Hi guys,
I tried a few things to make it happen, but I think I'm missing something to let it work.....! :?
I mean: I'm connected via USB to my laptop, my laptop is connected to the internet..... there should be a way to let this bloody S100 to go trought! I tried a few things with WModem but....
any help/idea is appreciated.
Ciao
L :wink:
Hey guys that was easy!! :wink:
I can answer by myself to this..... JUST CONNECT USB CABLE, START ActiveSync and....surf the internet (of course the PC/laptop must be have any kind on internet connection up and running!)!! :wink:
Thanx 4 the effort....... 8)
will someone please help me in configuring active sync over bluetooth..
i want to connect my jasjar with my pc over bluetooth.
when i search in the bluetooth of my jasjar the computer is shown in the devices but in the service there is no activesync
Hi I was puzzled with this the other day. I found that if you open ActiveSync and click Menu then Connect via Bluetooth. It worked fine then.
Hope this helps
B
Before you can connect, you need to make sure your PC has a bluetooth com port. Then in ActiveSync, enable connection via that com port.
Once that's done, you can use the connect via bluetooth on activesync on your ppc, and you can choose your pc.
I've bought today a Qtek S200.
IPL/SPL: 2.09.0000
GSM: 2.07.20
OS: 2.9.7.28
The first I did was a Hard Reset to the Qtek S200 and then...
Because of the problems with some application and antivirus I did a complete format to my computer. I just installed WinXP PRO SP2, all the updates from Microsoft Update, .Net Framework 3, Outlook 2002 and ActiveSync 4.1 (both came in the CD from Qtek). (I have also disabled Windows Firewall).
Then I think, I've done all the steps right (I think):
1) I connected the USB cable to de PC
2) I tried to plug the USB cable to the Qtek S200 when te PPC was OFF and nothing happened. Then with the Qtek S200 ON (in today's screen) I plug the other side of the USB cable and ActiveSync does not recognize my S200.
I dunno what to do to make ActiveSync syncronize with my Qtek S200, could you please help me???? I've been trying to syncronize for more then 6 hours (doing all the stuff...)
THNX,
Annita
Try this:
remove your activesync (de-install the software)
reboot your pc
turn on your qtek without the usb cable attached
plugin your qtek on the usb cable.
Does you pc find the device ?? (ding dong sound)
yes ? good, your pc finds it.
take out the usb again
install activesync 4.2
http://www.microsoft.com/windowsmobile/activesync/activesync42.mspx
try again, and see if it works.
My PC does nothing when I connect the S200...
Annita
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Annita said:
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Click to expand...
Click to collapse
It might work, however I would first look into why you usb doesn't work
when you plugin the usb cable, do you see the phone charge ? (led ontop change to orange) you might have a bad cable or you pc has a problem with the usb port (have your tried another usb port ? or removing all usb devices and only using the phone cable ?)
Yes to all.
When I connect the USB cable, the Qtek begins to charge the battery, and the orange led flicks.
I have tried on my PC and on my Laptop and didn't work in any of both.
I have tried with only he USB phone cable and did not work either.
Anyone has tried to update ROM via Bluetooth???
THNX,
Annita
Annita, make sure you have DHCP turned on on your PC. The virtual USB NIC should come up as 169.254.2.2, I believe. I was never able to get it to work without using DHCP on the PC side.
What is the virtual USB NIC????
Annita
When you plug in the USB cable, the PC creates a "fake" network adapter for the PPC and adds that to your list of network connections.
Just make sure DHCP service is started. Right-click My Computer -> Manage -> Services and Applications -> Services -> DHCP Client.
OK, the service was and is ON.
The thing is that I can syncronize via Bluetooth, but not with the USB cable (and I have the original cable and another mini-USB cable).
Annita
Bluetooth Activesync Sycronization will not work b'coz while upgrading, the phone resets itself, N it powers on in the upgrade process therefore, bluetooth of the phone will not be available then.
So, I dont its possible 2upgrade via bluetooth Activesync.
OK, thnx.
Annita
anita and the usb
anita, go to start setting control pannel, go to phones and modems and see the modems are installed there. windows (sh***t) store all the garbadge possible. can be that it identfy usb device like usb modem and put it on com 1 not that active sync works auto on com1. so check connection settings on activesync. + which use port you use? fron pannel or the rear of the PC?
is that a laptop if yes what model.
i'll try to help as much as i can
xman
ok, i have the same problem as you do, or at least a similar. i cant get my sync to work...
active sync 4.2
active sync says "critical communication error, try restarting your device", the active sync troubleshoot tells me that i dont have a ip adress (the link to microsoft does not work), although i have a network connection that my pc created (169.254.2.2). the active sync even appears in green.
my firewall and the win firewall does not interfere with this. switching off the firewalls does not improve this at all.
does anyone know a solution to this? thanks
I'll try what xmanmaster says, but I'm not at home until sunday...
Thnx,
Annita
Did this problem ever get resolved? I have the same issues, tried a wizard and a hermes. Not detected as a usb device, the charging light comes on. Both phones work on another PC. I have tried uninstalling activesync and rebooting phone/PC in every order I can think of.
UPNP (Universal Plug 'n Play) service is required
Hi all,
please make sure that the UPNP service is running on the desktop.
It's required for device detection as well as synchronisation with the WCE device.
A quite detailed description of all potential problems with ActiveSync can be found at Chris De Herrera's website.
BR,
N.a.D.
I don't know why i cant. I can connect internet through usb activesync.
Before, my O2 Atom, Hp 6828 and dopod 838 pro can.
I tried hardreset but i still have problem.
Anyone have problem?
PS: Dopod D810 Chinese
Create incoming BT port on PC.
Set Activesync on PC to allow connections to that port.
Open up PPC, pair with PC (while NOT connected to USB), make sure ActiveSync service is available on the device.
Remove all proxies from PPC connection settings.
Turn off firewall on PC (just in case).
Connect to PC via BT from PPC ActiveSync. It should work.
thx first
already follow your step, still cannot
my D810 can do bt /irda activesync, only cannot connect internet via bt activesync/irda activesync
i tried bt activesync in my destop and irda activesync in laptop, both have problem~
can anyone explain how can i connect the mobile through internet via usb cable? on pc I have connection. i need on mobile. waiting for a reply. thanks
After you installed ActiveSync it should work automatically when ever you connect the WIZ via USB cable to the computer - at least it works on mine! No further steps necessary, except turning off GPRS and WLAN.
for my phone it doesnt work like that i think i have to make some settings or something..
i resolved the problem. i needed to add
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000