Database Users

Request for application - Email notification

As discussed in this thread:
http://forum.xda-developers.com/viewtopic.php?t=41403
the new push email feature coming with the AKU2 update has what I believe to be a fatal flaw in that it does not seem to be able to wake the device up and notify the user when a new email arrives. So long as the device is not in standby mode, the notifications work fine but when it goes to sleep or the top power button is pressed, you lose the email notifications. My workaround is to turn off the automatic device off feature in the power settings and use AEButtons Plus to turn off the screen (the entire screen, not just the backlight) when I am not using the device. This is certainly not a perfect solution as there are times when I forget to turn the screen off or when a calendar or task notification turns the screen back on when I am not around the device (in this case, the backlight will time out but the screen will stay on until I turn it off).
All that is long-winded background for a request to the programmer types around for an application to solve this dilemna. I think the application would be quite simple and would simply provide for an automatic screen off feature after a certain period of inactivity. Ideally, this application might also be able to remap the power off button to turn the screen off as well, but this might have other negative consequences. Of course an application that would wake the devide up on receipt of a pushed email would be even better but I am giving MS the benefit of the doubt that such a feature might be difficult if not impossible to pull off at this time. There may be such an application out there right now, but if there is, I have not come across it.
I am sure there are few people that would be willing to pay for an application of this nature. Anyone?

Phone-likeness of TyTN?

Gday TyTN folk.
I have an iMate PDA2k and am thinking of moving to TyTN, but being a bit frustrated with my current unit I'd like to know whether TyTN makes a better phone than BA does.
My specific botherments are:
- notification light (green/red/orange) where the functions over-ride each other. e.g. if I miss a call while its charging, it starts flashing red, but then it completes charging and goes green. Actually, even if it's not charging it seems to stop flashing red after a while. I want it to keep flashing red until I actually handle the device and should have noticed.
To me it makes more sense to combine the bluetooth light with the charge light, and leave the phone notification as a separate item.
- notification icon space in start bar. Currently it's ALWAYS showing a multi-message bubble icon (I'm always in CDMA 1x coverage, and also have an app running that puts its own notification icon up) so I don't see a new one for SMS or voice message. It looks like the best answer might actually be a 3rd party start-bar app, but still.. is it any better under WM5?
- waking up. Incoming calls, messages, and bluetooth connections, wake up the device completely. If it's in the pouch, or worse, in my pocket, the screen then gets bumped, thereby performing actions I don't want to. Even getting it out of my pocket without bumping the screen is a challenge. I tried setting an unlock password (some time ago) but that wasn't satisfactory; I don't remember whether the screen still unlocked on incoming calls, or if unlocking was too much a nuisance.
Ideally, it should wake up enough so that the firm hardware buttons are unlocked but the screen isn't active until you've used a button.
The voice-recording button used to annoy me with accidental presses when removing from pouch; I changed that button to do screen rotate which I find more useful, and no big deal when pushed accidentally - just push it again.
- Sound quality, especially for the person on the other end of a call. I've had people tell me I'm faint on the iMate. Positioning is a little interesting as I don't really want to rub my face all over the screen. Does the TyTN pick up any better?
- turning the phone off. (Like Windows' contradictory "click start to shut down") I really don't like the fiddly actions required to "turn on flight mode" on pda2k, especially when I don't want to get out the stylus. People with normal mobile phones can turn them completely off using one hardware button, and they don't have to look hard to see whether it's on or off. Some have mentioned wanting an easy way to switch to/from silent mode.
Is there a quick, sensible, easy way to turn the phone on and off, preferably also to/from silent?
Thanks

gregnash said:
- notification icon space in start bar. Currently it's ALWAYS showing a multi-message bubble icon (I'm always in CDMA 1x coverage, and also have an app running that puts its own notification icon up) so I don't see a new one for SMS or voice message. It looks like the best answer might actually be a 3rd party start-bar app, but still.. is it any better under WM5?
Click to expand...
Click to collapse
First a corresponding icon (envelope, phone), after more notifications, you get a bubble (?). Not a bubble all the time.
gregnash said:
- turning the phone off. (Like Windows' contradictory "click start to shut down") I really don't like the fiddly actions required to "turn on flight mode" on pda2k, especially when I don't want to get out the stylus. People with normal mobile phones can turn them completely off using one hardware button, and they don't have to look hard to see whether it's on or off. Some have mentioned wanting an easy way to switch to/from silent mode.
Is there a quick, sensible, easy way to turn the phone on and off, preferably also to/from silent?
Click to expand...
Click to collapse
One hardware button for standby, hold it to turn the device off completely. You get a window where you can just hit the d-pad button.
There's also a button for comm-manager, there you can select silent/vibrate mode and flight mode.

Hi, you speak of not wanting to rub your face on the screen, I actually use my TyTN in speaker phone mode to prevent this, I just quickly enable speaker on a call, and flip the phone to where the back is by my face, it puts the speaker in a good spot also, I know it sounds a bit weird, bit works pretty well.
Granted I don't do this with every call, mostly I use it when I know the call is gonna last for more than a few minutes.

notifications, buttons
TiMMah!!! said:
First a corresponding icon (envelope, phone), after more notifications, you get a bubble (?). Not a bubble all the time.
One hardware button for standby, hold it to turn the device off completely. You get a window where you can just hit the d-pad button.
There's also a button for comm-manager, there you can select silent/vibrate mode and flight mode.
Click to expand...
Click to collapse
You're right about the notification icon, but if I was watching the screen at the time of the additional notify then I'd already know what's there and wouldn't need the icon. On the pda2k cdma, being in a 1x coverage area generates a notification, plus mNotes puts one, so there's a bubble even before I receive any sms, voicemail etc. Combine that with the behaviour of the flashing light, it means if I missed something I may not know about it unless I go looking.
Thanks re the hardware button, that's good news.

face-rubbing
ChaoticDruid said:
Hi, you speak of not wanting to rub your face on the screen, I actually use my TyTN in speaker phone mode to prevent this, I just quickly enable speaker on a call, and flip the phone to where the back is by my face, it puts the speaker in a good spot also, I know it sounds a bit weird, bit works pretty well.
Granted I don't do this with every call, mostly I use it when I know the call is gonna last for more than a few minutes.
Click to expand...
Click to collapse
Creative! I'll remember that one..

Sounds like you should check out PhoneAlarm

Key press (by mistake) on the case

When my device P3600 received call or sms, the device is powered up, and then all the keys are active. If the device in case some key can be press (by mistake) and activate a program on this situation.
Does any one have a solution for that?

Use the Device Lock Feature in your Today Screen.

I do not like to add one more line to the dotay screen
can I use it without add it to the dotay screen?

If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").

anonimo said:
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
Click to expand...
Click to collapse
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms

I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers

iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.

Carmi said:
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Click to expand...
Click to collapse
Yes you can answer a call, the device lock only lets you use the power, answer, and hangup buttons. When the call is finished it is still locked, unless you unlock it.
I use this one. http://www.mr2-power.com/downloads/DeviceLock.CAB

10x, GREAT, this will do the job

it is work fine - 10x

Carmi said:
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
Click to expand...
Click to collapse
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.

anonimo said:
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
Click to expand...
Click to collapse
Your solution works too, the only thing is sometimes (for example) I'm sitting on the couch using my phone for email or surfing and watching a TV program. I stop to watch something interesting for 3 minutes and my phone has locked itself with the pin lock. I have to enter the code each time this happens. It can get annoying. If I use devicelock, I lock the keys when I need to, obviously when I'm at home and my phone is on the coffee table, it doesn't need to be locked. I set my device pin lock at 2 hours, that should give the phone enough time to lock itself if I loose it...hopefully.

yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.

dersvenni said:
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
Click to expand...
Click to collapse
Yes, very true, but at least they won't be able to see all my contacts, appointments, notes etc. That being said, I always use FlexWallet to encrypt all sensitive information which is synchronized to my laptop.

touch screen and buttons can be locked during a call?
I followed up this thread and found it very interesting. But it does't focus all the problem:
when call's come in, your solutions are ok.
But when I want to make a call, I found there is a nasty *****, clicking to call waiting or to head speaker on, opening a note or calling my voice box etc. etc.
Then I found that it was my ear or my fingers, clicking on the touch screen or my fingers clicking hardbuttons.
I think tat during a call on the normal speaker the only buttons to be active should be "hang on" and "loud speaker on". With loudspeaker or BT on, or call terminated,s screen and buttons should come back to full function.
Anybody knows a solution to this?
Regards, and keep on, its a great forum. i love it.

iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
Hmm this is just "device lock" that we can see in HTCplugin. In my case it does not turn off the screen. It just locks my device. Is everyone has "turn off the sreen" functionality?

> Karl der Käfer wrote:
>
> touch screen and buttons can be locked during a call?
I lastly tried the on-off button to block screen during outgoing calls.
I never did this before because I thought it would cancel the active call, but it doesn't.
Ok, I see it's more or less doing what I want. But it's very unconfortable. When I hit it bad, or don't hit it at all, or forget to press it?
Isn't there a posibility to have the screnn sensibility off, only sensibility, until the call is either ended, passed to outer speaker, headset or BT? or perhaps simply until I give it free manually?
It would improve safe usage of that phone remarkably, I think.
If not :-( , well, I allways can press the button ;-)
curious for what solutions you'll find on your problems with incoming calls. Perhaps that will give me an Idea.
Chears

I've complained about this on just about every major forum I have found. Hopefully, someone will eventually write an app to allow personalized device locking. I would set my trinity to not wake for ANYTHING and have ONLY the power button active. I would prefer to get audible alerts (or vibrate) to incoming calls, alarms and messages. Pressing power would be the only way to turn the device on. PIN features only annoy me. This would be very useful anytime I am not willing to immediately respond to a notification - driving, having dinner, in a meeting, etc. It could significantly improve battery life. I store mine in my pocket and accidental button press is a problem as well.

locking the screen

hello everyone, quick question
im looking for a locking program that will lock the screen when i press the power button (device goes into standby) and when it wakes up
the default locking program with WM is annoying because you can lock the phone BUT when u get an incoming call or text message, the screen becomes unlocked again and its easy to "answer" it accidently when its in your pocket. this is particularly annoying with text messages, because most of the time i wont even realize i have one and the phone will be awake for hours draining the battery and waiting to be pushed. anyways ive done several searches and come up with the following solutions, none of which work for me
1. S2U2, i dont like it, i tried it, wont use it again
2. SensorLock - An EXCELLENT locker, except it wont work on phones without Accelerometers...works wonderfully on the diamond tho
can anyone suggest something to me

First, set timeout for turning screen off autoamtically. This will solve SMS wakeup problem - screen will turn off automatically after some time.
Next thing, incoming calls - there is great Onyx ROM with Opal's slider - to answer a call, you need to slide your finger from center to left (or to right to ignore it). You can't answer accidentally using it

i appreciate your suggestions but neither works for me
i tried the opal but it didnt work properly, i actually had to hard reset to get rid of it
as for the timeout, it still doesnt solve the problem of the phone becoming ACTIVE as soon as a notification or text message is received

Call Pickup: Call pickup while phone is in my pocket. How to prevent?

hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers

This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.

mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again

Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot

I use Pocket Shield - it's not free (free to try though) but it's worked well for me

tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.

thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again

You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.

I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.

Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone

CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.

has anyone tried Lockmelite?
It may help - haven't used it myself though.

x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.

Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR

Pocket Shield doing perfect job for me

I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.