I have a strange issue with my Vario II ! - 8525, TyTN, MDA Vario II, JasJam General

When I re-set my phone, I get one of the alarms going off, and the vibrate alert.
This happens about 4 or 5 times in succession for no apparent reason when Windows loads.
It then happens intermittently, but not as often, for about 5 minutes – again sounding and vibrating.
I do not have this alarm sound set up for any action in the sounds settings. It doesn’t matter if I have an appointment or not. I do not have an alarm set-up.
One additional point (which indicates a software fault) is that I had my phone replaced for SA issues and I did a full backup before I changed the phone (this problem also happened on my old phone). After a full restore, the problem was copied to my new phone.
Does anyone know / or has anyone had this issue and resolved it?
Thanks all.
ratzz

Anyone any ideas on this (other than a hard reset)? It's driving me CRAZY!!

since youre still using the old restore... youre just moving the problem...
You can try to uninstall your apps one by one...
But it's faster to hard reset and re-install it one by one..

You could try installing alarmtoday by pocket max, this will list each alarm/notification/every sounding event on your system, you can then see what's causing this and hopefully cancel it.
if you find out, let us know. Good Luck

Thanks guys -- I figured that my worsed case scenario my be my only option.
Ratzz

Just a thought but if you go into Sounds and Notifications do you have 'vibrate' set for Activesync?

Related

Unable to dismiss/snooze/disable K-jam alarm

on my gf's K-Jam, she is unable to change her alarm and also dismiss/snooze it when it rings. For example, she originally made one alarm for Monday-Friday @ 5:00am. Later, she edited the same alarm to go off at 7:00am. but instead of only going off at 7, it also rings at 6.
also, when she unchecks the alarm box to disable it, it still rings regardless.
When this alarm problem happens, each time you turn the k-jam off and turn it on again, the alarm signal rings every 20-30 seconds for the first 3-5 minutes the phone is on.
soft resetting does not change it, nor does a hard reset. I flashed it with KJAM_WWE_1010903_106_10110_ship.exe and it worked fine for a few days, but then the problem came back.
i'm assuming it is a software problem and hopefully the new IMATE ROM will fix this...or is this a hardware problem?
Sounds like a duplicate notification. You have several options to get in there and manually remove it.
You can try running CheckNotifications.
You can use MemMaid, find the notification and delete.
You can do the same with SKTools.
jurassic5 .. I had exactly the same problem ... Wizard was driving me nuts. I tried almost anything to get rid of the alarm but NO. I was close to call support. But then I found a official ROM 1.6.7.1 WWE upgrade ... and the problem was gone.
I have same problem, I try to remove them from the running queue, but, it is always come back after a soft reset. for people who has this problem and don't want to flash his rom, my stupid way is, hard reset once, then never ever use the build in alarm, try to use SPB time or something instead.
I have same problem, I try to remove them from the running queue, but, it is always come back after a soft reset. for people who has this problem and don't want to flash his rom, my stupid way is, hard reset once, then never ever use the build in alarm, try to use SPB time or something instead.

HELP | TyTN unable to wake up after power off!!!

Guys
I am facing a really weird problem which is becoming increasingly frustrating and driving me nuts.
I usually charge my phone overnite using the stock charger. The phone powers off after a while as per the the settings (15 mins I think) and stays like that throughout the night. But in the morning it fails to wake up totally. Nothin works. So, I am forced to soft reset it everytime this happens. This has happened quite a few times now.
Any ideas why this might be happening? This is killing me because the alarms dont sound and the phone is totally dead in the morning.
ps. I am using the stock HTC ROM (1.18, 07/22), on Cingular UMTS.
Thanks in advance.
JoKer
Dude, I'm getting the EXACT same thing!!!! I'm using using the stock TyTN ROM! I have no idea what's causing it, or even how to fix it. I thought it had something to do with software, but that doesn't seem to be the case here. I need help too!!!!
) .. that's crazy .. maybe this is the next SA ... jk ..
but seriously ... maybe there are more folks with this prob ... let's see if anyone knows any more details about this or how to fix it ..
And the really strangest thing is that this doesnt happen to me in the day .. it powers off and wakes up fine .. but then it's never powered off for that long ..
Mine seems to happen when it's powered off for a given amount of time. It's insanely annoying because I have to reboot, and I hate rebooting the phone.
I've experienced a lot less of this behavior since moving to the 1.20 radio ROM...
I'm at the 1.20 radio, and I'm still having the problem.
I too am having exactly this problem. I have flashed the Cingular 1.34 ROM but it seems that the ROM doesn't matter. (I notice the bluetooth and or wifi lights are still on, the screen just doesnt come back to life).
Hi, you probably already tested this, but your device goes into standby mode with WiFi on it will become locked and unable to power on.
But it has happenned to me this sympton without WiFi connected.
Cheers
check out this search...there are a few topics on this already
http://forum.xda-developers.com/search.php?searchid=192877
Well I used to think there was some truth to the freezing being related to certain apps... and I suspected on mine it was PhoneAlarm causing problems.
Last week I hard reset and re-installed everything except PhoneAlarm but am having freezing if my TyTN is not used for some time (does not have to charge to freeze!)... And yes, I do kill ActiveSync and WiFi when I know I will not be using my phone for a while. My conclusion is that there's more to this and that maybe a newer ROM from HTC will address this - anyone know what the status is on this??
BTW, anybody else having alarms going off constantly on re-boot or MS VC reading out ca. 2 weeks of appointments on soft re-boot?
I still don't think there is a definitive answer on this. I've heard quite a few things to fix it; but I don't really have any of the software that's mentioned. Someone said it was because I had Opera installed (so I uninstalled it), then someone said it was because of the ActiveSync Advanced Network Connection option (I unchecked that), last someone said it was because of SBSH PocketWeather, and to take that off the today screen. Well I'd rather not do the latter, so I'll test these two and see how it goes.
I think it's the today plug-in issue. I hard reset and left off PW and it didn't lock-up for 2 days. But like you, I like it a lot.
So I'll deal with resetting it.
For me, it's just Pocket Plus, Resco File Explorer and WA Lite on the Today screen along with the standard stuff .. really nothin that needs to connect to the connect to the internet .. and still ..
The one that caused the TyTn not to wakeup was Wisbar Advance. Since removing it, I've not had any issues with the pda not waking up from power off.
Ok, what are you using in its place?
Well after uninstalling Opera, and unchecking the check box; I had the problem again! ( So annoying (.
Well i'll post my problem too
I have missed class twice in a week because the phone alarm never rang in the morning. The phone was frozen and i had to reset it in both cases. I always leave it charginf over night and now i'm afraid to turn it off anymore for fear of never waking me up in the morning
Adi
guys,
I am suspecting the issue is related to the today's plugin. After a few days of experiments, I believe the battery level reading utilities such as SPB pockets plus or Resco today plugin might be the one we are looking for.
Not only uncheck it, but also un-install it, hopefully, would help to solve the problem.
Mark
I have no today's plugin, just the standard stuff, en i do have the same problem
Give the Fake Server Trick a try, which worked for similar symptoms on the old Axim x51v: http://www.aximsite.com/boards/showthread.php?t=112638
If your problems are caused by the same thing, then this is to do with Activesync launching itself automatically. This in turn causes windows mobile 5 to stop waking up from standby, requiring a soft reset. No idea why.
I did the FST straight away when I received my TyTN and I don't get any of the problems you describe at all. It's worth a go!

WM5 Alarm Problem

I know there was a thread for this a while back as I read it when searching for something else. Now I can't find that thread (the search function in forums is never great!) but I suddenly have a huge problem with the built in Alarm function on my Wizard...
I've had a few issues before where when the phone is charging overnight it soft resets by itself and then sticks on the initial O2 screen. In the morning, I disconnect the phone from the charger and the phone then boots, I enter the password and the alarm goes off (usually later than the time I set it for). This is annoying but I can live with it.
However, this morning I had HUGE problems. It did the same as usual, phone was stuck on O2 initial screen so i unplugged the charger and the phone began to boot. I entered my password and the alarm started to go off but I was unable to switch it off at all. It does not come up with 'Notification' in bottom left of the screen like it normally does when the alarm goes off. It just kept going off even when I unset the alarm. I did a soft reboot but the same thing happened again. Also, the right-hand light at the top was orange even when the charger was not connected so the phone seems to think it is charging when it isn't.
I have managed to get it to stop thinking its charging by enabling wifi for a few minutes whilst charger is connected, then disabling wifi and disconnecting charger. But, every time I soft reset, the alarm starts going off and wont stop and the orange light comes back (while not not connected to charger). Also, none of my calendar items are reminding me 15 mins before the appointment like they normally do.
Is there anything I can do? I really don't want to hard reset if possible and certainly not just to stop the alarm! I am using Molski's latest 30Mb free WWE ROM. There isn't much installed, just PocketMax PhoneAlarm (great app!), TCPMP, handy Switcher, OMAP and OMAP+, Resco file explorer and Salling clicker. But I have had these apps for a while now. There is also SoftKey which appeared after upgrading ROM and I have changed my left button (directly above the call connect button) to Notes, perhaps this is why the Notification does not come up?
It is so embarrassing that a £400 phone cannot do something so basic as waking you up at the right time
I know a lot of people have had this problem with WM5 but has a fix ever been identified? Sorry about the huge post btw but any advice would be hugely appreciated
I'd say try reflashing that ROM or try another ROM...
The $400 phone was designed to work with the ROM from the manufacturer and MO that it was sold under... If the problem still persists under those circumstances than the problem is most likely hardware related and you should be seeking a warranty repair (if that option is avalible to you). Although, you were made aware when you loaded the cooked ROM that it could cause you problems and voids any warranty.
I had the problem (although not as severe as today) when I was using the default ROM that was installed from the phone company...
Also, from the last thread about this it seems a large number of people with different ROMS/devices have had the problem...I'll reflash if I have to but I'll try a hard reset first....
try removing phone alarm and see how it will now behave.
Read my post in this thread http://forum.xda-developers.com/showthread.php?t=275189
Thanks meschle, I think it's fixed, I had to soft reset then delete the notifications several times, but now it has stopped sounding the alarm every time I soft reset...
Saved me a hard-reset - much appreciated
on my Tytn it says "Clearing Duplicate Events Processing 67 of 66 events" and basically stays like that.
Any ideas?
warmkiwi99 said:
on my Tytn it says "Clearing Duplicate Events Processing 67 of 66 events" and basically stays like that.
Any ideas?
Click to expand...
Click to collapse
Hi it froze - try deleting the duplicate notifications one by one (click on the notification in question) or try trial version of memaid http://www.pocketgear.com/software_detail.asp?id=14279

Freezing after recharging 8125

I have noticed a peculiar event with my 8125. When I recharge my phone, it freezes after reaching full charge. It doesn't happen all the time, but enough to be noticed. I have absolutely no idea why this would occur. This poses a certain problem in that I sometimes use the phone's alarm and I charge it while I sleep. Any thoughts as the source of the problem and the solution? Thanks.
Same Problem!
Glad I am not the only one......
Any cures for this woe?
What Alarm program are you using?
Hello Curious D,
What Alarm program are you using? Since I am having that same problem some one else suggested that it may a problem with that program. I am using:
Green Software's "Alarm Clock"
The alarm is a freeware version called AlarmClock v0.04. It works fine actually and the fault is not limited to when I have the alarm running. Actually, I don't have this alarm running now because I can't rely on it and the problem still persists.
My alarm clock info
Hello again,
My alarm clock program is AlarmClock v.04 as well. Perhaps there is at least correlation between the problem and the program. Though you say this happens even when the alarm is not set? Have you tried completely uninstalling the alarm clock from the wizard? Perhaps I will try this. The only problem is "The Problem" is only intermittent....What to do..???
I have been having problems with this unit freezing on an intermittent basis that appear to be random. It may be that I have noticing this freeze after fully charging only because it is an event that I can latch on the intermittent freezes on. I have to soft reset my phone at least twice a day. The most annoying thing is not realizing that my phone has frozen so I miss calls. I have been loathing the idea that I have to do a hard reset since reinstalling everything is such a pain. I installed SKTools in hopes that it might have solved my problem, but no such luck. (I have to probably do the same on my desktop and laptop since they have slowed down without any known viruses or trojans showing up on scans.) The hardest thing about reinstalling everything on this phone is how long do I wait for a possible freeze before I can install the next program. That process could take a couple weeks given the number of programs I have on this phone (about 35 plus some other required programs).
I am at the same point
Considering a hard reset, or possibly re-flashing the original rom. But as you have pointed out...doing this in such a manor as to track down offending software can take forever! I am really not sure what to do here. I really wish that we could get some more people who have had, and possibly solved, these problems to chime in. But it appears that most every one on this forum is more interested in the next greatest rom or CrossBow.......... Is there a forum that is more geared toward the actual everyday use of and problem solving of the Wizard? Maybe I am in the wrong place?

My Wizard has multiple bugs, need help solving

I understand that this forum is filled with developers. So I am hoping for some informed help. If you have any of these same problems please respond as well. I would like to know if these are isolated to my setup
I migrated from a cel phone and a PPC running WM2003/2003se. Mainly for the converged device, but also for the persistent storage. I run a small business, and and am very busy and rely on my phone and schedule all day everyday.
I have only had the wizard (MDA) for about 3 weeks and experienced odd problems since the first weekhttp://forum.xda-developers.com/images/smilies/eek.gif
. Unfortunately I did not buy new, so I am not sure if any of these are covered by warranty or not... I am just going to list the problems:
1) If I leave my phone plugged in at night to charge than by the time I wake up the phone will not come out of standby. I have to press the soft reset button to get the unit to work again. This happens intermittently
2) I use an alarm program so that the unit acts like an alarm clock. If the phone is plugged in at night, and does not experience problem number 1, than the alarm just won't go off. I turn on the phone and the alarm program is open, but it did nothing. If the phone is not plugged in than the alarm works fine.
3) Soft buttons. I have the registry set to remap what the soft buttons do. I use Agenda Fusion (Latest Version) so i have them set to open the calendar and the contacts to Agenda Fusions view of them. This works most of the time. On occasion the soft buttons just stop working except for running through the menus for reminders.....
4)The other day i went to take a photo, the camera said that it could not proceed because there was not enough memory. At the time I had 30 megs of storage free, about 12 megs of program free and about 900 meg left on my sd card...
5) Every so often the unit won't launch a program, it says that the exe is unsigned or not trusted. It works every other time though.
6) I use cLaunch. Every so often cLaunch disappears from the today screen. The only wat to get it to reappear is to remove it from the today screen from the today items menu, wait a couple of seconds and then return it to the today screen.
7) Every so often the unit stops recognizing the sd card..have to remove and re-insert
8) I use reminders for all my calender and to do items. Occasionally the reminder will go off for a certain item 24 hours in advance, even though the setting is correct in the item...
I feel like I am missing a few problems. But you get might point, WM5 is weird. All of the above can be corrected with a soft reset. But sometimes the problems show up multiple times a day. Causing me to have to soft reset in the most inconvenient times, several times a day.http://forum.xda-developers.com/images/smilies/mad.gif
I did not have these problems under WM2003. I have a friend who uses a Verzion phone that is similar to the wizard (made by a different company though, not HTC...it has an external antennae and that is where the stylus is stored as well) She and I were comparing phones today. Hers runs WM5 but she said that she has never experienced any of these problems in the 1 year that she has owned hers...
Is this an HTC Wizard problem? A WM5 problem with the wizards? Would it help if i installed on of the alternate roms that I read about here on XDA developers? I am considering a hard reset and starting from scratch but I don't want to go that route unless it is the only way. And if I do, I may just use one of those roms.....What does everybody think?http://forum.xda-developers.com/images/smilies/confused.gif
Sorry for the long winded post....
Seems like a software problem based on (1) and (2). Is the ROM an official ROM?
Re:
Hello Hanmin Thanks for responding,
Re Number 1. I just saw that some one else posted with that problem. So I will see if they have they same alarm program installed. I have wondered if everything is software related. Thats why I am hoping to see if others are having these types of problems, and if so, what programs they are using...
Re the rom...yes it the official T-mobile release, version listed in my sig.
Thanks again
New problem
I have just encountered a new problem:
While picking up my voice mail the system would not register my button pushes. Weather on screen or the hardware buttons. I could not interact with voice mail, nor could I end the call with the hardware button or the soft button....I had to reset the phone to end the call!!
How frustrating is that
Have you tried reflashing the original ROM? Being a used phone that would be the first thing I would do. It's going to wipe out all your data and return it to an "out of box" state, so i suggest backing up anything important and sync to your PC. If that doesn't work then you have a hardware issue but I'm willing to bet that should take care of it. You can find the original ROM on HTP's website. Good Luck
Thank you
Thanks for that suggestion....I am hoping to not go down that road, if I can help it. But I will do it if there are no other options. So If I may ask: How many votes does re flashing old Rom Get? And are there any other ideas?
Again Thanks. I am going to download the rom in case it does come to that....
wait...the phone dosen't wake up unless you push the small button on the top of the phone? That is not the default setting on the MDA, however it's acting naturally. Our phones go on a standby to save power. Click the battery icon in the lower right hand corner-->Click the Advanced tab--> uncheck Turn off device on external power
Misunderstanding....
When the phone is plugged in over night and reaches %100 charge some times it won't "Wake Up" even hitting the power button on top. The only thing that will turn it on is the "Soft Reset" button on the right side, beneath the IR sensor.
bump
no text
No text
Just bumping
It sounds like you have software problems - possible a corrupt notification queue - personally i would do a hard reset of the device - probably in the process of this i would soft reset before the t-mobile extras install - taking details of gprs, mms settings before this.
I would run the phone without installing software to see that its not a hardware problem. Then reinstall programs one by one and see how it goes. Some software like claunch is not made for wm5 so expect some glitches (i use claunch and get occ glitch)
If you dont want to hard reset check the notification queue for duplicates and rogue scripts using check notifications - attached - install via pc. Dont delete notifications important for system running - common duplicates are clock\calendar.
alarm problems
Hi,
frankly i had similar issues - less critical but annoying: alarm clock not waking me up, slow system, notification queue mess, difficult resets, camera issues, bluetooth a2dp skipping. I upgraded my Qtek multiple times, and finally i can say that 2.26 roms (i use molski's) are exceptionally stable and reliable. The problem is not Wm5, the problem is how buggy many released versions are. So, my suggestion: look to the forum, find roms that appear to have a reliable history, cross your fingers and...upgrade. Then, resist in upgrading to any rom that just came out and appear to be faster, cooler, nicer. Unless you have an issue to be solved, and you see 100 messages confirming that the rom is stable and does the job...
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
cameraddict said:
Thank you meschle and pzucchel for the thorough answers. I am going to try the notification queue first.
@ Meschle: where do I find the gprs, & mms settings? And should I just copy them down by hand? Then after re-starting w/out tmobile crap, do I just put these settings in the same place as where I found them?
@ Pzucchel: Do you believe that Molski's 2.26 is more stable than the Tmobile factory installed 2.26?
Thanks again
Click to expand...
Click to collapse
Write them down manually its the safest way - there are cabs available but often dont work.
GPRS - settings\connections\connections\manage existing connectons - settings should be here prob named t-mobile
MMS - go into messages\menu\options\MMS\servers click on prob t mobile again.
Thanks again!

Categories

Resources