I tried to upgrade the ROM, and it got stuck on radio upgrade. than i unplugged the usb and did the bootloader again. now it is showing me the blue imate screen only with red
NO GSM
D 1.30.82 WWE
Computer cannot detect my phone anymore!!!
Please help me!!!
Hi @ll
I tried to flash my rom with the Windows Mobile 6 Rom but after the flashing was finished before the hardreset the phone got disconnected by an accident (my fault). Now it hangs at the bootscreen and when i try to hardreset it just says "Format is failed" and continues with a hanging bootscreen.....
I've no idea what to to, tried already different roms (WM5 and 6) and the RUU_NoID with the latest T-Mobile Rom....
I've no idea what to do, pls help
Michael
PS: MDA Compact II, Charmer, Worked fine till the accident, bought Dec 2005
http://forum.xda-developers.com/showpost.php?p=1340773&postcount=32
that was the tool i mentioned with the RUU_NoID ... tried that already, nothing happened still failed
€: maybe i'm using RUU_NoID wrong, somewhere a trhead with a description?
Have you at least read the whole post? What was the RUU_NoID? I dont even know what you are talking about at this point.
6. I found a link about using a ‘no-id’ version of RUU. Using this I flashed the original Tmobile ROM from bootloader & the MDA reverted back to IPL 1.12, but the SPL stayed at 2.20. The MDA would not boot, but after a hard reset the FAT formatted
Click to expand...
Click to collapse
so that program i've used...
hello i am having the same problem now i have a bootscree with ipl 2.06
Spl 2.06.0000 GSM 02.18.21 OS 2.6.2.27
and nothing else///this screen shows and this don`t go any further.(please help because i have no phone and i need it and in our conrty there is noone can help me)
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
i flashed me wizard with a new rom and it anit my first time and it worked great but just for one day after that day my wizard shut off i tryed to open it but it never prossed after the splash screen so i trid to reat the factory defolt but it says format error so i dicided to flash an new rom thro the bootloder screen coz i thought that i had a rom colabse so i flashed several roms but every time same thing habens the rom is flashed the wizard startas but nothing happen except the sblash screen and it dosn't prossed opning but the splash screen changed but stilll the same os , ipl and spl
plz some body help me plzzzzzzzzzzzz :'(
i-mate k-jam g4
Last night I flashed my MDA Compact II with a ROM in this forum. The ROM update seemed to go okay, but now the Charmer won't boot. All I get is the splash screen, which says:
IPL 3.08
SPL 3.08.0000
OS 4.0.0.0
I get no charge indicator light when the phone is plugged in (power or USB). Does anyone know how I can fix this or why this is happening?
Hi
I have the same problem too. I just flash back the original t-mobile flash and it's ok again. But whenever i try to flash it again it hangs on the boot screen again. So if you want it to work just use an original T-mobile flash and it will be ok again
Venom
So but it does not discover ROM at original even fix-up me. But computer sees.
It receives messages at each start-up with errors RUU
It can high wines (blames) CID
Try this, to bring charmer back to life.
This metod don't work.