Found Kaiser.HTC.Home.v2.0.814.722-schen.cab in the Hermes forum:
http://forum.xda-developers.com/sho...hlight=Kaiser.HTC.Home.v2.0.814.722-schen.cab
Versin 2.0 allows you to add a diffrent number to favorite People (1.5 defaults to the mobile thus you need to create a new contact to use the Office number.).
Well that is the good news, the bad is that I cant get it to work on my BA
It installs well.
Under Start - Settings -Today - Items - It adds a HTC Home Tab.
The tick boxes work fine (fast as well JOKE).
And on the Today screen it adds Nothing.
I have done a old uninstall, new install, wait, softreset, wait.
This is a patched version based on the thread so may be the clean version would work.
So has anybody got Version 2.o to work on a BA ??
That's v 2.0.720719.
2.0.814.722 is here: http://forum.xda-developers.com/showthread.php?t=327646
DANDANA said:
That's v 2.0.720719.
2.0.814.722 is here: http://forum.xda-developers.com/showthread.php?t=327646
Click to expand...
Click to collapse
SOME PICTURES PLEASE!!
I didn't try it and MDAIIIUser said isn't working on BA....yet
It looks the same as 1.5 with aditional options, but i can't get it to work either, i install needed certificates but still nothing
xplode said:
It looks the same as 1.5 with aditional options, but i can't get it to work either, i install needed certificates but still nothing
Click to expand...
Click to collapse
2.0.xxx.xxx work much better than v 1.5....thrust me.
Are you able to get v2.0.7xx.xxx to work?
You can see that v 2.0.8xx.xxx and v 2.0.7xx.xxx and v1.5.xxx.xxx all using DIFFERENT certificate to sign. That is my experimenting on the certificates thing. All work OK with my Hermes. Maybe it is certificate thing...maybe it is other matter that prevent the new version from working correctly for BA. But really I DONT see any reason other than certificate. You can try to sign the dll with other certificates to see if it work or not.
I only patch the dll to enable instalation outsite of windows directory and to fix the brightness shortcut. Other than that nothing. So, this should not be the issue
Congratulation guys WM6 finally arrived for BA and Hima user. I should have hold my thrustworthy Hima longer I dont have to upgrade, BUT Hermes ROCKS, no regret.
Thanks schen for your input, i have tryed al the 2.0.x versions with the same certificates (looked mainly into hermes forums) provided for hermes, but the home settings show in today options and the plugin just does not load. I agree that this is certificate error i will try to sign them with difrend certificates to see what will happen
regards xplode
Edit: I have tryed both 2.0 versions on clean hard resseted rom with both certificates installed and none ot them does not work for some reason, now i will try to sign the dll's with sdk certificate to see the results
Anyone have any luck with Home 2.0 on BA?
Same problem with HTC Plus.
I think the problem is certificate sign.
Just to let you know that this issues is just not with your devices, we are also seeing the same problems with the Apache running Helmi's port of WM6. It shows in settings, but nothing on Today screen. Have tried certs and signing as well.
However, both 2.x versions work fine with the Titan running WM6. My thought was that there were some remnants from the WM6 port that were still using WM5.
maybe you are right, because i signed all files with one certificate and then with another ans it is the same result
If you guys have install the sdkcerts.cab before installing home then I dont think it is certs problem...it is more like device specific security setting problem
Maybe you guys can take a look at the WM5 security...each of the ROM might have different default setting. Some device even dont allow security setting to be change.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/wmsecurity.asp
I will also try copying the SampleDevPrevCert.pfx to the device and click on it. It will add the root cert to the thrusted certificate store. It may work it may not but very simple and worth a try.
Bottom line, if you try the "No Security" setting which allow all signed or unsigned apps to pass and the HTC Home still not working then I dont have any idea anymore.
Please try....
Out of curiosity why v2 of HTC home working on certain device and rom and not working on others, I have resigned all the dll, exe, and mui files with my own certificate.
Installation note in the Readme file inside the zip.
I am looking for some people to try if the cab work. As soon as 2-3 report still not working I will delete the attachment.
Test it, i couldn't install at all; "installation of ... was unsuccessful"; thanks anyway Schen.
Now installing, will keep you posted in few minutes
the instalation of the cab is unsuccessful (the home cab)
DANDANA said:
Test it, i couldn't install at all; "installation of ... was unsuccessful"; thanks anyway Schen.
Click to expand...
Click to collapse
Same error message for me
schen said:
Out of curiosity why v2 of HTC home working on certain device and rom and not working on others, I have resigned all the dll, exe, and mui files with my own certificate.
Installation note in the Readme file inside the zip.
I am looking for some people to try if the cab work. As soon as 2-3 report still not working I will delete the attachment.
Click to expand...
Click to collapse
I tried 3-4 times, but always installation of HTC Home cab was unsucessfull
Hi Schen,
Thanks for your help with this issue. I can confirm DANDANA's results on my Apache (Helmi's WM6 AKU .7) with no prior version of HTC Home installed. Your cert cab installs OK but the Kaiser.HTC.Home.v2.0.814.722.Resigned-schen.cab fails to install.
I believe this is due to the mui files (from my own experience in trying to unsign/resign them I think the certificate table gets corrupted somehow).
I sent you a PM earlier, but would it be possible to obtain a copy of all of the original HTC Home 2.0.814.722 PE files (prior to any hex editing & re-signing)? Helmi would like to take a look at it since it seems to be an issue with his WM6 ROMs (also affects his AKU .42 release for APAC).
Thanks again!
i have removed flags in cab for the self registering and shared for WmpPluginToday.dll and now it installs but it still does not work
xplode said:
i have removed flags in cab for the self registering and shared for WmpPluginToday.dll and now it installs but it still does not work
Click to expand...
Click to collapse
Yes....I forgot to remove the self registering of the plugin, that is the cause of installation unsuccessfull....Earlier I tested this on my hermes manually coying the files and it work OK.
I have remove the cab. AT least I am convince by now it is not the certs thing.
Luv...got your PM...I will have to look for the original HTCHome.dll if I still have it. As I said before....the hack I did was just to change the default directory (\windows) to (\HTCHome) for the graphics AND change it to call HTCUti1.dll instead of HTCUtill.dll...They are unicode hex editing only. You could hex edit and change "\HTCHome" back to "\Windows" and "HTCUti1" back to "HTCUtill", resign it and everything is back to original. The mui files came unsign. I have to sign the mui files to get it to work for hermes.
In the mean time....the main difference between v 1.5 and v 2.0 is the "PROFILE" Tab...Try to install, disable the "Profile", reset if necessary to see if it work. The attached cab only enable the Home tab by default...if it work, you can enable all other tabs one by oneto see which tab is causing the problem.
Related
Hi everybody!
(hi doctor nick)
I'm having a few little issues with CAB files on my pda2k.
maybe this should be in the blue angel thread, but it's to do with application development, so i put it here. I also tried the forum search, with no results.
i'm wanting to use all my customised cab files that i made for my XDA2, and use them on my new device, the PDA2K.
all of the cabs work, and all of my applications run.
however, upon installing the cab, a message comes up on my pda and says "the program you have installed may not display properly because it was designed for a previous version of windows mobile software"
i've checked the version nifo in all my .inf files.
i've compared them to newer cab files that don't give me that message.
the inf files look fine.
is this a registry setting perhaps, that i could change?
like i said, all the apps work, i just want to stop it from giving me that warning.
does anyone have any ideas?
thanks !
The warning is just about what it says: You are trying to run older (ie now specifically designed for SE) software.
Noithing to worry about when thing work as supposed.
You can get rid of the message by setting the OS verion inse the CAB files higher (but you need ie. WinCE Cab Manager by OCP Software for that) .
i know there isn't anything to worry about. the apps work.
it's just that for the purpose of creating an SOE, i don't want customers to have to click "ok" everytime they reset their device, all apps must install without prompt from beginning to end.
I have winCE cab manager, and have set the version and build number higher in the inf file, yet i can't seem to get rid of the message.
any other ideas ?
you have to set the lower version number to th version of WinCE youre using now.
Set some 'very high' value to the higher version number
There is another thread on this somewhere . . .thats where I got this info from
yeah, tried that too
i sset my version details like this:
[CEDevice]
ProcessorType=0
UnsupportedPlatforms="JUPITER","HPC"
VersionMin=3.0
VersionMax=10.00
BuildMin=0
BuildMax=100000
still no good.
anyways, i'll keep searching for the related thread. i new there would be such a discussion in here, just a matter of finding it.
I think it was versionMin=4.21
http://forum.xda-developers.com/viewtopic.php?t=15761
M4io said:
I think it was versionMin=4.21
http://forum.xda-developers.com/viewtopic.php?t=15761
Click to expand...
Click to collapse
thanks M4io,
that's the link i was looking for
ok, there seems to be something wrong here.
either that, or i'm doing it wrong (highly unlikely :lol: )hahha.
anyway, i've tried all different versions, i've tried all different build's.nothing. still won't work.
so i downloaded the latest operator settings for my device.
that cab ran no problems, so i extracted the inf, then i copied all the version info from that one, and dumped it into the inf that i'm trying to package. ran the cab on the device, and i still get that error !!
how can that be?
there must be something else in my cab, that governs version conflicts.
anyone
Hi Twinair,
please try to set it as follows:
[CEDevice]
ProcessorType=0
UnsupportedPlatforms="JUPITER","HPC"
VersionMin=3.0
VersionMax=4.21
BuildMin=0
BuildMax=-536870912
buzz
I've tried with the above settings buzz, but it still doesn't work.
does the CEsetup.dll, or setup.dll have anything to do with version control perhaps ?
could be, that you should use your own setup.dll
I really don't know now... I've never made a cab which was not complaining about the older version... (
Looked for it also in internet, but found nothing...
But if you download the trial ver of OCP CabManager, you can unpack cabs for SE and take a look there... my trial period is expired now...
Maybe you can try to use setup.dll out of such cab...
buzz
damn, still not getting anywhere.
i've put in the correct version info, i've used a setup.dll file from a known working cab file, i have the latest full version of cab manager.
i'm fresh out of ideas
back to the drawing board.
if i figure it out, i'll let you know.
This is what MSDN says at
http://msdn.microsoft.com/library/d...dnwm2k3/html/screen_orientation_awareness.asp
Installation Warning Messages
When a legacy application is installed on a Windows Mobile-based Pocket PC capable of screen rotation, the warning message will appear
This dialog is to advise the user that the application they are about to use may not be aware of square screens or screen rotation, and may not display properly in landscape mode. This dialog will only appear if the VersionMin value (which specifies the lowest OS revision number your app supports) file is less than 4.21.
Since setting VersionMin to 4.21 will prevent your application from installing on older Windows Mobile-based Pocket PCs, it is recommend that you disable this warning message by setting the BuildMax value (which is typically unused) equal to the following values:
BuildMax values
0xA0000000 Application supports square screens (240x240 pixels).
0xC0000000 Application supports screen rotation.
0xE0000000 Application supports square screens and screen rotation.
These parameters can be changed by editing the [CEDevice] section of the INF file which cabwiz uses to generate your CAB file.
so
[CEDevice]
VersionMin=4.21
VersionMax=4.99
BuildMax=0xE0000000
Should do the trick[/b]
@Shikra
...perfect man, let me test it... )))
THANX
buzz
GREAT!!! it works!!!
THANX
buzz
Is possible to group several cabs in one cab?
I want it to save in the Extended Rom of my TyTn, so that when I do a HardReset, automatic it starts to install all the modifications of registry and some programs that I have in several cabs from the pocket, without need of pc.
I search on the forum, but I don´t find any solution.
Thanks
Well first off, if you use the autorun.exe that already exists in the extended ROM and modify its configuration file (the name may be different for different devices, but it is usually a plain text file) you can get it to install several cabs in sequence.
Combining cabs is not always possible unless you are the one who created them in the first place.
Get a program called CE Cab Manager. It will show you everything that a given cab includes and let you edit it. As long as it's just files and registry settings there is no problem stuffing them all in one cab.
But if a two cabs contain a setup.dll there is no way of combining them without knowing exactly what that DLL does (it could be anything) and thats almost impossible (unless you can read ARM assembler well).
tristan1412 said:
Is possible to group several cabs in one cab?
I want it to save in the Extended Rom of my TyTn, so that when I do a HardReset, automatic it starts to install all the modifications of registry and some programs that I have in several cabs from the pocket, without need of pc.
I search on the forum, but I don´t find any solution.
Thanks
Click to expand...
Click to collapse
what levenum said is correct... so the best thing for you to do is to edit the config.txt file in your extended rom to have them install... HOWEVER if the cabs you are using arent digitally signed then they wont install using that method, you would need to disable the security first... Since no one has a signed disable security cab that works with the tytn the only option would be to do this on a hard reset; soft reset before the customization, when it boots run the tweak program to disable security, then go to the windows directory and manually launch the preautoconfig.exe
software alternatives
tristan1412, you can also use a software dedicated to this task.
check spb airsetup (www.spbsoftwarehouse.com, i'm not sure if it allows more then one cab), or even better airwizard (http://www.teksoftco.com/index.php?section=airwizard)
the advantage of these programs is in my opinion the compression. then you also get several options like readme/eula (with airwizard you have spash image support and even sd card output support - that creates autorun content for the sdcard)
hope this helps
RM
shogunmark said:
....HOWEVER if the cabs you are using arent digitally signed then they wont install using that method, you would need to disable the security first...
Click to expand...
Click to collapse
First of all, thanks for the answers.
now, How can signed digitally my own cabs??
Well finally done,
Do not expect equaliser and FM to work, I have not got the bacground files for them.
That bloody Exrom.img new format is hardnut to crack.
It is My-Systems diskonchip format.
Hope somebody helps me to get it working.
get the mediapluso2 second version from AtomLife hereby attached
hxxp://rapidshare.com/files/34379910/MediaPlusO2.rar
(This is the version 2 from Atom Life WM6 ROM, for WM5 Mediaplus Version 1 please tell me if required and if this not work)
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Carnivor said:
i installed but it says skins are corrupt, cant seem to find an uninstaller with it either to tidy back up again
Click to expand...
Click to collapse
I tested it on my EtenM700 with WM6, and the WM6 Professional Emulator on Laptop.It worked fine on them both.
Check whether a directory has been created with the name
_QHiddenPartition in the root of the device.
else this cannot work.
I just created this with WinCE Cab manager, install/uninstall options I will try to figure out.
_QHiddenPartition was created, and i could look at the bitmaps fine
Carnivor said:
_QHiddenPartition was created, and i could look at the bitmaps fine
Click to expand...
Click to collapse
sSorry, i should have told u, its from Atom wm6 rom, hence v2 will not work on WM5
Did you manage to get FM to work already?
Hi,
I’m trying to make the HTC Home Today plug-in on WM5 to work. With many try and a lot of will I was unsuccessful because ROM upgrade was not an option.
After many hours and days, I found out that there is an error when doing installation from the cab file. I was able to intercept the error. I found out that the HTCHome.dll doesn’t register on WM5.
I think there is maybe a reference in the DLL that looks to see witch version of windows mobile it’s on, and if the reference is ok then the file get registered, if not it doesn’t and fails to register.
Here I’m boys and girls, I need good soul that can help us (I say us because there is others that is dreaming) to get a workaround!
I’m at my limit knowledge to hack this DLL that’s why I writing this today.
Regards,
My phone is a HTC TITAN (P4000) with WM5
PS: the problem is not the phone model but the OS version…
Requirements to have this pluging working:
Windows Mobile 6 ( PocketPc).
HTC HomePlug: Today screen plug-in (Displaying Time/messaging notifications/Launcher), allowing quick changes of various options, such as weather, missed calls, sms/email notifications, time/alarm changing & program launcher.
Link to the current file:
http://www.megaupload.com/?d=8ZGSK4EE
http://rapidshare.com/files/36863085/HTC_Touch_Home_Plugin.cab
I didn't have time to look at this and don't know when or if at all I get the time, but if the problem is with the registry the solution should be easy:
Get a reg editor, got to HKLM\Software\Microsoft\Today\Items and manually create a key for the plugin. Check to see how other plugins are listed there and you will know what values to create (key name is what you see in the settings menu).
Other possibility is that the DLL is compiled with WM 6 SDK. Though I have not made many attempts with this it seems files compiled this way are not recognized as valid by earlier OS version.
This might be resolved by tweaking the DLL header.
levenum said:
I didn't have time to look at this and don't know when or if at all I get the time, but if the problem is with the registry the solution should be easy:
Get a reg editor, got to HKLM\Software\Microsoft\Today\Items and manually create a key for the plugin. Check to see how other plugins are listed there and you will know what values to create (key name is what you see in the settings menu).
Other possibility is that the DLL is compiled with WM 6 SDK. Though I have not made many attempts with this it seems files compiled this way are not recognized as valid by earlier OS version.
This might be resolved by tweaking the DLL header.
Click to expand...
Click to collapse
Thank for the reply!
YES i have done the registery edition in the today items and added the accorded strigs.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Today\Items\ HTC Home]
"Enabled"=dword:1
"DLL"="\\Windows\\HTCHome.dll"
"Order"=dword:0
"Flags"=dword:0
"Selectability"=dword:2
"Type"=dword:5
"Options"=dword:0
I think you have a good point with the DLL heathers.
Regards
any news about this?
HTC Touch home plugin
does it work on VGA?
Best regards
Deiota
There is a thread in this exact forum with a link to a working cab for WM5.
ok got it installed only one thing......im in reno nv and all the weather is in france and european places
Tregrad said:
ok got it installed only one thing......im in reno nv and all the weather is in france and european places
Click to expand...
Click to collapse
Have a look around for HTC Home Customizer
colonel00 said:
There is a thread in this exact forum with a link to a working cab for WM5.
Click to expand...
Click to collapse
can you please post a link...
Customization
http://forum.xda-developers.com/showthread.php?t=319308
6 buttoms - WM5
http://forum.xda-developers.com/attachment.php?attachmentid=51162&d=1190200940
thanks mate!
Anybody kind enough to provide a link for HTC Audio Manager for WM6 that is not in rapidshare format?
Thank you.
Ok found ICSinstall.cab on here and installed it, soft reset, and attempted to install the latest version of the WMWifiRouter program (which I finally succeeded in sourcing!).
However I get a message telling me cryptically that it 'cannot be installed' after attempting install. I wonder if this is related to ICS...
I now have the InShrUI.exe file in /windows/ *but* attempting to run it gives:
'The file 'IntShrUI' cannot be opened. Either it is not signed with a trusted certificate or one of it's components cannot be found. You might need to reinstall or restore this file.'
I reinstalled it over itself (i.e. ran the cab again) same error.
:-/
Was this the right file? I seem to remember it was dated 11th January 2008??
Thanks again for hte help folks!
I should say I'm running Microsoft Windows Mobile Version 5.0 (OS5.1.195 (build 14955.2.3.0).
Lastly I should say I've started a new topic as the last one was getting a bit off topic my original concern having been answered :-D (thanks guys!)
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Thanks. I'll try redownloading and repeating.
I was wondering if the file needed signed with some unique private key or something?
Anyways will give it a shot and report back
softonic123 said:
probably you only opened a shortcut (*.ink) and the shortcut pointed to a not existing file. Another thing is that it also was intsalled correctly (the *.exe), but the dll's or whatever are not installed.
Regards
Click to expand...
Click to collapse
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
MrVarioII said:
Thanks for your suggestion I'm now a tiny bit further on.
On soft resetting the PPC I get the following error:
'Pocket PC Networking
Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network settings.'
InShrUI is still giving the same error as before (and it's definately the .exe file I'm clicking).
However the improvement is: This time WMWifiRouter succeeded in installing...
However the same PPC networking error occurred during the install. I could probably tweak whatever is causing that error to use a static IP address rather than DHCP probably...but it's kind of dodging the problem.
And as said before I can't launch IntShrUI without getting that error. This time there is a shortcut to it though in program files.
I should also say that neither the executable or the shortcut has an Icon Image (i.e. it's the default no icon blank) so I suppose it might be the .exe file that's corrupt (since the shortcut get's it's icon from there I think?).
Last but not least:
WMWifiRouter reads:
Code:
'Not Connected'
Waiting for connection
I suspect the problem must lie with InShrUI but then again I'm a noob so I'll wait for the XDA gods to come and share their wisdom!
Click to expand...
Click to collapse
Is there no1 who can answer this? Anyone got any ideas?
Device is a hermes (T-mobile Vario-II) running WM5.....
There's one MAN point up for grabs for whoever can solve it!
I tried installing WMWifiRouter 0.89 onto a ROM which didn't have ICS included (which meant I had to try the same route you did) onto my Vario 2... I just couldn't get it to work, and I spent a while trying to make it work too.
I'm figuring that there's some deep-seated DLL or system association which ICS needs, which isn't configured if ICS is stripped out of the ROM - I ended up just reflashing with another ROM (the T-Mobile WM6.0 official ROM) and ICS and WMWifiRouter works fine.
Sorry that's not a solution, but it's the only way I could get it to work. Not an expert ROM cooker, so my knowledge of how ICS is stripped / included in ROMs is fairly limited, though I understand the concepts and techniques.
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
MrVarioII said:
Thanks for your help Christopher.
I considered flashing a working ROM. My worry is about losing all the programs I have installed on the device (it took a long time to get it *this* customised ;-) ) is there any way to flash the new ROM while keeping the old registry entries etc. for registering my programs (Especially those I've bought such as Oxford Handbook of Clinical Medicine - which I cannot register anymore)? ...
Or could I somehow back up the registry and restore it later (I know that's likely to be a dangerous idea...perhaps simply the file associations and programs stuff -the windows mobile section?)
Thanks bro!
Click to expand...
Click to collapse
Bumping as no replies for ages
Anyone?
Bumping again as no replies for a week or so
Bumping again to ask if anyone knows a way of slving this without having to reinstall all my programs, re register them, and reconfigure everything? (which I suspect installing a different ROM will do?) is it possible to back up the registry entries for all of my programs then do the ROM upgrade and restore the registry entries from my other programsMost of my programs are installed on the microSD card anyway (i didn't want to use up the main memory and slow the device up).??
If so how?
Thanks again folks !
I have the same problem...
I cant seem to find the answer but will continue to try.
if your programs are installed on your memory card then chances are you should be able to past shortcuts into the programs directory after reflashing. I tend to do this BUT I have found some programs that need to be re-installed or re-registered. Backing up registries can cause SERIOUS problems in itself so I would 1st do a full backup of your system (try spb backup, it backs up EVERYTHING on the phone then re-installs the lot so it seems like you never had a problem..) then flash. Try putting on shortcuts and if you have no luck you have the choice to start again on the new os or reflash to old and then restore backup (old problems wil still be there). Hope this helps.
Ps. I use resco explorer instead of the crap file explorer on the phone. It allows MUCH more versatility to do as I want. Cheers....