Hello
Can someone help me pleaseeeeeeeeeeeeeee
I left my MDA compact in the car for a few days, I just used it for sat nav, however I think the battery died in the 4 days that I forgot it there, now it wont come on properly, have tried charging it but it just displays when turned on the TMobile logo and then
IPL 1.12
SPL 1.12.0000
GSM 01.12.20
OS 1.12.2.23
Then just stays like that... I have tried reset but it doesnt do anything it just stays like that, would a software update fix this please just in case the firmware has been damaged or something??? how would I do a firmware update, lol, sorry im new to the forums
Related
Hello-
I use this phone for my business and was having problems with it, nothing major just some software issues so I was going to bring the phone back to factory standards and decided to download and install the ROM from HTC’s website and the install went to around 95% and then I got an error message saying “this nbf file cannot be used for your pda phone, please check your nbf file” and then the install said to quit. My phone/pda was frozen so I had to remove the battery to get it to turn off. When I turn it on, I get a Red, Green, Blue and White screen that says IPL 2.25.001 and SPL 2.25.0001 and RUU on the top right hand corner. I have tried a hard reset, soft reset, and removing the battery but it won’t get past this point. I cannot afford to be without this phone as I use it for my business and until it’s fixed I am out of commission. The phone was bought brand new in December of 2006. Any help I can get would be appreciated.
Your IPL and SPL tell me (2.xx.001) that you have a G4 phone. Make sure that you have a G4 version of the ROM and try the flash again. I hope this helps ^_^
EDIT: By the way, questions like this should go in the upgrades forum.
There´s a fix dont panic!!
golfernutnflorida said:
Hello-
I use this phone for my business and was having problems with it, nothing major just some software issues so I was going to bring the phone back to factory standards and decided to download and install the ROM from HTC’s website and the install went to around 95% and then I got an error message saying “this nbf file cannot be used for your pda phone, please check your nbf file” and then the install said to quit. My phone/pda was frozen so I had to remove the battery to get it to turn off. When I turn it on, I get a Red, Green, Blue and White screen that says IPL 2.25.001 and SPL 2.25.0001 and RUU on the top right hand corner. I have tried a hard reset, soft reset, and removing the battery but it won’t get past this point. I cannot afford to be without this phone as I use it for my business and until it’s fixed I am out of commission. The phone was bought brand new in December of 2006. Any help I can get would be appreciated.
Click to expand...
Click to collapse
It happened to me last night and for a moment (actually several hours) I though I had a dead phone, then I tried another ROM and even when it went all the way up to 100% progress the tricolor screen didn´t dissapeared, then I tried a 3rd ROM and this one worked, it went all the way and the phone finally booted. Check the Wizard G4 forum on this subject.
Look here to see my story:
http://forum.xda-developers.com/showthread.php?t=289948
Look here the ROM that is suitable for you
http://forum.xda-developers.com/showthread.php?t=289469
I got it fixed by using the Wizard love rom. O had actually read your posts after I had gotten it fixed, what a nightmare! I was ready to box it up and sell as is on ebay!!!
Cingular 8125
Rom Version: 2.26.10.2 WWE
ROM Date: 6/7/06
Radio Version 02.25.11
Protocol version 4.1.13.12:
Hope I am all up to par with this phone, I got everything re-loaded and all is working great.
Thanks for the reply and sorry I posted it on the wrong forum, I am new here to post, I generally just read.
Hey guys,
A friend told me to instal the new wm6 rom on my mda vario. I downloaded the rom but i forget to CID unlock it. When i start my mda i only see the tri-collor screen with:
above: IPL 1.06
in the right upper corner: RUU
a little above the middle: SPL 1.06
When i connect my mda with my computer my computer recognises the mda, i hear a tone and usb apears on the mda but active sync doenst show the connection
My problem now is:
I cant start the mda, i think i lost my old roms and the mda is useless now.
Please folks try to help me i realy need this mda for my work and im hopeless without it. When is start the MDA i just see the screen and i cant do anything but looking to that screen. the touch screen doesnt work and the keys neither.
Is there a solution to CID unlock my mda or to connect it with active sync so i can get in the folders or something and then install the older roms or so.
PLEAZ GUYS!
Thomas,
Thanks.
tommygreece said:
Hey guys,
A friend told me to instal the new wm6 rom on my mda vario. I downloaded the rom but i forget to CID unlock it. When i start my mda i only see the tri-collor screen with:
above: IPL 1.06
in the right upper corner: RUU
a little above the middle: SPL 1.06
When i connect my mda with my computer my computer recognises the mda, i hear a tone and usb apears on the mda but active sync doenst show the connection
My problem now is:
I cant start the mda, i think i lost my old roms and the mda is useless now.
Please folks try to help me i realy need this mda for my work and im hopeless without it. When is start the MDA i just see the screen and i cant do anything but looking to that screen. the touch screen doesnt work and the keys neither.
Is there a solution to CID unlock my mda or to connect it with active sync so i can get in the folders or something and then install the older roms or so.
PLEAZ GUYS!
Thomas,
Thanks.
Click to expand...
Click to collapse
you should be in the Wizard Upgrading, etc. thread.
You could be in 1 of 2 possible situations:
1. Your phone was a G4 and you flashed G3 bootloaders into it and now it is a fully fledged brick. (hope this isn't the case, but this happens when people jump in and don't read first)
2. Your battery is probably dead. You should have read before you jumped in. Have your friend recharge your battery since they seem to know so much about what you should be doing with your phone. If your friend doesn't have the same phone and already completed these procedures then you shouldn't have been listening to them in the first place. If you can't get your battery charged this way then you will have to buy one from a store that sells the phone or on ebay.
you will need to re-flash the button rom and complete the unlock. Then make sure you DO step 17 BEFORE you flash your WM6 rom or you will still be in a world of crap.
If you don't know what I mean by step 17 then go to the forum I mentioned above and look for a thread near the top that is Tagged with [READ FIRST]
Read that and you will be good. You need to talk to your friend and make sure that the next time they "help" someone they make sure to give them ALL of the information they need before they start trying to turn their expensive toy into a plastic paperweight.
Hi @ll
I tried to flash my rom with the Windows Mobile 6 Rom but after the flashing was finished before the hardreset the phone got disconnected by an accident (my fault). Now it hangs at the bootscreen and when i try to hardreset it just says "Format is failed" and continues with a hanging bootscreen.....
I've no idea what to to, tried already different roms (WM5 and 6) and the RUU_NoID with the latest T-Mobile Rom....
I've no idea what to do, pls help
Michael
PS: MDA Compact II, Charmer, Worked fine till the accident, bought Dec 2005
http://forum.xda-developers.com/showpost.php?p=1340773&postcount=32
that was the tool i mentioned with the RUU_NoID ... tried that already, nothing happened still failed
€: maybe i'm using RUU_NoID wrong, somewhere a trhead with a description?
Have you at least read the whole post? What was the RUU_NoID? I dont even know what you are talking about at this point.
6. I found a link about using a ‘no-id’ version of RUU. Using this I flashed the original Tmobile ROM from bootloader & the MDA reverted back to IPL 1.12, but the SPL stayed at 2.20. The MDA would not boot, but after a hard reset the FAT formatted
Click to expand...
Click to collapse
so that program i've used...
hello i am having the same problem now i have a bootscree with ipl 2.06
Spl 2.06.0000 GSM 02.18.21 OS 2.6.2.27
and nothing else///this screen shows and this don`t go any further.(please help because i have no phone and i need it and in our conrty there is noone can help me)
Hello guys,
I took the chance to ask for help in this excellent forum for first time. I was given a prophet jamin from my work which wasn't repaired and i decided to search the internet for any possible solution and i noticed that maybe i could fix the problem.. So here's the solution! When i turn on the jamin i get first a white screen with the logo of htc and then a blue screen with the following numbers:
IPL: 0.49
SPL: 2.13.0000
OS: 2.13.9.23
and some other times i get the above numbers plus a gsm number like GSM 02.07.28FA3CD98
I tried to bootload it with the reset button and the camera button but nothing happens..I have all the wires and the drivers in the box but i haven't used them yet
Finally, this is my request for help so i hope to work it out with your help
Cheers..
Hi,
I have a problem with my vario, that i bought this week. It came with Tmobile CZ ROM With IPL SPL 2.21. I followed the tutorial and downgraded by flashing Button ROM. This flashing failed on 99%, so i downloaded XDA Mini S ROM which also failed on 85%... several times.
I think the problem is in bootloader, becouse when i turn Wizard on, Bootloader came on but after a 5 seconds in shuts down I thought that it is a battery problem, so i charged wizard over teh night(it was still in bootloader mode, i cant boot to Win CE :-( )
Today i tryed to flash wizard_love_ROM, I connected wizard to pc via usb, flashing started but after 3 minutes wizard shuted down and repeately rebooted. Flashing ended with error 302... Now I have IPL 1.05 and SPL 2.21
Can any1 help me to get my vario back to business? pls
thx for help,