Database Users

Any other way to flash radio than SD card method?

Hi everyone,
Thanks for all of the good work happening her in these forums. It’s really amazing how much information is here. I have the following situation and wonder if anyone can help me sort it out.
I have a running qtek with an un-working radio. I have the developers SE ROM 1.2 installed and it’s running but very slow. The system can’t detect the battery and its charge. The radio is off and will not turn on. I tried to install the O2 4.21 radio update using the SD card using the repair file downloaded from your site but no luck. It stops after it reboots and start the upgrade process with the dreadful 1% can’t flash error. From what I read so far the problem hover around the radio not being able to detect the battery power so it stops the flashing process. I tried changing the upgrade file and to do it many times but still always stops at 1%.
One way I didn’t try is copying the upgrade file to the windows root directory and tries to upgrade from there instead from the card. I don’t know where to find the 2 monitors files needed to be installed there before the upgrade. Anyone knows where to get them from?
Is there any other way to flash the radio using the SD card method (I am traveling and don’t have the cradle with me.)
Thanks again.

Have you tried fixing it with the following?
http://xda-developers.com/repair.zip
Hope it helps.

I have exactly the same problem as ahmedateeq. Runnung the repair.zip files as suggested by beeheij just results in Radio Stack Upgrade failure at 1% every time the XDA soft resets (the only way to break this loop is a hard reset). I have tried two different RSU upgrade versions, but to no avail.
What else can be done?
Geoff :?

gwhitea said:
I have exactly the same problem as ahmedateeq. Runnung the repair.zip files as suggested by beeheij just results in Radio Stack Upgrade failure at 1% every time the XDA soft resets (the only way to break this loop is a hard reset). I have tried two different RSU upgrade versions, but to no avail.
What else can be done?
Geoff :?
Click to expand...
Click to collapse
Did you try to turn on your GSM using the bootloader, by Holding power button then Soft reset the unit, then if you see the logo "Bootloader 5.15" press the calendar button, then you will see the GSM menu, try to select GSM ON then press the action button( the middle of navigation key), when it go back to the menu then soft reset again, then check if it is working or not..Please telme the version of your unit RSU and RUU... thank i hope this will help you.
:?

Did what you said - I was able to turn on GSM in Bootloader (though there was no message to confirm) - but this hasn't improved the situation. I still get the upgrade failure at 1%.
My RUU is SER1.2 (based on O2 3.17.03. RSU is (WAS!) O2 4.21
Any more ideas? Is it worth trying to copy the upgrade files to the Windows folder on teh XDA and running it from there?
Thanks for your help.
Geoff

I tried switching the radio on as suggested, but it failes.
Can we try the windows root directory install method. I need to know where to get the 2 monitors files to be installed with the rsupgrade file. Any one know where to get them.
Any other suggestions (Gurus help needed here)
RUU is SER1.2, O2 3.17.03, RSU O2 4.21

ahmedateeq said:
I tried switching the radio on as suggested, but it failes.
Can we try the windows root directory install method. I need to know where to get the 2 monitors files to be installed with the rsupgrade file. Any one know where to get them.
Click to expand...
Click to collapse
Ok here you go!
http://www.o2.co.uk/personal/xda/docs/Radio_Stack_Upgrade_v421.zip

Thanks Qman,
I have this file already and its installed, but I dont see the 2 monitor files in the programme b directory. Are they included in the rsupgrade cap file and if yes which one is which?
Thanks again and still waiting for some creative thinking how to solve this delmma that hit so many members.

ahmedateeq said:
Thanks Qman,
I have this file already and its installed, but I dont see the 2 monitor files in the programme b directory. Are they included in the rsupgrade cap file and if yes which one is which?
Thanks again and still waiting for some creative thinking how to solve this delmma that hit so many members.
Click to expand...
Click to collapse
Yeap they're included in the RSUpgrade.sa.CAB!
What I would do is copy the RSUpgrade.sa.CAB to my device and run it from there and if the upgrade fails do a search for the needed files and relocate them manually.
HTH

tnsms.exe is missing?

ive updated my rom to molskis latest one, and on my xda mini now my right soft button is assigned to NEW SMS, this is what i want. but when i press it i get "Tnsms.exe" is missing or the certificate is not trusted and cannot open?
Anyway to fix this?
thanks

Place this in \Windows and you will be fine
Regards,
Molski

cheers mate

What do i have to do other than put the file in the windows directory. Cant get it to work on my new "Touch"

Lost BTTrayCE.EXE

Could any kind person post me or email me a copy of BTtrayCE for TP2 as I accidentaly deleted mine and now I can't use Bluetooth.
Info of the file path would also be appreciated.
Thanks in advance.

File attached
Hi clark97
That's wierd because normally if you delete a file in the ROM you just soft reset and it appears back.
Cheers
andrew-in-woking

Cheers , read in another post its because I installed tom tom 7.450 which overwrote it, for some reason a soft reset isn't enough and you need to either recopy or hard reset.
Thanks for reply
Clark

did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....

BTTrayCE.exe you will find this file in the \windows\ folder and a link in
autostart(i have delete it, i dont need everytime bluetooth on,
i have a link in the programm folder),
B2T.
when TT overwrite it, normally you can delete it(with TC or Resco)
after a Softreset you have the original BTTrayCE.exe back...

blader said:
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
Click to expand...
Click to collapse
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2 and everything will go back to normal.
Click to expand...
Click to collapse
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website

Paulplex said:
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Click to expand...
Click to collapse
Thx a lot !
Lost my BTTrayCe.exe (in fact, not that lost, rather the phone told me : "BTTrayCe.exe is not a valid WM application") after installing TT7.
After renaming the file all came back to normal.
So once again : thank you !

Thank you, that solved my father's problem

Problem solved.
Hi,
I had the same problem after installing TT7.
After renaming the two .dll files all was fixed after a soft reset.
Thanks you guys for your great advise and work.
With regards,
San

thanks alots

TT7 Fix!
Thanks for the Quick Fix!!!!

Where are these files!??!
I'm about to smash this phone!

tibbyltd said:
Where are these files!??!
I'm about to smash this phone!
Click to expand...
Click to collapse
Did you read the thread? It was clearly stated where this file is located.

helps me to thanks!

Bluetooth not working, is device broken? "Problem Solved"

Hi.
I am having some trouble with my LEO!
When I try to enable bluetooth trough comm manager, I recive a message that says "can not enable bluetooth".
When I am going on advanced settings menu and touch the bluetooth icon it gets highlighted but nothing happends. All others connections and icon do work perfect.
I have had my device for 3 days, and have never tryed bluetooth on it before. I have stock ROM on it.
Hope that someone can help me with this problem.
Sorry for crappy english! =)

Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...

Drakknar said:
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Click to expand...
Click to collapse
Yes, I have tomtom installed. Is my only option hard reset, and never use tomtom again?
When device is starting up I got a warning: BTTrayCE.exe is not a valid pocket PC program.
Any ideas?

It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.

ghale said:
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
Click to expand...
Click to collapse
Thank you so much! It is working perfect now! =)

You're welcome.

Same problem, trying to apply the same solution, but can't delete the file. I've tried with Total Commander but it says it can't! Any ideas what the 'user error' here is?

Please check if the attribute of the file is ROM.
If is ROM, then you have the original file.
If ROM is not set, then try to soft-reset the device then with the native file manager choose "Show all files" and delete the file.
Then soft-reset again.

It is read only, system and in ROM according to Total Commander. The native file explorer has now lost the delete option completely! Properly stuck now!

It's a normal behaviour of the file Explorer. You can't delete a ROM file.
You have the original file.
Try to delete BTTrayCE.exe, then and then restart.
It will be restored automagically.
Let me know.

That is also a ROM file and won't delete.

Ah!
I don't know, then, what is the problem.
What type of issue you have on your mobile?

Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.

Ok, but you can write what message you see, exactly, please?

paulrockliffe said:
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Click to expand...
Click to collapse
Factory reset will fix it, and was for me the only way to get it to work again.
For fun.. Try your FM radio. It does also not work anymore!

Sorry, I can't help you, then.

Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.

Hmmmmm! I'm not going to run a factory reset until I can put HSPL and a modified ROM, it's a pain not being able to use my bluetooth headset, but not worth the hassle of reinstalling everything. While I'm waiting I'm going to try out loads of other bits of software and workout how to use Sashmi etc to make it much easier to restore everything when I change ROMs.
Drakknar, if you could upload that file somewhere that would be useful, not just for me I'm sure. Maybe email it to the guy who's doing the hints and tips thread to attach it to that perhaps?

I'd be glad to share the link with everyone, but I think that posting a link to TomTom Cabinet in XDA-Dev would be against the rules. If it's allowed, I'll send the link to the author of the tips n tricks post, otherwise I can send a PM with the updated .cab to those who are interested

Drakknar said:
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Click to expand...
Click to collapse
maybe renaming the file will work?

[SOLVED] Damned ringtones!!!

I hope someone of you could help me! I'm cooking roms for xperia X1 with last EVK on windows XP!
I'm now using build 23568 or 23569 and a strange thing is occurring:
I've cooked successfully a pair of rom and then I needed to change something.... after that all my roms with that builds suffer by strange trouble:
when selecting a ringtone for the incoming call (I can preview its sound) and then hit OK to confirm it all the ringtones roll up and down for a second on the screen and then the default ring (windows-phone) is autoselected and no chance to close that window....... so I can't select different ringtones.
I've tried to revert back the change I made but the same happens. If I try to cook an older build I have in EVK it's working fine!!! I've tried to completely remove 23569 build and put it on from beginning but the same thing happens.....
Please help me! This is driving me crazy!!! I've searched up and down on this and other forum but nobody seems had this issue before.....

Does windows media player work? If it doesn't then it's a XIP issue: make sure you used the latest msxipkernel package.

I had that issue twice long ago. One time is was xip issue, the other time a bad lockstreamdrm package

Thanks a lot for the help! It was a xip issue..... I don't know why the msxipkernel had been modified.... restored the original one and it works!!
Thanks again.

Another XIP-file case solved!

I am having this exact same problem.....
i replaced the XIP and lockstreamdrm on first boot i was able to go into phone options and hear the ring tone without the corrupt error... but after just a bit i get a phone call and its silent....
i go back to phone options and try to play the ringtone and get the corrupt error...
After that i was doing some bmp replacements within the phcanimages and phcanimages2 and after replacing those to dll's on my device (they were the same as the ones cooked in, just updated bmps) i can choose ringtone without error and it rings on incoming calls...
any ideas?

did a clear storage and when phone came up i was able to select ringtone without error... was not able to try a call then because i had to activate phone..
after soft reset i am able to choose and hear when call is coming in..
so maybe the clear storage did it? i will report back after cooking again

This is most likely due to using the Lockstream DRM packages in EXT without the corresponding registry entries at the bottom of boot.rgu. Don't ask me why they put reg. entries from one program in two different places.

jwzg said:
This is most likely due to using the Lockstream DRM packages in EXT without the corresponding registry entries at the bottom of boot.rgu. Don't ask me why they put reg. entries from one program in two different places.
Click to expand...
Click to collapse
How can i fix?
after a few hours of ringtones working fine, i tried to go back into ringers and get the same corrupt error.......

Delete the Lockstream DRM packages (NOT Lockscreen) out of your ROM and see if it works normal.

jwzg said:
Delete the Lockstream DRM packages (NOT Lockscreen) out of your ROM and see if it works normal.
Click to expand...
Click to collapse
gotcha
trying now

I removed the Lockstream DRM packages from my kitchen recooked and still same error...
i also put fresh SYS & XIP's into kitchen...
im using the same kitchen i always have and didnt change anything that i havent changed before.... been cooking my BigMaxsense ROM for months now without this problem..
Thanks for any help

Okay just wanted to post what was causing my problem
i stripped my ROM clean and only put the essentials into it and started adding things a few at a time..(guess i should have done this to start with)
found out that Microsoft.Voice.Command.v1.6.21725 was the root of the problem.. removed it and everything works fine..
thanks to all that helped!