Related
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
which is your device,post full data of your phone,IPL/SPL...? Make...?
As you say you installed through Shelltool,is it a G4 DOC chip version ?
You say it's stuck at the splash screen with ipl/spl and gsm version,which splash screen,is it OS (Rom) initial splash screen or a Bootloaders (Multicolored) screen ?
Secondly ,try to get it into bootloaders (multicolor) screen,if it gets into bootloaders,connect it to PC via usb cable,check small usb appears at the bottom of the bootloader mode in the phone,if it does,than flash a carrier's official Rom to recover back to it's default status.
Good luck
Try the Button's ROM (which is in Wizard Upgrading subforum). Then unlock it again (It may be causd by a fake CID unlock when you try to unlock when IPL/SPL is 2.xx)
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
alldoe said:
My current
IPL/SPL 2.24
GSM 02.25.11
OS 2.24.10.1
I have G3, but I was using ShellToll because I can't install by RUU file.
My Wizard stuck at ROM Splashscreen, i can get into bootloader screen, but when I flash any ROM, everything upgrading well but after Reboot it still frozzing at Splashscreen. I was tried Button ROM sometimes but it doesn't work, I have CID unlocked by Imei-check.uk and everything is okay, I can install ROM from G3 and G4 chips. And ... I remember, that before CID Unlocking my IPL and SPL have different value.
PS. I was unlocking my CID, after my Wizard bricked.
Click to expand...
Click to collapse
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
luoluomeng said:
You can download this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe on XDA,it contains IPL/SPL 1.01,and upgrad this rom,then you'll find your IPL downgrad to 1.01,and SPL still is 2.24,and then,use aWizard tu unlock your CID,after this,your CID should be unlocked,you can use RUU upgrad any rom you want.
I just do this yesterday,my CID isunlocked now.And RUU now works on my device.
Click to expand...
Click to collapse
Hello! I have CID unlocked. When I install Button ROM my IPL and SPL is the same (1.01). Every RUU works but It still frozen. 2 Days ago i found on other forum this advice:
INSTRUCTION :
1. miniSD - formated in PC - FAT format (now FAT32 !)
2. Wizard On and Bootloader (press reset and keep photo button let go reset) 3 color display. Put in card to Wizard.
3. Connect USB - PCC to PC
4. Launch MTTY 1.42 (my ver.) with USB connection
5. Write command - r2sd os end press enter
6. Program it will record OS on miniSD
7. After recording make Hard Reset or turn on Bootloader
8. On Display should be written - Format partition ?? (5 sec.) - to confirm press Voice dial button. If inscription it will disappear repeat point 7.
9. If Format partition successful wait OS is write. Done.
10. Draw out miniSD
11. Make Hard Reset
12. Enter in bootloader
13. FOR NON CID WIZARD - Flashing Wizard RUU (must be proper version) - ERROR 300 is bad RUU ERROR 266 turn off Wizard and turn on connect to PC
14. With CID (for example CID G4) seek forum for flashing Wizard with CID G4
My Wizard it lives
Click to expand...
Click to collapse
I was carry out all command step by step, and after flashing proper version Orange ROM my Wizard woken up, but today my Wizard get stuck again and now this way don't work, and I have to find a new method to rescue my PDA.
My Wizard woke up! I find ERA PL ROM (RUU_Prodigy_3829_382130_027111_TMO_PL_PLK_Ship) which flash excellent and working, but now I have a new problem. I can install other ROM after that but none of them work, every stucked at Splashscreen like before.I need to find some WM6 ROM which will working? Someone have some suggestion?
alldoe said:
Hello!
I have strange problem with my Wizard. 4 month ago i was trying to install Pathfinder 1.2, but when I installing this ROM using ShellTool my PDA bricked. Now all the time it's frozen on Splashscreen with IPL/SPL GSM and OS information. All HR completed without any errors and all ROM's upgrading finish correctly.
Once time, after 2 months for breaking, my Wizard just started and working very well, I do 2 HR and few SR and my Wizard still working good, but when I shut it down and pull out battery my Wizard again frozen and until now can't wake up. I have CID Unlocked by imei-check. I tried to install many different ROM's, e.g. Wizard Love, Dopod (CHS), T-Mobile, Orange (PL) but nothing work. I also tried way with SD Card but my ROM's doesn't work, I think I need some working dumped ROM. I was searching help on few forum but poeple on polish forums don't know how to help me. May someone here have idea where can i find working dumped ROM or have any other idea how can i fix my Wizard?
Thanks for any help
alldoe
PS Sorry for my english
Click to expand...
Click to collapse
i have the same proplem but i have a g4 wizard and it's not cidlocked tell me plz what to do plzzzzzzzzzzzz :'(
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
Hi Profs,
there are some problems with a Artemis Update SPL (USPL) v.01. I've found this problem is several topic but there was no solution for it.
#1:
http://forum.xda-developers.com/showpost.php?p=1739577&postcount=413
#2:
http://forum.xda-developers.com/show...44#post1745844
#3
http://forum.xda-developers.com/showpost.php?p=1713596&postcount=1
The problem:
use USPL to get rid of the CID....count goes up to 100% screen shows black with green text, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use win XP.
i even tried without memory card and phone card....and nothing seems to work.......
ipl 1.14.0001
spl 1.14.0000
gsm 02.07.90
os 1.14.0.0
Who has any clue...?
With other words:
I've just got back my P3300 from repair, they changed the main board. With the previous main board I was able to upgrade the device and I was using the B&B versions.
But with this new board I'm not able to upgade the SPL. When I try to upgade the device after and start the start_uspl .exe the 10...20... ....100 my device become an interresting "blue screen" status and only the reset help to get out from this status. If I start the RomUpdateUtility.exe after the upgrade I got the error message #270
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
ExtROM version: 3.12.405.102
This is not the solution for the problem. I've tried it:
Plug in USB cable. Hold voice recorder button and press reset button. Bootloader will appear (Three color stripes). Then you may flash up ROM. (This works only for RUU installation types, not for PDAmobiz modified installator) Original english HTC P3300 ROM you may download form here: http://wiki.xda-developers.com/index...temis_Upgrades ....
Please help us to solve this problem....
Probably the same problem
This should be the same:
Hello POF,
I was directed to this link by Rudegar because I want to change the french ROM to English ROM.
The relevant data of my PDA is:
The version of the ROM: 1.14.406.1 FRE
Date of ROM: 9/27/06
Radio version: 02.67.90
Protocol version: 4.1.13.28
ROM extension version: 1.14.406.101
I tried exactly the way you described in the USPL_manual and everything went well till I got to a stage where I was asked to click the update button which I did. After then there was a window which showed "updating from current version to version 9.99". I was confused at this point but clicked "continue" and after this stage I got an error message and there was no longer a connection bw my PDA and my computer.
Thanks,
Jonat
Reply With Quote
http://forum.xda-developers.com/showpost.php?p=1784337&postcount=430
Also the same
Problem "lost connection PDA-PC"
Hi,
first I would like to thank you for goooood job to many people here !
Back to my problem. I have HTC Artemis (T-Mobile MDA Compact III), OS WM6 T-Mobile Czech version.
I ran start_uspl.exe on my computer. The part in DOS based screen seems to finish everytime OK, but finally the connection with PC is lost. Therefore when the PDA Phone ROM Update Utility starts cheking version the error "lost connection with PC" appears . PDA stay in "black screen" mode and only hard reset start it again as usual.
Does anybody have the same problem? Any idea, how to solve it ?
Thanks
http://forum.xda-developers.com/showpost.php?p=1773030&postcount=426
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
lenocs said:
then pops to white. I need to do a soft reset to get it running again.
Click to expand...
Click to collapse
What im saying is when it pops to white, dont soft reset it, just start the upgrade.
Anthony2oo5 said:
When the screen goes white, don't restart. Just start flashing to the new ROM. Worked for me
Click to expand...
Click to collapse
that what i also do When the screen goes white, don't restart. Just start your RUU
lenocs said:
Unfortunately it not a white screen, it a black one, connenction lost with the PC, and only the reset PDA helps to restart the unit again....
Click to expand...
Click to collapse
Same situation as above. Depending on the Artemis, the screen might go white or black. Just don't freak out and keep on flashing the USPL. It WILL work and then reboot. Then you can flash the actual ROM you want.
Hello from an absolut newbie trying his first upgrade,
And I have just experienced the same problem than lenocs.
I have run start_uspl.exe, but when the screen is suposed to become white or dark, it becomes dark and the artemis is in fact totally off and connection is lost.
Anyway I supossed that it was because the scrren got black and I tried to run the update utility, but I´ve got an error (the terminal is disconnected or similar) and nothing happens.
I have had to soft reset the terminal and fortunatelly it seems that I still have my previous ROM and it seems that it works. But, do you know if there could be some "side effect" because the first step of start_uspl script?
Anyway I would like to move to WM6, so, any suggestion would be really appreciated.
Thank's a lot
When you restart, what is the USPL number?
Ooopppssss!
I didn't pay attention.
As I've said, I'm a newbie, so I was just woried because I thought I had "bricked" my new atemis.
How can I know now the USPL number?
Anyway I tried the star_uspl again (I'm a crazy newbie) and it failed. The artemis went off almost inmediately.
Thank you very much for your help
SpiggyTopes said:
When you restart, what is the USPL number?
Click to expand...
Click to collapse
solved ... at least for me
I think the problem is in SPL version 3.13 (or maybe anyone newer than 1.11).
Try different Artemis USPL - for me worked version from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_DumpedRoms
It's very confusional, because file sizes and also dates are the same as in unfunctional version, but this one worked.
Hope it'll help you as it helped to me.
Maybe this can help you
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Rocheau said:
I bought a 8gb card the week before, so I needed to update the rom in order to have my new SDHC working. But whn I was trying to update the rom, through UPSL 1.1, I had an error. This was the first time I had an error because I have modified the room many times before. My error was about a CMD.EXE issue, something like Error code line 26 "can´t spawn cmd.exe" so I was not able to change my rom. What I did was to copy CMD.EXE from Windows/System32 and put in the same folder where I had the start_uspl file, and finally works!
Do not ask me why, but this was the only way I could make works the update process.
Just try.
Click to expand...
Click to collapse
do u have ur card in the phone while updating
you are suppose to remove the card
Problem solved (for me)
Hi,
i had the same problem error 270, 3% and lost connection with Activesync.
IPL: 3.13.0001
SPL: 3.13.000
GSM: 02.94.90
ROM version: 3.13.405.1.WWE
ROM date: 8/28/07
any way to upgrade was wrong ->> error 270
My good way was:
1. Downgrade to WM5 - original shipped ROM 1.12.405.1(link found on Wiki pages)
2. Under WM5 run USPL to unlock CID (now without any errors)
3. Final STEP - Upgrade to new ROM Artemis Touch 3.01 (without any errors by upgrade)
))
Now my Artemis seems to be OK.
I ran USPL with storage card inside the device...
no problem
switch SD card back to 2GB or smaller before USPL
Hi,
for me USPL did not work with my SDHC 8GB card but then I switched back to my previous 2GB SD card and then it works.
Perhaps the SDHC driver blocks USPL in some way.
Cheers,
Markus
i have been trying for 3 months
once i have upgraded my artemis to wm 6.0 everything seemed to be OK for two days... then the screen started to go black when i restart... şi downgraded to 5.0 but nothing changed... when i remove battery for a while, my arte works... when i try to do anything with it, the screen slowly goes black as if it is broken... please DO HELP ME! i am going to go mad... i have a new iphone, ihave i kaiser as well... but i miss my artemis very much...
Hello:
I have the same problem and realized hundereds have too. I have been checking in all forums and no asolution to it
The issue that happens to me is that I used USPL for upgrading to WM6 and worked, but now for the Touchflo it does not. Tried with all USB ports, tried with different computers and no good news.
The USPL msdos screen indicates that there is no connection at all in all percentage levels, then it bocomes dark and the 260 error whne installing the rom.
please help us soon !!!
we are in trouble!!
Same Problem : Screen shut down
Anybody can help us on this point ?
The only way to solve it is to remove the batterie during 30 min., then put it back and pray...
Then, for no reason, the screen shut down, a few minutes or days after
I've upgrade from WM5 to WM6 with the original Rom of HTC, it seems a little more stable but it shut down every 2 days when i'm lucky
Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?
Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...
You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.
Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update
First of all I am so sorry to bother you all!!!, as I can see from 3 days of non stop reading here and e;sewhere, its not always liked to ask questions, but I am sorry I really need help!
I bought a 8125 cingular from eBay (bought a x01ht but it hasnt arrived)
I have read seriously so much I am now confused! But I have tried to research this 100%
when I got the phone yesterday, I first sim unlocked it with the "All HTC" unlocker.. then I used unlock ext rom wizard, and Likiwiz02 for the cid.. I did see it say "your phone is superCID" unlocked or what ever...
I then tried to flash with x2h_wm 6.5 and it went through the steps like it should and finished and said your rom is updated, BUT when the phone rebooted, it was like it went DOWN not up.. I lost alot of things and now it said G not E for network, I had less signal, and had the roaming Icon. Well, after that My XP computer would no longer recognize the device.. I would plug it in and it would charge, and the active sync tries to connect but after a few minutes it says it can not connect.
I am able to "sometimes" connect top my Vista" device, BUT I have not yet mastered being able to flash a rom with Vista... as I always get RUU is closing, because of error.. and it leaves my phone in bootloader RUU mode, so i have to reset it. I have tried the instructions here http://forum.xda-developers.com/showthread.php?t=291723 and One time I was able to get pretty far without an errors from RUU, but it said I needed a newer version.. or something, and after that I am unable to do it do any RUU on vista, although most of the time I can get it to connect by going to the services- and restarting wm 2003 thing"
This is the details of my device (and yes I know is a G3)
IPL & SPL :2.25
gsn: 02.25.11
os: 2.25.11.1
Ext Rom: 2.25.11.102
Radio: 02.25.11
Rom 2.25.11.1 WWE (build 14928.2.2.0)
protocol ver: 4.1.13.12
My question is.. What am I doing wrong? How can I get either XP to connect, or Vista to run RUU?
Can I flash by sd card.. ( I have seen both yes and no, and am confused on how to do it)
Tweeks I have done is installed a cab to remove roaming icon, reg. changed the G to E for Edge... Speed it up bu changing mem. and I think that's pretty much it!
Scream at me and call me stupid, BUT Please help me.. There are 10000000000000 different HOW TO all over the place, and all are different, and I really just would like a little PERSONAL help from someone..
THANK YOU SO MUCH!!!!!!
Tony
Also.. On the Activesync issue.. I have uninstalled and delete all tracers on my xp laptop and reinstalled both the newest version , and when it did the same, I uninstalled and reinstalled an older version... Still the same!
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
best thing is to start with reading the wiki
Read it over and over...
I am not just saying it when I say I have searched and searched!
UPDATE
Although I received no answers, I thought I would upddate... I am so embarrassed, as the active sync was an easy fix.. (disable Firewall) I cannot believe it is that simple, as it was working fine before with firewall..
Ok I am following the instructions now flashing with XP button rom, etc etc.. Will follow up later!
Ok progress!
Well, I was able to flash to phone to button rom, and then CID unlock it with lokiwiz, but My IPL and SPL are different. SO i flashed button rom again, and its still the same... Can I go ahead and flash back up, or what do I need to do?
IPL 1.01
SPL 2.25
tlbaker78 said:
Well, I was able to flash to phone to button rom, and then CID unlock it with lokiwiz, but My IPL and SPL are different. SO i flashed button rom again, and its still the same... Can I go ahead and flash back up, or what do I need to do?
IPL 1.01
SPL 2.25
Click to expand...
Click to collapse
If all was successful your good to go.
And yes you can flash back up.
I am so ANGRY... I got to 100 % and my cat hit the cable and Now its stuck in RUU... I am looking for a fix.. ANY HELP PLEASE?
OK... got it going again... flashing back down to button, the only one that would connect.. and I will build my way back up...
Sorry for posting so much.. and thanks for the help!
I have flashed to T mobile 2.26.10.2 , IPL/SDL are both 3.08 And I have tried several times to go beyond WM5.0 but It never loads.. Any advice...
Thanks
Connect the phone to the PC and run Wizard Service Tool and press Enab. RAPI + Unsigned Apps button.
Then press CID Actions Button and Read CID block, this will tell you if your CID unlocked.
Well, I will try that, BUT I am assuming since I have a Tmobile ROM on a ATT phone its no longer unlocked???
When I ran the unlocker it said it was now SuperCID unlocked or whatever..
I will do the Service tools and see.. and Post back soon! THANKS
It is locked!
OK.. I ran the tools and it said it was CID locked... this was the results (not sure if usefull or not)
Checksum : fb67d2a2
CID: WIZCNG01
Its funny because when I ran the other lokiwiz it said it was unlocked..
I tried to unlock it and it said downgrade SPL to 1.06 or less.. AND thats the problem... When I Loaded Button rom the 4 different times I have had to flash it.. THE SPL never changes down.. One time I flashed it, I repeated it 3 times as per some instructions i seen that if you flash it again it will change.. NOPE did not change, the IPL always changes, BUT SPL stays the same.. SO If I flash again, this is the results SPL 3.08 IPL 1.01
Can anyone help me .. maybe use a diffrent rom instead of button?
HELP PLEASE!
THANKS
Have you tried to go back to the original ROM?
Problem solved
I am still tinkering, and adding patches now... BUT I was able to get wm6.5 (VERY SLOW ON MY WIZARD) so I went back to button rom, and installed XDA Mobile 6 Release 5 ROM, and I LOVE IT!!! like I said I am still adding stuff and playing with it, but so far its better than WM6 I have on my Cheetah (treo750)...
I will add the steps I took , and trial and error steps, so other people that are impatient and ask questions like I did, will know what to do.,.. BUT let me play with my new toy for a while!!!
One question.. Should I stay with IPL/SPL 2.26? Or should I go back up to 3.08 or ?????
Thanks