i am on pdamobiz aku3.2 rom and as soon as i open contact manager it closes instantly.plz help
note :the contact manager was opening correctly the first day i installed this rom what could be wrong.
In all WM6 that i have tried i have the same problem.
I can´t open contactmanager. It always stops after 1 sec.
Is it possible to fix this problem.
Please help.
BR
Pier
after flashing a new rom HARD RESET,don't just soft reset...
I agreed !
Hi
Yes Me too having this issue. I also experience Wifi not working..
Me using Dopod818. Any advice?
Thank you
Related
i installed wm6 the other day on my spvc500 and everything went well.
the phone started, but when i gave it a restart, it just wouldnt connect to my network...
it stays in NO service state and does nothing...
i really dont know what to do...please, help me...
i'm freakin for not knowing what to do....
WM6 problem & SPVC 500
HI,
I had the same problem and I know explanations.
Problem is in software which you installed after flashing WM6 to your SPV.
When you installing software everything is working on 100% ,but after restaring mobile
phone starting very long time ,doesn't have signal and time on main screen.
You have only one option ,re-flash WM6 again ![/COLOR]
Uninstall software hasn't influence!!!
be carefully with installation new software, I don't know where is problem exactly >
Here is list of software which is working without problems on my phone:
Extreme agenda 3.02
Smart explorer 2.1.4.553
SP Task Manager 2.1.1.315
Slovo ED
Adobe reader
Don't install :
profile switcher
cele task
If you are using different software you have only one way how to find "good" and "wrong" software.
After reflashing WM6 install only one program and restart the phone if everything will be working program is OK.
But if no you have to reflash WM6 again !!!
Be careful, all your data will be lost.
I got the same problem, after installing some software i got no network anymore.
Also the menue did not respond anymore on pressing 'Start'-button
I had to flash my Amadeus again, because also a hard-reset didn't help.
Now i think i have installed all the software again and it works still well
edit: 10 minutes after i rebooted my amadeus and BANG, nothing works anymore.
Crap.
I think the problem is 'facade', a tool to show a schedule on the homescreen.
it all works now
well, i managed to solve my problem...
the thing was to flash this WM6 and now everything works jut fine...
i can finally say that i am pleased with my c500!
Before I try this Version of WM6: Do you use Facade?
I flashed my Amadeus with WM5, installed Facade, rebooted and nothing worked. After that I flashed WM 6, did not install Facade and everything is ok
I got the same problem, but after hard reset everything was ok, so reflashing WM6 was not necessary.
Hi Guys,
Need urgent help!!
I am using HTC Gene for around 8 months now. All of a sudden my phone got this problem of getting hanged at incoming call.
I have uninstalled all the softs (Skype, photo contacts) i have installed. But of no avail; problem still persists.
However, no problem at all with outgoing calls.
Kindly help me suggesting a way to solve this problem.
Thanks in advance.
Did you installed any dialer? Could be the problem. If yes, try to deinstall it. Try a hard-reset too.
hi dude,
thanks for the reply.
i hav never installed any dialer...however as i said uninstalled every software i have installed earlier.
tried both soft n hard reset, but of no avail.
any other possible solution for this??
Did you installed any custom rom? If yes try to install another rom. Try to change your sim chip too (could be the problem). If even this way it doesn't work, I think you'll have to send your gene to repair.
murthy_asn said:
hi dude,
thanks for the reply.
i hav never installed any dialer...however as i said uninstalled every software i have installed earlier.
tried both soft n hard reset, but of no avail.
any other possible solution for this??
Click to expand...
Click to collapse
try to upgrade your rom to another version and good luck
Hi man,
Even I am also facing the same issue. From where we can pick another rom version.
I really appreciate abt gene hang at incoming call
I really appreciate abt hang this p3400 at incoming call yes but there is a solution just change the ROM
I suggest you to change your ROM to Karanz Loadded rom is just best for you.........!!
plz read the forum carefully before upgrading ur gene with any cooked roms.......it has some risk.......
i had similar problem before but with only certain call, and i noticed that the call that tend to hang is the one with ringtone file located in sd card. after i change the location of ringtone file to main memory, no more hanging call
Sumone pls help i just bought a hd2 here in india last month it was properly untill yesterday suddenly ders a problem the camera and camcorder application is unable to open...it doesnt show any msg when i tap on thee icon...but it doesnt workk....can sumone pls help......
Back up your stuff and do a hard reset. Let us know if that doesnt work.
I DID A HARD RESET CHANGED THE RADIO AND ROM BUT STILL OF NO USE IT DOESNT OPEN ONLI....
Somebody pls help me out...wat shd i do ...should i give my phone to the service center or throw it in a dustbin...just shifted from htc hero to hd2...
In that case it sounds like it's faulty. get it sent back, however if you have installed hspl make sure you remove it.
i hv had the same prblm camera and camcorder did not open but i found the culprit for this was that i was install the hot fox for camera in custom rom as soon i install it my camera goes black and crash out i hv to restore the rom it worked after flashing. in my case camera hot fix was the prblm. hope this helps u fix ur camera.
thankxx
deepak
crc_666 said:
i hv had the same prblm camera and camcorder did not open but i found the culprit for this was that i was install the hot fox for camera in custom rom as soon i install it my camera goes black and crash out i hv to restore the rom it worked after flashing. in my case camera hot fix was the prblm. hope this helps u fix ur camera.
thankxx
deepak
Click to expand...
Click to collapse
i tried everything ...did a hard reset...flashed many roms...but dat dint help...if anyone has a solutoin pls help...
can anyone pls provide me with the default camera files from their windows folder...pls
I have the same problem...
My camera haas worked 2 times with the original ROM and after I had the same problem described in this post...
I tried official hotfix, SD card format, soft reset, hard reset, ROM change and still have the same problem...
If anyone have an Idea, it would be great.
Hello,
this is the problem with my HD2:
Sometimes, i can't receive the incoming calls (while on the caller-side, it seems that the phone is ringing), it doesn't appear anything; besides, in that occasions, I can't do any calls: if I try the bottom "phone" it happens anything.
I can resolve the problem after few shutdown (and taking off and replacing the battery).
It is a very annoying problem; i've tried to solve it with original Rom, hard-resetting and with new unofficial rom.
What i Could try to solve the problem?
Thank you so much!
What rom do you have installed on your device ? An original rom or custom one ? Please give us some more informations , aboit programs , or anything else installed on your device . After that maybe somebody can help you .
I've got always the Original Italian Rom.
Today i've tried the Elegancia Rom 3.0 with radio 2.10.50.08_2 and i haven't installed any other thing but... the problem has happened....
your device is new, or did you acchieved as second hand ? If it is a second hand device, it may been tested before with many custom roms, so if it that you should try to do a task 29 , and after that install an original rom from HTC site .
Hello everyone on XDA
I write because I need your help as myself can not find the cause of my problem or the original forum rom
I always use Onix currently Rom Realise 13 when flashing the rom and do not install anything, everything works fine
but I would like to use the M2D 2.0 and in the same forum of the Onix is a link where is the recommended manila
I do not install anything apart from M2D, do not install or use a program that normally and still gives me the error when you start the phone, it takes a lot more compared to the time of initiation of the newly installed rom
I apply a hard reset, do not install the M2D, install my normal programs, including Mobile Shell ... everything works OK for a while
in the course of a couple of days, having turned off the cel a few times and couple of starts the same startup problem
when I start talking about the error is that installing the manila or not, I always end up with boot error, when the phone does not start one and only displays a message saying k
"The device can not start just because they turn off the device incorrectly ....."
I think more than anyone knows that startup error ...
I use the rom Onix because they are the only ones that give me problems with my simcard STK service
I hope someone takes the time to give me an idea as me and I ran ...
and even restore the original rom for my P3452, reverted to the CID unlock, flash rom again realize Onix 13 and still gives me the exact same problem
please need help here ... they would appreciate much
Greetings to all