Database Users

need to make my brick back to a fone plz help

cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help

If it is realy a brick without any chance of life I need a part of it: the keypad.

Thats really rude.

not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen

All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.

Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.

You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.

Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.

Wizard Hangs..is dead like a BRICK

Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz

it is time to donate to XDA-developers!

Just reflash the ROM, friend. Seems to be a bad flash to me.

deleted this post

wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...

the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom

z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers

Elf with usb broken... what to do??

Hello,
i have a HTC Elf 128/256 with rom ONYX 3.0 (after hard reset ).
The USB connector in built-in the phone is a kind of broken:
can charge the battery with the USB cable but can't synchronize.
The device is discovered with errors in windows task bar.
I tried to sync some more phones and they work.
Now i want to use the warranty but the phone has a cooked ROM.
Is there anyway to reset the phone to a warranty supported ROM?
I have tried to flash with the sdcard but had no results in the tricolor menu.
If someone has any suggestion, i really need it!
Thanks!!

piriri007 said:
Hello,
i have a HTC Elf 128/256 with rom ONYX 3.0 (after hard reset ).
The USB connector in built-in the phone is a kind of broken:
can charge the battery with the USB cable but can't synchronize.
The device is discovered with errors in windows task bar.
I tried to sync some more phones and they work.
Now i want to use the warranty but the phone has a cooked ROM.
Is there anyway to reset the phone to a warranty supported ROM?
I have tried to flash with the sdcard but had no results in the tricolor menu.
If someone has any suggestion, i really need it!
Thanks!!
Click to expand...
Click to collapse
What kind of SPL do you have on your Touch? What;s your device CID?
You should be able to flash a stock ROM (if one exists) from SD for sure.

Hello,
here is the info you asked for:
Device ID: ELF010050
CID : HTC__506
IPL: 2.20.0002
SPL: 2.26.0000pof
ROM version : 2.27.80.1
ExtROM version : Cooked by dsixda
Operator version: Onyx 3.0
AKU version : 1.2.6
Page Pool: 8 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0300
Part Number: 99HEH034-00
MCC+MNC: Not found
I can access the Storage Card from the file Explorer in the ELF, but can´t flash the ROM.
I am trying to flash with a cooked rom (ONYX 4.0). This process should only bedone with stock ROM's or it works with cooked rom's too?
Thanks!!

I already tried to flash the ELF from the SD Card with the stock ROM that suits my CID and SPL.
No results flashing from the card.
When the ELF boots in tricolor mode, how can i start the flashing process?
Any help would be appreciated!!
Thanks!

Hello piriri
on the ELF upgrading forum, look for the one that says restoring your Touch via the bootscreen.
once on bootscreen, make sure you have the original stock rom (check the HTC site for details). ELF for ELF, ELFIN for ELFIN. If you're using an ELF, get the 1.11x rom, flash it and you'll be back. 2.20x for elfin.
make sure you uncheck the part that makes your usb connect "advance network connectivity" on your settings. then your elf will be fine.
peace

Hello Samaral
First thank you for your answer, but i can´t synchronize the ELF to computer through USB, i have the USB connector broken in the phone!
I need to flash a ROM without using the USB cable!
I tried flashing from the SD Card but it's not starting thr flashing process...
Maybe i can have a help from someone??please??
Thank you!

piriri007 said:
Hello Samaral
First thank you for your answer, but i can´t synchronize the ELF to computer through USB, i have the USB connector broken in the phone!
I need to flash a ROM without using the USB cable!
I tried flashing from the SD Card but it's not starting thr flashing process...
Maybe i can have a help from someone??please??
Thank you!
Click to expand...
Click to collapse
Make sure your SD is formatted in FAT32 not FAT

I've got the same problem,is it possible to do a rom update via bleutooth?

Hello
I have this problem since i change my rom to Onix( i don't remember what version)
Bu if you try several times one time it gonna work and then put the other ROM ( I put Onyx 4.0) and know works great.
Sometimes you have to put the cable and wait 5 minutes to start the sync.
Try and then tell us if you succeed.
joao M

It might be this..
On some devices I've noticed that the metal strips within the connector (in the phone, top part of the connector usually) looses away from its original position, this actually results in the problem you mentioned. If its not broken you may be able to unbend it and restore it to the original position with a thin pin or something of that sort. This should make things work again.
To prevent this from keep happening just be carefull when you plug/unplug your cables into it. Be gentle when inserting the cable and make sure to put the pressure to insert it only when its in the exact position.
hope this helps... good luck

Try first
Hi Piriri
another simple check before all the rom flashing,
1-change the cable, worked for me more than once.
2-go to Settings>>>Connections (in some roms System)>>>>Usb to Pc>>>>uncheck "enable...etc".
I hope it helps

Hi, what´s the name of file by flash from sdcard? in polaris the name is POLAIMG.* and in elfin?

Install the latest activesync
My guess is that your pc is running windows xp.. and you have not installed the latest activesync on your system.. you can download the latest activesync installer(version4.5) from www.microsoft.com/en/us/downloads.aspx/.. install that and then reconnect your device.. if you are running windows vista.. try to update the usb drivers.. again you can download these drivers from microsoft.. you will have to search for the appropriate drivers and then install them..

If you want to send it back under warranty, mine went back to tmobile with a cooked rom. they didnt say anything but flashed it with the rom that looked like a stock nike rom!

when you enter in bootloader mode before the trecolor screen you can see a white screen flasing, well, at this white screen is where you can flash from the sd, if your phone dont stay there and ask you to press power buttom to flash its cause you havent a proper sd, i meant fat 32 formated sd with ONLY one file in it named elf0img.nbh, if you use it correctly it have to work por narices

i reeallyyyy need somebody's help with unbricking my phone.. please hellpppp!!

alright.. i made a similar post to this before and i came across the wiki...
well i can't view what my SPL or my IPL because as soon as i turn the device on, all that shows is the boot loader screen and displays serial on the top with 0.16-0.90 in red characters on the bottom (I'm not sure what those are)...
here are the only details that i know about my phone:
I DON'T have hard SPL
My Original ROM i was using before was an htc windows mobile 5 rom
The reason that my phone is bricked right now is because the usb cable disconnected in the middle of the flash
I'm using Windows Vista for flashing
Computer won't recognize the phone when on usb
My phone (qtek 9600) can't load the operating system
*EDIT*
THE PHONE IS STUCK ON BOOTLOADER WHEN I TURN IT ON, NOTHING ELSE, BUT THE BOOTLOADER SCRREN DOESN'T SHOW MY SPL AT ALL.
ALSO, MY COMPUTER DOESN'T RECOGNIZE THE PHONE....... MY PHONE HAS A TYPE 2A BRICK
Helping me will be greatly appreciated
come on.. I'm without a phone

Do you have a 2GB or smaller SD card? Copy a rom image to it and rename it HERMIMG.NBH
Turn it on and you might get lucky!

Just make sure its stock rom that was supplied, or the updated WM06 version as the CID should check out then...
vwkess forgot to mention, reset into bootloader, hold power, ok button and reset with stylus. Hold all buttons in until you get to the tri-colour screen. If it works, follow the prompts....
Cheers...

hi,
i think i can hlep.
i had recently bricked my phone with a custom wm6 image, it worked fine for two days and then i reboot, and all i see was the welcome image, nothing else.
so what i did is -
i pressed the hard reset buttons - power + OK + SOFT RESET (Stylus), kept it pressed for 3-4 seconds, the fone rebooted, the screen was full with some colored bricks i connected my fone in USB and on screen i saw USB.
I then again flashed my fone with the working update, it worked perfectly for me, try may be you can get some luck
ps - before doing all these, i turned my fone off by removing the battery, i removed sim card and mmc card as well.
regards

That may work too, but again, try to flash with a stock rom, untick "connect with USB" in activesync and then try.
Make sure you go to boootloader screen, instruction in rajivlodha's post, before you connect to the pc.
Goodluck...

I need some help as well.
I think I may have bricked my phone. It's a rooted htc hero cdma. I'm running cyogenmod on it and it was working fine, until using metamorph to apply some changes to the theme.
I went to reboot, and it now it won't load past the htc screen. Even when i try the key combination to put it into recover mode. I didn't install a nandroid backup, and i'd be fine with just completely wiping my phone. help is appreciated.

Have i bricked my MDA Touch????

I have tried to flash a rom on my MDA Touch with elf-uspl. Since flashing my device i cant get it starting again.I have tried to take out the battery, i pushed the powerbotton nothing helps. If i connect the usb cable with my device theres no reaction too. What can i do?? Is there any help to reanimate the device?? Or can i use it as a brick???
Tim

bandosz said:
I have tried to flash a rom on my MDA Touch with elf-uspl. Since flashing my device i cant get it starting again.I have tried to take out the battery, i pushed the powerbotton nothing helps. If i connect the usb cable with my device theres no reaction too. What can i do?? Is there any help to reanimate the device?? Or can i use it as a brick???
Tim
Click to expand...
Click to collapse
Go into bootloader mode (camera button and reset) and flash the ROM. press
both the button at the same time,just release the reset button u can reach the boot loader.now the things will be much simple for u i thing just open up ur RUU file flash it up.kindly make sure that u use a original rom.if u dont have it just reply else u can search it over the other threads.once u have a original rom u wont need to unlock the device.make sure that u have enough battery in ur device.feel free to reply