Database Users

Bluetooth headset problem

I have only had my XDA 2 for a week and I can’t get my Motorola 810 head set to work. The XDA finds it and tells me that it is compatible with headset profiles but it doesn't seem to work. Can anyone advise me?
Thanks
Andy

Have you followed the procedure for pairing the device,ie: place xda in discover mode, when it finds the headset, tap then enter code for pairing, once paired switch bluetooth to on, then make sure you have bluetooth headset turned on from the main/today screen.

I seem to have problems with my bluetooth headset every once in a while also. I have a HBH65. On ocassion, the connection doesn't seem to be working even though headset is enabled and they are paired. I've found that if I soft reset the XDA2, that the bluetooth headset will work again.

Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.

I have downloaded the new Rom update and it seems no different. I have tried a soft reset and this did not improve the situation.
I know the headset works fine as I use it with my nokia handset with no problem.
Has anyone got a Motorola 810 that works ok on the XDA ?

cruisin-thru said:
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
Click to expand...
Click to collapse
did the bluetooth tools patch support voice dial from bluetooth headset? if not did anyone know the new rom from O2 works with this function? thanks!

Andy, no it doesnt support originate call from headset but it did allow lots of different gps and headsets to work, the headsets work for answer call/drop call only as far as I know, in the notes for the xda2 upgrade it mentions the headset profile but I dont know if anybody has hot the headset facility to work yet, I havent upgraded yet so I am yet to test it.

I have installed the new ROM and as far as I can see it does nothing for Bluetooth beyond fixing some compatibility issues on some headsets. It still only allows one headset profile (so if you have a headset and a handsfree kit as I do you need to delete bonded pairs when you change devices - now there's intelligent functionality!!). No headset dialing so still not a complete BT headset implementation. No handsfree support.
Anyone else think that the XDAII is a great PDA but about the worst apology for a GSM phone in the last 10 years?
If anyone can point me to a decent set of BT tools to add on let me know.

Not really.
I fully agree the XDAII is a poor phone, with the best agenda and contact list available, but that is!
I wonder if Phone-pda makers are really going the so called "convergence" way.
To date, and after many different PDA/phone/PDA-Phone devices I've tried, no one is even close to the mark.
Something so "simple" such as merging an OLD Ericsson (or Sony-Ericsson) T-68 phone abilities, with just a PPC 2002 (yes, not even 2003) PDA, should produce a combo, no machine on the market is even close to.
IT'S SO DIFFICULT?
:evil: :evil:

Sharing my experience with bluetooth headset

I tested my QTEK 2020 with my new SonyEricsson HBH-600 (Akono) and it didnt work first time bonding it. The OS asked me if I wanted to use it as a headset but it simply didnt work
I downloaded Bluetooth tools and bonded again and chooses the headset profile. Now it works perfect!
It was worth the 500SEK (66USD)

I had a nightmare at first with my Plantronics M3000 headset too, it kept losing it's bonding and requiring the passcode to be re-entered (not the easiest thing to do in the outside lane of the M6).
However, install Bluetooth Tools and it works like a dream, looks like BT is a must have addition.
Gonna have to try it with a Jabra h/s now as they look nicer!

I have a Jabra 250 and it works great with the XDA II.
How would Bluetooth tools improve things?
What other benefits are there?

If it works dont install BT Tools It didnt work for me with the original software so I made a try with BT Tools and then it worked fine.

mindracing said:
What other benefits are there?
Click to expand...
Click to collapse
Turns BT on with incoming calls and off automatically when no BT activity is detected.
This is in my opinion the most important feature: you dont have to keep the BT always on, saving a lot of battery power.
Then it manages a couple of power profiles (e.g. backlight always on).
Then... many other things @ http://www.angeltowns.com/town/bluetooth
Bye

I have the same headset (HBH-600) as you and it worked right away with my XDA. Why is it different? I thought the hardware on your QTek and my XDA is the same?

again... BLUETOOTH ISSUES

hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz

Yeh, the Blue Angel is a bit strange with some bluetooth devices.

I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma

@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.

problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz

1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.

DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.

your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.

shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's

KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right

Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga

Can't Pair Bluetooth headset

Hey all, I'm new to the site. I've been reading a lot on everything about the Kaiser and I absolutely love it. The information on this site at times can get a little bit confusing but I still manage to get everything done.
My problem is that I can't seem to pair my bluetooth headset (Plantronics 520) with my At&t Tilt. My tilt is not able to discover my headset :-( I was wondering if there is any problem with my phone or just that my bluetooth headset is not compatible with my device
btw I have L26 V10 installed
Thanks in advanced to all those viewing and offering their help (and sorry in advanced for my English as it isn't my 1st language >.<)

Shimei said:
Hey all, I'm new to the site. I've been reading a lot on everything about the Kaiser and I absolutely love it. The information on this site at times can get a little bit confusing but I still manage to get everything done.
My problem is that I can't seem to pair my bluetooth headset (Plantronics 520) with my At&t Tilt. My tilt is not able to discover my headset :-( I was wondering if there is any problem with my phone or just that my bluetooth headset is not compatible with my device
btw I have L26 V10 installed
Thanks in advanced to all those viewing and offering their help (and sorry in advanced for my English as it isn't my 1st language >.<)
Click to expand...
Click to collapse
I think it is the settings off your BT Headset i think. It is a common problem for me with other BT Headsets.
Use the powerbutton from the BT headset till you get blue light without interuptions.
Then phone must "pair"
I had the same problem.

>.< even when my bluetooth headset is in pairing mode i can't find my headset on my phone :-(
Does anyone on this site use a plantronics 520 with their Kaiser?

Shimei said:
>.< even when my bluetooth headset is in pairing mode i can't find my headset on my phone :-(
Does anyone on this site use a plantronics 520 with their Kaiser?
Click to expand...
Click to collapse
Samme problem with 320 Plantronics & TyTN 2
If I push pickup call on headset the voice commandor start

Possible to send all audio over bluetooth?

I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,

i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do

xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.

My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....

Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,

yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!

I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(

it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation

Works fine with Jabra 3030, all audio over it, music, system sounds and calls.

Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?

I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,

its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)

I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.

Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.

I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?

I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....

the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.

Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.

Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.

Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?