HELLO EVERY ONE
I HAVE SEARCHED THIS FORUM FOR ALL THE BT AUDIO INFO I NEEDED B4 I POSTED THIS TOPIC ABOUT IT AGAIN
IVE BEEN AN MDA MOMMY SINCE MARCH AND IM VERY WELL EDUCATED TO UNDERSTAND HOW IT WORKS
I HAVE BOTH BT AUDIO APPS
1 FROM TRIANGLE POWERS AND ONE FROM SOME HERE A WHILE BACK
also i have the registry tweaks to help it work also ..
since then I've had 2 bt head sets
the Motorola wedge one h500
and now the jabra 250v
and I've noticed that with the Motorola wedge my bt audio coming through it was find worked perfectly no cutting off no nothing
also had no problem activating my voice command through it either
with the jabra difficulties galore.. i cant do voice command
and when I'm listening to music or a movie i have like a good 3 minutes or less b4 it cuts off and all my sound to my whole phone is out. which causes a soft reset to be done.
I'm just wondering if there is any one else with a jabra 250v that is not having any problems with the bt audio tweak. and if possible can you tell me what you have done that is different from what i have
and if you are having the same problems with the jabra 250v hopefully you will find some help here
thanks in advanced
Chayda
i found the way to to it thanks for nothing lol
hi i have the same problem you do where the music cuts off suddenly then comes bak on, can you plz tell me how u got it sorted
Related
Hey guys. I have an XDA II and the Motorola Bluetooth headset. I gave up trying to use the headset before the updated XDA II ROM as it was very temperamental to say the least. Now I have updated the ROM its much better but I still have problems. If I am dialling out and put the headset on first then its fine, transfers to the headset etc. If I am wearing the headset and then take a call its fine, transfers to headset etc. But if I am not wearing the headset, say it’s in its case and the arm is closed then I get a call, I open the arm and stick the headset on and answer a call and nothing. Wont transfer to headset and I need to use the phone. Not good when driving! Is this still a XDA II problem? Have I set it up wrong or is the headset not working right? Bascially I need to have the arm open on the headset at all times for it to work like it should (like it did on my T68i) and its very annoying? Any ideas?
This is the headset http://www.motorola.com/mdirect/software/ss_html_docs/bluetooth/bluetooth_headset_info.pdf
Thanks in advance
Have you installed bluetooth tools? Unbond your headset then rebond after installing bluetooth tools.
What the best place to get the bluetooth tools from? Sorry if this has already been asked. And are they free??
Thanks
Yeah I did try bluetooth tools but it did not seem to make any difference maybe its just my headset, it was like one of the first Bluetooth headsets out :? I dunno...
You can get Bluetooth tools from...http://www.angeltowns.com/town/bluetooth/
And it seems to be free
Thanks for that.
However, I could not find the settings button, Just a display on the screen. What are the 1 & 2 buttons for??
:?
Yeah the only changes you see are when adding new devices like headsets etc as far as I know. I thought the same as you, went through all the options looking for it hehe. Those two things on the screen are something to do with selecting different settings for bluetooth to conserve battery like always on or auto off. I am not too sure as I removed it when it did not fix my problem!
Yeah, I removed it too. It caused me all sorts of problems with connecting my bluetooth jabra bt200!
anyone got this working on the tytn
I use it with a Jabra BT250...
it used to work with my plantronics 320 on the wizard but wont work on the tytn is there any special settings you had to do
I also tried to make it works and it doesn't I assume that is due to the different headset plug.
Waiting for a version for TYTN
the prog will open a connection to the earpiece i can hear the static just wont forward any of the audio to it. works with the phone of course for making calls
I have the same problem with my Tytn (BTaudio seems to work because it stops the radio - I use it with a parrot car kit) but the audio still goes through the phone speaker...
did you find a solution?
gb
BTAudio On does not work, you have to turn it on via button press on the headset. BT Off works fine of course...
Rather annoying, but that's the way it is...
Sorry but I am afraid not to understand... the bt car kit is working properly and is paired to the qtek
could you please be more specific?
thks!
Sorry, you stepped into a rather cryptic response... I assumed you were talking about the file BTAudioOn.exe that worked on the 8125 but not the 8525/TYTN.
Search this forum for mono audio - there's a big thread. Also check the wiki.
attached. This cabs works great. To activate it, start playin music, then push and hold the button on your BT headset for about 1 second, it should beep and then music comes through. Only problem is you can't use MS VC through your headset, but it doesn't break VC.
BTaudio cab works
I have used the Gotland cab file and still had problems, until I began to think like a technician... Once I installed the cab file, I performed a soft reset and then repaired my Jabra JX10... It has been working fine ever since... I can hear music (either streaming or static) and voice... I have not tried tackling the voice commander problem though...
I have just upgraded the firmware on my headset using the software that is not posted on Jabra's site, but through a link in another post, I was able to do it... had to reinstall the Gotland cab again though.... May tackle Voice Commander later in the day... Who knows...
I'm using Bluemusic 2.0 and it worked with music to BT headset. Also using installed the BT VC fix cab in this forum at it worked fine with VC 1.6 - except incoming anouncements. ( Installation Hint: after installed both - you must delete existing device and then re-pairing the BT again).
I just made a thread, here http://forum.xda-developers.com/showthread.php?t=306363
Can enyone tell me if it is possible and how??
I have a Parrot 3100 and works fine for calls but can't put it saying nothing that comes from TOMTOM.
I have a friend that one time he heard the tomtom on a head-set.
But only one time and never more.
He doesn't know how!
Can enyone help me?
seem to recall people saying it works if
gps is connected first and then headset
You need a bluetooth headset with AD2P proflie. The standard hards free profile will only route calls to the headset. That said, if you press the voice dial button on your headset when an instruction is being read out, you will hear it in the headset (once only) - probably what the friend experienced.
Hi. I use a piece of software with my standard bt handsfree.
Chartcross Bluetooth Audio Router
The sound quality isn't stunning, but it lets all sounds that usually come from the inbuilt speaker to go through the handsfree instead
Tryed Chartcross Bluetooth Audio Router on my Trinity WM6 using hands free car kit (Delta System)... When activated it switches off the car speakers (like when calls arrive) but sounds still are on the speaker of pda...
Do you thing it will be necessary a reg tweak?
THX
No idea sorry. I only got my Trinity 2 days ago. I was using a prophet before which worked fine with it. I'll let you know if i do find anything though
IN MY HAND-FREE car kit my tomtom turned off the radio and instructions in car speakers.
right now that doesn't happen.
Infortunately i've tried so many roms i don't know i used at that time, and how make car speakers work again. Any help?
Hi all,
Well, after hours trying to search in this forum for a solution to the most common problem with our trinity, the A2DP profile to enjoy our music... I'm like in the beggining: I can't hear my music in my headset, only some sounds and calls.
I'm not sure, due the big number of post I read, about the correct patch/hack/app that I must install, so please, I need advice for this settings:
Trinity: AKA S300 from Vodafone Spain,
WM5,
Original ROM 1.23.164.7
Radio:1.33.00.01
Headset: Motorola S9
I Tried before with zoki A2DP, but doesn't works. So please, before installing any other thing, have you got any advice?
Thanks a lot, regards
Same Problem
Hi,
I´ve had problem with Morotola S9. The bluetooth lost audio for a few seconds. Them returns for a few seconds.
Some Ideia ?
Hi all,
Well, good and bad news about my problem
The good one is that after uninstall zoki's hack and install HTweakC 2.0, execute the tweaks of A2DP, I get my music sounds through the s9
the bad is that I can only hear music in stereo and calls in mono (only by the left ear). Videos doesn't go through headset: simply the sound goes to speaker, like if no headset are connected.
Any idea about this? TIA, regards
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?