Related
When I have my cingular 8125 connected to my desktop and activesync is running, I can't connect to anything on the internet with my PDA.
I'm accustomed to being able to do that and my previous PDA devices used activesync and the PC's internet connection to do that. Can the 8125 not do that?
Yes, the 8125 and other variants of the Wizard can use ActiveSync's "passthrough" function using port 5721, so it's definitely not exhibiting normal behavior.
ActiveSync is syncing ok? Do you get the two back and forth arrows icon on top (indicating a passthrough connection)? What happens when you try to browse?
I confess I haven't seen this before but I would start by opening a command prompt on your pc. Type the command
telnet 169.254.2.2 5721.
If it returns "Connect failed" you have some software blocking the connection -- possibly firewall since it's the often the culprit in AS connectivity issues, but possibly other sync software, or vpn.
You might try disabling your startup items using msconfig then see if it works -- go to start > run > msconfig.
On the General tab, click Selective Startup, then uncheck the Load Startup Items box. Then click the Services tab, check the box that says Hide All Microsoft services, then disable the remainding services. Reboot.
You'll need to run AS manually once it's booted then see if it will let you use the passthrough connection.
Well, it syncs just fine. It just doesn't get the passthough connection.
The telnet works just fine also.
Interesting. What does it do when you try to browse using the passthrough? Does it try to open a gprs connection instead? Does it give an error message?
It errors out with a message: "The page cannot be displayed because the connection was lost. Please try again."
Some more information.
When connected via activesync, I can check email. It's only the pocket IE that can't get to anywhere.
Any ideas?
i'm hating activesync 4.1, it disconnects halfway through a file transfer then renders my device unuseable til i soft reset and makes my pc not shut down without unplugging it :x
Ive done all the firewall settings etc but it still doesnt work properly, i can only stay connected to my pc for about 3 mins.
Guess im gonna have to buy a card reader :roll:
dmonik said:
i'm hating activesync 4.1, it disconnects halfway through a file transfer then renders my device unuseable til i soft reset and makes my pc not shut down without unplugging it :x
Ive done all the firewall settings etc but it still doesnt work properly, i can only stay connected to my pc for about 3 mins.
Guess im gonna have to buy a card reader :roll:
Click to expand...
Click to collapse
Out of curiousity, are you syncing with bluetooth or USB?
with usb, i also have wifi in the house but it wont log on to that either :roll: it finds it ok (and next doors hehe :twisted: ) but thats as far as it'll go. it wont accept the network password (im using the pkey method)
ive done all the stuff suggested by m$oft but nothing seems to help. it could be an issue with my home network stealing the bandwidth apparently-does this sound right? i never had a problem with my ppc2003 ipaq on active sync 3.8 but now that wont work either without cutting off after 3 mins.
why does m$oft crap never work
When the Wizard is connected and the Activesync box shows on your Computer, when u go to File > Connection settings.
Is the tab "This computer is connected to:"
set to "the internet"
Cuz that was the problem with mine. I set it to internet, and voila!, hello world wide web.
i only want to transfer music+videos+photos etc, not bothered about syncing the other stuff like contacts or using it to go online as im on an unlimited data tariff anyway
I'm having somewhat similar issues to the OP. Activesync Sync's fine, I can transfer files to/from the phone...however Passthrough doesn't work. I've disabled my firewall, and checked and rechecked all the settings on the PC and the Phone with no luck. If anyone has anything to suggest please let me know.
-AnarchE
I hope it's ok to ask this question in your thread. It regards activesync and outlook. My problem is that I can not add a calendar event with any text added to the note field on my cell phone (Cingular 8125) and have it sync to Outlook on the PC. I always get an "attention required" message followed by a error code: support code 1.
If I only have a calendar topic and location without any notes, it syncs up fine. Or I can add an event on the PC and have lots of notes and it syncs to the phone just fine...but not vice versa.
Just wondering if any of you have a similar issue - I have Activesync 4.2 and Outlook 2002
Incidentally, I can surf thru my phone when connected usb to my Dell Inspiron notebook.
thanks
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
I have my 8525 setup to sync my calendar and contacts with my work exchange server. It works fine unless I connect my phone to my home PC and ActiveSync tries to sync it. I suspect the exchange server is setup to recognize mobile devices and not allow a non mobile device to connect.
Is there anyway to prevent the sync when connected to the PC and leave it enabled for getting it's own updates through it's own data connection?
Or is there a fix to let the PC successfully connect?
Turn off or uninstall ActiveSync on the home computer?
Can you just uninstall or turn off the ActiveSync app on your home PC? If you turn off the 'Start when Windows starts', it should stay off until you decide to open it on your own. The phone should still charge and that is the reason I am assuming you are plugging it in to your home PC. Just my 2cents.
Also depends upon DNS etc.
E.g. I have exchange server on local LAN, but use DynDNS to access it over the internet.
So, entry for my phone is mydomain.dyndns.org (or whatever). Thing is, when you plu the phone a PC on the LAN at home, it tries to resolve mydomain.dyndns.org, which of course it does, and ends up with my external internet address.
I solved this by putting an entry mydomain.dyndns.org in the hosts file of the PC I use to connect the phone, pointing to the LOCAL LAN address of the exchange server.
Hope that makes sense.
Could, of course, be irrelevant for you tho
Actually, I have just re-read your orginal post where you mention "Work Exchange Server" so what i have said is indeed probably irrelevant.
Turning off ActiveSync
eaglecomm said:
Can you just uninstall or turn off the ActiveSync app on your home PC? If you turn off the 'Start when Windows starts', it should stay off until you decide to open it on your own. The phone should still charge and that is the reason I am assuming you are plugging it in to your home PC. Just my 2cents.
Click to expand...
Click to collapse
I do use ActiveSync on my PC on occasion to install/remove software.
I am not aware of any way to deactivate it though. I could of course remove it from startup applications but once you launch it you cannot shut it down easily.
Exchange Sync
philg2000 said:
Actually, I have just re-read your orginal post where you mention "Work Exchange Server" so what i have said is indeed probably irrelevant.
Click to expand...
Click to collapse
Exactly.
The issue is work exchange and home PC.
Oddly though, I do not remember having this problem on my 8125. Perhaps I did have it and just do not remember.
Is there a way to stop the device from using the PC internet connect and force it to use it's own radio? I suspect this is not the device so much as it is ActiveSync on the PC side.
Is it a known issue that the exchange server is looking at the connecting device to determine if it is indeed a mobile device? The exchange server domain is listed as mobile.mydomain.com where our normal remote access exchange domain for Outlook Web Access would be mail.mydomain.com making me think it is specifically setup for Windows Mobile devices and it does some detection of the device type.
I do not seem to be able to setup different sync settings on the PC than on the device as they update to the other when connected.
Others must have this problem as well but I have not seen any other threads on it yet.
I'm just guessing here...
maybe you can try to erase your device from your home pc and stablis a new partnership again, but this time when the options apear, choose to sync nothing, I mean disable the sync options in ActiveSync at your home...
or set the new partnership as guest, this way the PPC wont try to sync but will let you explore or install programs.
If I understood rigth, you dont neet to sync info with your home pc, just instal programs or explore the PPC
edit: also, in Connection Settings in activesync put a checkmark in "allow wireless connection..." just to let your phone have a GPRS connection while attached to your pc.
Hope it could help.
Regards
Mablan
I cannot find an "Allow wirelessconnection" option in ActiveSync. I am running the version released a couple of months ago for the DST fix.
I think not plugging into the PC to charge may be the way to go and either plug into another PC without ActiveSync or into the AC charger. I was thinking about getting a cradle though and that would be a nuisance.
Would this same issue occur if I were using BlueTooth to sync with the PC? I wonder.
I also frequently have problems if the 8525 is left plugged into the computer overnight. It will sometimes lock up on me so that I cannot turn it on and have to soft reset, or it will seem to be working until I try and make a data connection and find that it will not connect and also requires a soft reset. This is a major nuisance when I am playing audio through a BT connect in my car and realize I cannot connect data and have to reset. The BT connect in my car is NOT automatic and I have to go to Com Manager/Settings/Bluetooth Settings/Devices then I have to Top/Hold on my Scosche adapter and select Set as Wireless Stereo. This is difficult to do while driving. Might have to look for a different BT receiver for the car as this is a nuisance that does not exist in my HT820 headset.
the_nite_owl said:
I cannot find an "Allow wirelessconnection" option in ActiveSync. I am running the version released a couple of months ago for the DST fix.
Click to expand...
Click to collapse
In Activesync...open File menu, then choose Connection Settings, a pop up window will open, in that window the last option is the one that has to be checked...
Also, if you connect your device to PC in home only for charging it, then I think the option of conect as guess is a good opction...
Regards;
Are you getting an error message?
Try browsing the internet while connected to the PC. Its often an XP firewall/security issue. I had the same problem with one of my PCs. Installing AS 4.5 fixed it.
Hope that helps you.
WM6 w/ Home, no other hacks that I can think of.
AS 4.5, WinXP
Just as the title says, when I tell it to explore the phone, it just goes to my C: drive on the PC.
I also have My Mobiler running, but it stopped working well before that. In fact, I don't think it's worked in several months, sometime shortly after I upgraded to WM6. Any solutions? Anything I add either has to be done by taking out the card and putting it in my PC, or adding to the 'to be synced' folder.
uninstall active sync and restart the computer then install active sync again. Make sure your device is disconnected during all this. If that doesnt solve it i would try backing up your phone using spb backup and try hard resetting it. The fact you can sync the folder shows that you have a connection. But is that my mobiler? Have you checked the settings options in active sync and made sure that allow connections via usb is selected?
My ActiveSync won't Sync
I found with "Enable faster data synchronization check box" ON then doesn't even start ActiveSync on PC. Instead the LAN icon starts searching for an IP.
if OFF then it tries then ActiveSync says ERROR code 85010001
this page
http://www.pocketpcfaq.com/faqs/activesync/exchange_errors.php
says An invalid HTTP communication or protocol syntax occurred.
reboot doesn't help.
Are you sync to Exchange of PC files?
if Exchange, try turn off push update, sync, and turn it back on.
sounds like it's stuck in modem mode or something.. have you tried switching between modes? e.g. put it in modem mode and disk drive and then activesync again..
no Exchange
turned off all except contact/calendar
tried disk drive and then activesync but no good
then tried turning bluetooth off and it worked with with "Enable faster data synchronization check box" off
so still not perfect
The more complex, the more can go wrong. Recently my HD2 has not been running activesync on connection. It is a problem after I have hibernated my PC, but also randomly at other times after a disconnect and reconnect.
Following hte advice above I've tried the change to modem, change to disk and back to activesync, but that did not help. Unchecking the "Enable faster data synchronization check box" has now allowed it to connect.
While activesync was unable to connect, I could still connect using a brilliant little program, sadly not recently updated, called mymobiler. That lets me control the HD2 from my PC< and do screen dumps as well. So how come that would connect but MS Activesync would not? And it was not a new install, I've had that since my first few days of the HD2 and worked well until the last couple of weeks, when this issue has become increasingly annoying.
While activesync was telling me I was disconnected, in the Windows 7 Devices and Printers there was an icon for a "Generic RNDIS" but nothing else about it. When on the HD2 I go back into USB to PC and check the tickbox for "Enable faster data synchronization" that icon reappears. Maybe disabling then enabling this check box has sorted it. Time will tell.
Hmmm...
It is not a new issue with activesync and htc phones. This thread is a year old.
In fact a search of hte web shows htis is common across several makes of phone.
Damn. When I installed HTC's latest hotfix for SMS, it soft reset the HD2.
On restart, the HD2 was not recognised by the PC, but it does show in Devices and Printers as the generic RBIS. So; uncheck the "Enable faster data synchronization" and it appears on the PC as a Generic Serial device, then becomes a live device in the Mobile Device Centre. I guess we won't be using faster then.
What I don;'t understand is why both of the showings in the Devices and Printers are Generic. Surely there is a driver?
argh, now it's broken again, had BT on...
htc has no clue and suggests (again) that I just keep creating a new partnership each time I have this issue (daily)
Are you sync'ing to an external exchaneg server as well as locally?
I had an issue with mine that the external exchange and local seemed to clash some how, I deleted the external and all internal connections from the phone's active sync screen and then the local PCwas able to re sync, then added each of the other conections and made sure that there where no contradictions in the syncing rules?
Maybe not your issue but worth mentioning!
speakerphone said:
argh, nowt's broken again, had BT on...
htc has no clue
Click to expand...
Click to collapse
I regret this is incomprehensible. "nowt" means nothing, so you are saying that nothing is broken again. That would be good, not bad. Your post then stops part way through and concludes negatively against HTC, though for no reason whatsoever. Please could you repost with something that makes sense?
I have no exchange servers, just local PC,
but all errors are exchange related, so HTC say.
if you dont have an exchange server then remove it completely ftom the list of sync locations (i cant remember how you do this, but its the same screen where you select what you want to sync). ive found that if it isnt being recognised that removing the phone from device manager list in windows (deleting drivers/software if asked) and reconnecting the phone seems to work. i have my driver install set to use windows update to locate drivers so try this as well
HD2 won't activesync via bluetooth
My LEO do sync properly via USB. Not connect absolutely via BT.
my setting is :
internal GPS connect via COM4 to TomTom7, VisualGPSce, TutorAssist
and seems to be:
bluetooth port IN is COM1
bluetooth port OUT is COM2
In my Notebook the lonely Local port is COM5. No other one is available
ActiveSync Bluetooth connection is set on COM5
So i know this thread is way old but figured id give it a try. The screen cracked on my TP2 and I cant get WMDC to recognize my device to pull the data. I'm pretty sure that enable faster data synchronization is checked and my screens broken so i can't fix that. Is there another way I can access the phone? Any help is appreciated ty.