Related
please help i have the t-mobile mda compact pm200 and i was removing a cracked version on pocket dos v1.09 from the remove list and it said windows wil need to perform a soft rest yes or cancel i clicked yes and my system restarted but now it just get stuck at the t-mobile screen. i have tried doing the manufatures hard reset but no joy i have take out the battery no joy and i can't even access it through my p.c what can i do to get it up and running again i don't care about the data already on there cuz it is all backed up on my sd cad
When you took out your battery, have you been waiting til the backup battery fully drained out? It takes about 30-60 minutes, better leave a few hours. Try this and post your results...
thank for trying but unfrtunatly it had no effect i tried for two hours then reinserrted it and no joy so i waited a further day but still nothing any other ideas tnx
Is it getting into BootLoader? Then you might try Flashing a new ROM!
how would i go about doing that? my computer won't even recognis3e my phone
I had about the same problem:
I was trying to install the Pocket PC Greek language support (free trial version) from the site http://greek.pocket-pc.penreader.co...der_Greek.html. on my MDA Vario Tmobile when it crashed!! It shows just a white screen and does nothing at all!! I soft and hard reseted the device but after restarting it shows the Tmobile screen and after a few seconds a white screen! Actually I am not so sure that the device is hard reseting because it doesn't ask me for a confirmation of the hard reset. When I startup my device it stops on the same white screen.No windows loading, no other commands accepting, not recognized by my desktop.
Did anybody have the same problem before? Does anybody know how can i get my PPC on working condition again
Thanks dagonist.
I hope somebody can help....
See for ROM upgrades on the forum :wink: if u get some images on the mini then it's not dead! It's just stuck at the bootloader mode, meaning that the OS is somehow damaged.. To solve this prob u must plug the mini into the pc (it will be recognised as an unidentified device, don't worry), then download a ROM upgrade set (u will find these on the net or in the xda-dev ftp). Execute the prog, wait 'till it finished and voila! Ur device will come as new If u encounter problem do a simple search in the forum regards rom - bootloader - upgrade and u willl find a lot of infos :wink:
Hope this helps, MocciJ
Thanks MocciJ.....but my desktop pc doesnot "see" my pocket pc at all!!
:? then it isn't yet in bootloader, is just stuck at the beginning of a broken OS! I mean that it tries to load the OS, but then it gets stopped since he read bad ROM (probably deleted in some way since u encountered this prob removing a prog) try to get it in bootloader mode, by pressing together the camera, power and reset buttons.. U will lose all the things in the RAM memory, but in this case u really can't do anything else.. After entering in bootloader, u can easily upgrade it..
MocciJ
Well, I just tried the camera button+power button+reset button....and nothing happens! It reset and comes back to the same white screen...
Any other suggestions??
well, did u tried to make it correctly? I mean: for entering boot loader u havce to press camera + power, and then reset (with camera and power pressed) if u can't still enter the bootloader, then I'm out of ideas, sorry...
MocciJ
I amdoing it write but nothing happens....
In the screen what can u read? If u read serial (it is barely visible) then see if it turn to usb when u connect the cable: if yes, we 're at a very good point...
When it starts up it shows the Tmobile logo and then for a few seconds :
ipl 1.08
spl 1.08
gsm 01.09.10
(something else...)
after a few seconds a white screen without any letters or anything else.
But I cannot see it anywhere on my desktop pc...
:? I can't figure out how you can get it back.. If it displays images and text, then the bootloader is still alive.. It even tells u the correct version of the complete ROM.. but I wonder why it can't access to the bootloader.. u must search in the forum how to reach the bootloader, but I'm sure of the power camera reset combination; when u can read SERIAL or even better USB on the device, u probably have solved most of ur problems, but chances are that u have even bad clusters of ROM, and cannot be restored with an upgrade (it happened to the External Rom of my mini after a bad upgrade)
I suggest to send it to repairs, before doing somewhat wrong, because if there is an original ROM inside they will repair it for sure, free :wink:
MocciJ
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/guaranty repair....
Thanks. The problem is that I got the phone from ebay, from a UK seller, and it was locked to Tmobile. So I don't think that I can ask for a factory/warranty repair....
seee i tried all of thoose things but i found the main problem was getting the computer to recoginise the thing and the program i put on was a cracked version ( i know i am a naughty boy) so if i send it off they could cause legal problems couldn't it
it depends on what u are meaning by "not recognised" but I assume that windows dosesn't even try to recognise the device (I mean that there aren't bubbles, notifications, or any other changes on the system) for the cracked software, well if u have installed it right into any RAM folder (not in the storage memory) then u can tell the repairing center that ur unit simply doesn't power on correctly.. :wink:
MocciJ
cingular 8125.
I need the original rom file (original firmware )can anybody help plz right now my fone stuck on the RUU mode can anybody help
If it is realy a brick without any chance of life I need a part of it: the keypad.
Thats really rude.
not a complete brick yet
not a complete brick yet is in loader mode red,blue ,green screen
All the cingular roms are here ftp://[email protected]/Wizard/Roms/Cingular/
user name xda password xda
which rom do you have?
It looks like you are in bootloader (multicolored) mode so that is good
connect via usb - you dont need to activesync to update rom. You should get a usb sign bottom left of screen and then start update.
Upgrading without activesysnc
After a interruptus ROM upgrade my s200 d'ont start . after the HTC i have a white screen but not more.
The activesync don't connect and i can't put the ROM another time.
I obtain the multicoloured screen with usb in the left botton.
Please, could anybody help me to update the rom in this situation , mayby without activesync ??
Regards.
You can flash a rom from the 3-colored bootloader mode (hold voice button when turning device on). When it says usb you can just flash without activesync.
Yes thank's i found a ROM that don't need activesync , after that i had changed that rom by my rom and at the moment my s200 y ok.
Thank's.
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
i cant get my wizard to go to bootloader ? is there a way to force it ?
thnx
about: force bootloader.
Hello my friend, please use the search options, is easy to find answer for your questions. Here you will find the solution:
http://forum.xda-developers.com/showthread.php?t=294107
note: use the wiki
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
I suggest you back to your Official rom first then start over again. I do this many times. Activesync always loose its connection before start flashing. It's a normal procedure. When you mention that your Wizard is still up and on the way, what you mean exatcly? Be more specific bringing point details on where you are stuck for instance. Then I'll try to help you out.
Good luck.
cellphoneman said:
hi,
thnx for the help.. i did follow the steps mentioned.. but it styll doesnt wrk. whn i try to flash the rom.. it supposedly looses connection wid the computer .. the screen looses the light buh the wizard is on all the way.. u cant use it though.. buh the lights are still blinkin.. (the wifi and phone)
thnx
Click to expand...
Click to collapse
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
joco2560 said:
hey, my mda doesnt even turn on anymore, do u guys think its the battery but the battery was fine when i flashed it but then it doesnt boot to the window, so i took the battery out and put it back in and it doesnt turn on anymore.. i tried the camera, rest button and other stuffs. do u think my phone is bricked? or i should def. get a new battery and try it out?
Click to expand...
Click to collapse
epimazzo said:
Sounds a power problem to me. I've been into this couple of times after being in a bootloader mode for a long time. Plug the Wizard directly into the powerwall to start charging then back to your flashing process first doing with an official rom. I don't think you have bricked it.
Click to expand...
Click to collapse
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Try to enter in a bootloader mode by hold on the camera button while pressing the reset button. You'll go to bootloader. If not, remove battery one more time, wait seconds and put it in back. Then, force bootloader again and try to charge through powerwall. You should get an orange light or similar during recharging. Check your model. Hope it helps you this time.
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
joco2560 said:
sry, i forgot to mention that it doesnt even charge too, both powerwall or pc
Click to expand...
Click to collapse
which version is it ,G3 or G4,and which Rom were trying to upgrade with.
Well,if its a G3 then,there's some power problem,but if it's a G4 and you tried to flash a Rom with IPL/SPL included,well its a brick.
Yeah...unfortunately zabardast_1 is right about your device. If it is a G4 and you flashed a G3 ROM, you could have bricked your techtoy! Hope you knew what you was doing at that time!
Try to always provide enought information regarding your environment and device so we can help you out better!
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Hellspawm said:
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Click to expand...
Click to collapse
How you came to such a stage??? Have you tried to unlock the bootloader or was it a result of unsuccessful custom rom flashing.....
Please tell in detail about how your phone came to this stage...
well
i find ginger v7 at this link
http://androidforums.com/x8-all-things-root/298647-new-v7-rom-2-3-5-gingerxperia-rom-x8.html
and i try to install in my phone...i did the steps as he say there how to install...and after i got what u see ... before i tried with ginger v5 but i got like answer from mobile the archive is bad...i try with v6 and my mobile after he start to looping on Sony Ericsson logo...and to fix i download SEUS , i update my mobile and it works...but now is not working anymore...i see the led is flashing red color and i think maybe i`m out of battery..i plug to charger but for 30-45 minutes the led stays open green and after is becoming again red and is flashing...this is the story. I think u know when u install a new software in xrecovery after is finish u have the menu to reboot the phone after u choose install from SD card...now with this ginger he says is done but the menu was at last step to choose the backup from sd card...and i press 2 times back key to see the menu to reboot...i select reboot and the rest u see on that clips. Maybe the battery is burn and she don`t want to charge? and because i`m out of power i got this results?