Is this a known problem, and if so, is there a workaround or a fix?
:?:
I open the MDA and play in portai modus.
Use left hand to jumpt, drive and the right hand at the cross/enter button. looks stupid but works.
Is there any possibility to fix this issue?
i read a long time ago someone was working on a new driver for the keyboard allowing for multiple inputs... but i don't think it's doable
I have a Cingular 8125, and for some reason the Green Phone button to dial, and the Red phone button to hangup have stopped working. Would anyone know of a fix to this issue?
Thank you so much in advance !!!
After playing around, I figured it out.. but for anyone else that might have this issue Here's what I found to be the problem.
I had IPBlue's Cisco Callmanager softphone installed, I un-installed it and presto ! the buttons worked again !!!
Is there any way of assigning Speed Dial (not Voice Speed Dial) to a hardware button?
Why do I want to do this? I'd like to be able to press a button which would bring up the Speed Dial list. I would then use the jog wheel to scroll through the list and scroll-click to dial that number.
With the phone application open to the keypad press the d-pad left and it brings up the speed dial list.[ Power>Green Phone>Left D-Pad ]Three buttons but still pretty quick.
quicker: power->green phone->jog wheel DOWN (or UP for call history)
Hi all,
I've lost this shortcut (Green button->left D-PAD) and I don't know what happened. As I lost also the Smart dialing menu item. It happened to me once before I upgrade my ROM which returned that back. Now I lost it again and I am going crazy trying to know how this happened or which application I installed did that.
Do you have any idea?
Thanks in advance
ISnowmanI said:
Hi all,
I've lost this shortcut (Green button->left D-PAD) and I don't know what happened. As I lost also the Smart dialing menu item. It happened to me once before I upgrade my ROM which returned that back. Now I lost it again and I am going crazy trying to know how this happened or which application I installed did that.
Do you have any idea?
Thanks in advance
Click to expand...
Click to collapse
With an unaltered Ext_ROM, a hard reset should do the trick.
I don't know if I am missing something, but neither of the key sequences suggested (Power>Green Phone>Left D-Pad or power->green phone->jog wheel DOWN) do anything at all on my Hermes. I even tried a Soft Reset before trying these sequences and nothing happens.
I'm running the latest (South African) HTC ROM, as posted here, if that makes any difference.
Philip said:
I don't know if I am missing something, but neither of the key sequences suggested (Power>Green Phone>Left D-Pad or power->green phone->jog wheel DOWN) do anything at all on my Hermes. I even tried a Soft Reset before trying these sequences and nothing happens.
I'm running the latest (South African) HTC ROM, as posted here, if that makes any difference.
Click to expand...
Click to collapse
Not sure what is happening there, because I have not used that ROM. Did you install all the cabs from the extended rom? If so, it may be that this was left out of the South African version for some reason. My TyTN is out for repair/replacement due to SA issues and I can't check it, but I think the latest TyTN ROM functioned this way. My 8525 with latest Cingular ROM certainly does.
Hi all,
Long time lurker, first time poster. I have enjoyed my 8125 and when I upgraded to the 8525, I ritualistically came here for all the answers. However, there is one issue that I have experienced that is not echoed by anyone else.
I have ROM version 1.34.502.1 and have the following apps installed:
Eten Dialer
Phonealarm
PQzII
TomTom 6 Navigator
TCPMP
Google Maps
Live Search
The problem is that when I freshly boot the phone and place a call, I can manipulate the in-call volume via the scroll wheel. Up, down, no problem. However, when I exit out of the dialer screen and return to it a few hour later, I find that I can no longer turn the in-call volume down via the scroll wheel--only up works.
If anyone can shed some light on this matter, I sure would appreciate it.
Thank you!
Anyone have any insights into this matter?
Fringo said:
Anyone have any insights into this matter?
Click to expand...
Click to collapse
Not much help, but just an observation. The behaviour shown by your scroll volume is certainly not normal. I tested this out on mine. What I did notice was that there is some lag in the response of the scroll volume - so long in fact that it can appear to be non-responsive. It seems the device "remembers" the number of clicks up and keeps trying to raise the volume even though its at maximum. So even if I then scroll down it can take a few seconds for it to complete trying to raise the volume before it begins trying to respond to my down scroll. In fact this behaviour can make it appear as if when scrolling down it actually is raising the volume - but I think this is only due to laggy behaviour in my case?
Mike
I found that the E-Ten dialer disabled my scroll wheel short-cut to call history and quick dial. When I removed it these functions came back. Shame, I like the big buttons.
Mike
Thank you guys for your responses. It wasn't a huge annoyance for me. I just don't like it when functionality just evaporates away from my phone inexplicably. Hopefully, it can be resolved somehow? I will look for further responses.
Thank you all in advance.
It's the PQzII that disable the in-call volume adjustment. But my version is: "down" -> turn in-call volume down, "up" -> switch to today.
http://forum.xda-developers.com/showthread.php?t=300248
PQz version up
Hi all,
I uploaded new PQzII.exe for Hermes.
http://www.nicque.com/pqz/PQzII.htm
2007-04-21 0.0.7-4 [Bug fix] PQzII_20070421_0007-4_Hermes.zip
*) Jog wheel (Volume Down) bug fix while calling.
Please try it and let me know if you find any trouble.
cheers,
tom
*)Edit
if you use "0x76" as any function. It has been changed to "0xAA".
There are some Hermes devices as like DoCoMo hTcZ/Softbank X01HT have "MOJI" button.
The button outputs "0x76" but it could be a cause of Jog wheel problem while calling.
as for me, I used 0x76 key code for IME on/off. and changed to "0xAA".
if you don't use 0x76 you don't need to care about this.
cheers,
tom
Greetings all, Wonder if anyone can help on this one.. we supply mobiles (Orange M600, O2 Orbit and HTC 3300 currently) with our delivery driver software on , this software interfaces with TomTom (currently 6.030) to route drivers to destinations , when the unit goes into suspend/sleep mode (ie the power button is pressed) and then woken up (power pressed again) tomtom minimizes itself and anything else thats running at the time ie our software, anyone know how to stop tomtom from minimizing or how to stop it from taking everything else with it - contacted tomtom support who are (unsurprisingly) a waste of time.
I think tomtom minimises itself by design when you press a softkey or power. for instance whilst navigating if I want to check my email I hit end call and it brings to today screen up.
only thing I can think of trying is in today settings switching off today timeout.
don't think buttons are configurable in tomtom.
hope this helps.
thanx 4 the response - unfortunately this won't sort it - the users will inevitabley press the powerbutton when using the device and this just minimizes everything when power is turned back on - if tomtom isn't running at this point there is no problem.