Related
updated
thanks poof.
and here its is
remove the the zip extencion before installation
install and rebbot reboot.
to configure go to
start/settings system/
enjoy
regards faria
cool, we're just talking about this at TreoCentral.
Unfortunately, it doesn't seem to do jack on the Treo 700wx regardless of the settings I chose. I soft-reset the device and even installed/uninstalled.
hmph.
tried it on my apache, I get the app. but it doesnt appear to close anything.... may I ask what device this is coming off of?
~mike
did not close app on my universal
poussin69 said:
did not close app on my universal
Click to expand...
Click to collapse
Yes...me too on aku3.2 beta..
any clue...?
didnt work on my jasjam either
same thing with my TnTY (fr rom)
people try again it has been updated
may I ask what ROM did this come out of?? also the updated one is working great! also what was the task manager program then? I see the app has been renamed and the icon is different..
Thx,
Mike
yesss....congrats runs very well thanx
Lvballer06 said:
may I ask what ROM did this come out of?? also the updated one is working great! also what was the task manager program then? I see the app has been renamed and the icon is different..
Thx,
Mike
Click to expand...
Click to collapse
mine come from a prophet rom. it worked fine in the wizard,the updated one i have updated the cab with some missing files from poof cab.
see the pictures same version diferent icon
faria said:
mine come from a prophet rom. it worked fine in the wizard,the updated one i have updated the cab with some missing files from poof cab.
see the pictures same version diferent icon
Click to expand...
Click to collapse
thanks I was just wondering.
~Mike
When running the cab it gives me;
Failed to install aria htc x.cab
This is on Prophet (Qtek S200) Anyone else seen this error?
kind regards
marl
Edit, downloaded again, works fine now, thx for the cab
Any ideas if this is possible to be mapped to a hard button.....like the ok button on the 750v?
Thanks
I have tried three times on my TyTn but every time the cab file fails to install. I downloaded the zip file, renamed it and put in in my SD card. When installing I got the message Cound not install etc.
Any help available?
I'd suggest you to have a look to the device and try to find out if there is no left files from the former installation.
I've struggled time ago with such Resco things. Maybe it's the same issue.
It's only for Pocket PC PE, or it be useful for WM 5.0 Smartphone Edition?
I have a Qtek 8310. ¿Can I use this taskmanager?
Thanks
Found Kaiser.HTC.Home.v2.0.814.722-schen.cab in the Hermes forum:
http://forum.xda-developers.com/sho...hlight=Kaiser.HTC.Home.v2.0.814.722-schen.cab
Versin 2.0 allows you to add a diffrent number to favorite People (1.5 defaults to the mobile thus you need to create a new contact to use the Office number.).
Well that is the good news, the bad is that I cant get it to work on my BA
It installs well.
Under Start - Settings -Today - Items - It adds a HTC Home Tab.
The tick boxes work fine (fast as well JOKE).
And on the Today screen it adds Nothing.
I have done a old uninstall, new install, wait, softreset, wait.
This is a patched version based on the thread so may be the clean version would work.
So has anybody got Version 2.o to work on a BA ??
That's v 2.0.720719.
2.0.814.722 is here: http://forum.xda-developers.com/showthread.php?t=327646
DANDANA said:
That's v 2.0.720719.
2.0.814.722 is here: http://forum.xda-developers.com/showthread.php?t=327646
Click to expand...
Click to collapse
SOME PICTURES PLEASE!!
I didn't try it and MDAIIIUser said isn't working on BA....yet
It looks the same as 1.5 with aditional options, but i can't get it to work either, i install needed certificates but still nothing
xplode said:
It looks the same as 1.5 with aditional options, but i can't get it to work either, i install needed certificates but still nothing
Click to expand...
Click to collapse
2.0.xxx.xxx work much better than v 1.5....thrust me.
Are you able to get v2.0.7xx.xxx to work?
You can see that v 2.0.8xx.xxx and v 2.0.7xx.xxx and v1.5.xxx.xxx all using DIFFERENT certificate to sign. That is my experimenting on the certificates thing. All work OK with my Hermes. Maybe it is certificate thing...maybe it is other matter that prevent the new version from working correctly for BA. But really I DONT see any reason other than certificate. You can try to sign the dll with other certificates to see if it work or not.
I only patch the dll to enable instalation outsite of windows directory and to fix the brightness shortcut. Other than that nothing. So, this should not be the issue
Congratulation guys WM6 finally arrived for BA and Hima user. I should have hold my thrustworthy Hima longer I dont have to upgrade, BUT Hermes ROCKS, no regret.
Thanks schen for your input, i have tryed al the 2.0.x versions with the same certificates (looked mainly into hermes forums) provided for hermes, but the home settings show in today options and the plugin just does not load. I agree that this is certificate error i will try to sign them with difrend certificates to see what will happen
regards xplode
Edit: I have tryed both 2.0 versions on clean hard resseted rom with both certificates installed and none ot them does not work for some reason, now i will try to sign the dll's with sdk certificate to see the results
Anyone have any luck with Home 2.0 on BA?
Same problem with HTC Plus.
I think the problem is certificate sign.
Just to let you know that this issues is just not with your devices, we are also seeing the same problems with the Apache running Helmi's port of WM6. It shows in settings, but nothing on Today screen. Have tried certs and signing as well.
However, both 2.x versions work fine with the Titan running WM6. My thought was that there were some remnants from the WM6 port that were still using WM5.
maybe you are right, because i signed all files with one certificate and then with another ans it is the same result
If you guys have install the sdkcerts.cab before installing home then I dont think it is certs problem...it is more like device specific security setting problem
Maybe you guys can take a look at the WM5 security...each of the ROM might have different default setting. Some device even dont allow security setting to be change.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/wmsecurity.asp
I will also try copying the SampleDevPrevCert.pfx to the device and click on it. It will add the root cert to the thrusted certificate store. It may work it may not but very simple and worth a try.
Bottom line, if you try the "No Security" setting which allow all signed or unsigned apps to pass and the HTC Home still not working then I dont have any idea anymore.
Please try....
Out of curiosity why v2 of HTC home working on certain device and rom and not working on others, I have resigned all the dll, exe, and mui files with my own certificate.
Installation note in the Readme file inside the zip.
I am looking for some people to try if the cab work. As soon as 2-3 report still not working I will delete the attachment.
Test it, i couldn't install at all; "installation of ... was unsuccessful"; thanks anyway Schen.
Now installing, will keep you posted in few minutes
the instalation of the cab is unsuccessful (the home cab)
DANDANA said:
Test it, i couldn't install at all; "installation of ... was unsuccessful"; thanks anyway Schen.
Click to expand...
Click to collapse
Same error message for me
schen said:
Out of curiosity why v2 of HTC home working on certain device and rom and not working on others, I have resigned all the dll, exe, and mui files with my own certificate.
Installation note in the Readme file inside the zip.
I am looking for some people to try if the cab work. As soon as 2-3 report still not working I will delete the attachment.
Click to expand...
Click to collapse
I tried 3-4 times, but always installation of HTC Home cab was unsucessfull
Hi Schen,
Thanks for your help with this issue. I can confirm DANDANA's results on my Apache (Helmi's WM6 AKU .7) with no prior version of HTC Home installed. Your cert cab installs OK but the Kaiser.HTC.Home.v2.0.814.722.Resigned-schen.cab fails to install.
I believe this is due to the mui files (from my own experience in trying to unsign/resign them I think the certificate table gets corrupted somehow).
I sent you a PM earlier, but would it be possible to obtain a copy of all of the original HTC Home 2.0.814.722 PE files (prior to any hex editing & re-signing)? Helmi would like to take a look at it since it seems to be an issue with his WM6 ROMs (also affects his AKU .42 release for APAC).
Thanks again!
i have removed flags in cab for the self registering and shared for WmpPluginToday.dll and now it installs but it still does not work
xplode said:
i have removed flags in cab for the self registering and shared for WmpPluginToday.dll and now it installs but it still does not work
Click to expand...
Click to collapse
Yes....I forgot to remove the self registering of the plugin, that is the cause of installation unsuccessfull....Earlier I tested this on my hermes manually coying the files and it work OK.
I have remove the cab. AT least I am convince by now it is not the certs thing.
Luv...got your PM...I will have to look for the original HTCHome.dll if I still have it. As I said before....the hack I did was just to change the default directory (\windows) to (\HTCHome) for the graphics AND change it to call HTCUti1.dll instead of HTCUtill.dll...They are unicode hex editing only. You could hex edit and change "\HTCHome" back to "\Windows" and "HTCUti1" back to "HTCUtill", resign it and everything is back to original. The mui files came unsign. I have to sign the mui files to get it to work for hermes.
In the mean time....the main difference between v 1.5 and v 2.0 is the "PROFILE" Tab...Try to install, disable the "Profile", reset if necessary to see if it work. The attached cab only enable the Home tab by default...if it work, you can enable all other tabs one by oneto see which tab is causing the problem.
guys, been searching the forum, but could not find a solution.
tried the UNO version and K's easy install cab, but I keep getting the following error, when trying to launch the cube by sliding my finger from bottom to top: "error: Unable to open URL: /Program Files/SCLPF/Version 1-00.swf"
edited the touchflo config - so it finds the flashlite to "/Windows/saplaywm.exe"
so that seems to be ok.
I use a german rom, so maybe it's the folder structure?
I would be really happy to receive a hint by someone in the know.
thx in advance,
mr. t.
saplaywm.exe should be pointed to your directory in program files/ flashlite something like that.
appelton - sry, I don't really understand what you mean by "saplaywm.exe should be pointed..."?
Do you mean saplaywm.exe should reside in the Windows directory?
I think it must be something different, I just copied the "saplaywm.exe" to that respective dir - to no avail.
Everytime I slide my finger from bottom to top, to start the cube, it keeps asking for the "Version 1-00.swf".
Any other ideas?
thx
Change Version 1-00.swf to StartMusic.swf. You're using someone elses cab which is why have you have this basic problem. You might want to use my cab instead next time.
can someone please post me a copy of the above file located in the windows directory. from the 1.14.405.3 (22273) wwe - orange uk rom
failing that i can provide my email address via Private message...
cheers
Here you go
cheers
hopefully this will cure my problem.... with luck!
again cheers
failure....
obviously the other file is causing the issues.... anyone any ideas????
if you looking to get the stock file, i thought you could delete the copy in the windows folder and then it will reappear from the ROM copy? by the way, what issues are you having? was it caused by copying another volume file to get the colored icons?
volume buttons
tried the sdkcert thing and the volcontrol dll....
it disabled the keys great when device locked, however since installing i cant pair up or find the bluetooth headset... gone totally nutz
not the headset as tried on other device working perfectly, its the alteration, and this is the only thing thats been altered...
any ideas?????
help!
Hi all:
Seeking some help regarding the keyboard fix for tilt2. It was working fine for me when I use one of the official EUR 6.5 ROMs. I just flashed to a 6.5 WWE Hong Kong ROM with CHT and the cab is not working. I believe possibly because of the different IME for Chinese or the newer version of the ROM?
Instead of a cab is there some keys I can change/add to registry to fix that problem? It's driving me crazy not able to type properly...
Thanks in advance!!
I eneded up using the hwkeyboard cab to get the right FN and shift key....then I added takrim's keyboard control and reassigned all the keys to the correct place. Here's the XML file you can load to get all the keys...unzip and open keyboard config -> load -> and choose the xml file.
thanks for the xml, im having an issue with my numbers and symbols not working and this one seemed to remap it correctly when i put it into the keyboard config. However, the OK button is the FN button, and the FN button is caps lock, and im not sure what the capslock/shift button does (but it doesn't do anything when i press it)! . Is there a way to swap them in the config? i tried to do it myself but could only find how to create a rule and i dont think thats correct. Thanks!
install Toleraen's Tilt2KWKeyboard cab....for my initial testing it fix the FN and shift key but nothing else...
so now I have both the hwkeyboard cab installed - to fix FN and shift. Then use keyboard config + my XML for the rest.
Give it a try
Again. All the stuff you need.
I have downloaded these three files, but I do not know how to load them into my Tilt2. They don't unzip to .cab files. Could anyone help me with some instructions here?
Thanks in advance
RQDHD2 cab
Iam now using this fix and it worked for me and i can still sync with outlook
When i use HW keybord SIP keybord wil also hide
Works beautifully, thanks!
I got to modify your 'Keyboardconfig.xml" one-by-one as it is not working for mine. This may due to different ROM version. Anyway, attached my copy of .xml file & I'm using WME version of ROM. Hope this help those having same problem.