I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
I have BT carkit, and BT handsfree,
and I have the same problem.
With my Nokia 6600, it works great,
there's no "default profile",
both works.
Even more confused now
Thanks for the reply - I'm even more confused.
What I ment to say that with the 6600 it works great, :lol:
unlink the i-mate pocket pc. :roll:
I have just purchased the xdaII and found this problem too...
Have you found out any more info on this?
The only thing i can do at the moment is rename the bluetooth device and it then prompts me to set as default...
Ta
Christian
Thanks for the tip
No I have not found out more.
I tried the widcomm drivers, but found headset was all screwed up.
Thanks for the tip on rename. I have been deleting and recreating.
Now we only need a application on the Today that can rename the two BT devices and back.
Maybey a reg.key-file we can 'click' ??
One more of the shortcommings of XDAII in anything related to the BT sofware.
I read about a new ROM version comming out soon, that is supposed to fix the those BT problems, Has anyone more info on that?
:?:
IanF said:
I have an i-Mate (v1.52.00WWE) and two (2) BlueTooth headset devices:
Parrot CK v3.11 - Car Kit
M3000 by Plantronics - Ear Piece
Both are bonded, but I guess I can only ever set one as my default at any time (obviously you can't have the call ringing in two places at once - but that would solve the problem!).
Is there a way of switching between them simply?, or having them 'auto select' the correct default profile?, or having them both active at once? I currently have to rediscover them to switch.
Would this be made easier if the i-Mate had both Headset and Handsfree (?) profiles? Is this available?
Hope its not such a silly question :lol:
Thanks in advance,
Ian
Click to expand...
Click to collapse
I just rx'd my Plantronics M3000 headset. It bonds to my XDA2 but I cannot for the life of me, answer or make a call with the headset.
1. When searching for a Bluetooth device, it finds the M3000 by Plantronics
2. I highlight it & tap next
3. I enter the bond code
4. I give it a name & tap finish.
Then it asks me, "This Bluetooth device supports headset profile, would you like to set it as your bluetooth headset?"
I answered Yes but I can't do the calling. Should this be answered No?
I originate a call on the XDA2, when it connects, I press and release the headset TALK button, hear a tone in the earpiece but the call never switches to the headset.
I have the green 3 sec blinking green light so unit is on. XDA2 has the blue indicator blinking.
Any feedback would be helpful since you do have the Plantronics,
Regards
Craig
Hi cshields1!
I don't have a Plantronics, but two SE HBH 30 and HBH 35 that work "somehow" with my XDAII.
First I would reccomend you to upgrade your ROM, since the Bluetooth radio stack of version 1.06.01 seem to have improved a bit over the previous ones (just in case you haven't yet)
Second, no matter what you do, actually you would NOT be able to initiate a call from your headset, you just can answer an incoming call and end a call, that is with the poor BT support in the XDAII.
Third, I'm not sure what you do, but please check:
- once your headset is bonded, turn your BT setting back to ON (BT icon on the bottom right of the Today screen)
- be sure your phone is NOT in flight mode
- Check that your "BT headset mode" in Today Screen is enabled
Tell me if this works.
:wink:
HELP!
people of great minds..... i need help with my BT headset. every time i turn off and turn back on my BT headset, i have to bond with my i-mate PH10B. i also tried BH tools but still same problem.
please tell me what to do.
thanks a lot.
Hi! I bought a cheap BT headset (ERGENIC BLUETOOTH HEADSET ERG BT-001). Althought my Orange C500 connect perfectly with this BT headset, my WIZARD don't. The headset is detected and wizard asks me for the password (0000) but after some seconds it says: connection impossible and back to the password screen. Any help from you? Thank you.
Re: My MDA-VARIO doesn't connect with my new cheap BT headse
dcoelho said:
Hi! I bought a cheap BT headset (ERGENIC BLUETOOTH HEADSET ERG BT-001). Althought my Orange C500 connect perfectly with this BT headset, my WIZARD don't. The headset is detected and wizard asks me for the password (0000) but after some seconds it says: connection impossible and back to the password screen. Any help from you? Thank you.
Click to expand...
Click to collapse
Is the wizzard a bluetooth 1.1 compatible ? the headset is a 1.1 product.
Maybe is that youre problem.
same problem here, same headset...
Same here.... I was guessing that the Wizard was compatible.... but hey you never know with MS - that would be too easy to follow a standard.
I'm hoping the new ROM which seems to be serfacing will solve the prob.
Terran
PS Maplins ? lol
Any solutions yet?
Mertoglu said:
Any solutions yet?
Click to expand...
Click to collapse
I wish....
Terran
No solution? please help someone
Hi
I have i-mate K-jam and recently I bought sony ericson Stereo bluetooth headset Stereo HBH-DS970.
I installed the a2dp hack but still the K-jam does not recognise the headset.
if u know how to solve this problem please explain like u have to explain to someone that does not have any experience in all this buisness.
Is there any other a2dp hacks?
thanx
it works with mine!
i have a molski 2.26 final version rom and it detects the hbh ds970 n works as wireless stereo well but just tht if there is an incomin call, the sound doesnt reroute back to the headset after endin the call...also, restartin the bluetooth chip or the ds970 doesnt work..but the phone has to be soft reset everytime
I m so disappointed!
I hone a SPV C500 since 2 years, last week I bought a stereo Bluetooth Headset Samsung SBH 100.
I succeed to connect my bluetooth devices with my phone, it’s working why the voice.
But to play the Mp3 on my headset, I installed Bt AudioToggle, and now I have a very very bad sound on my headset.
Is it possible to upgrade something or do I need to change my mobile ?
Please help me!
Thanks
Capjulio
Bt AudioToggle is a hack that sends all audio to bluetooth the same thing happen to my HTC wizard when using this but when using the A2DP profile the sound is great. I dont think they have A2DP for WM2003 SE but if you get it to WM5 maybe there is a chance you can get it to work.
Can u post Bt AudioToggle or a link i can seem to find it for smartphone.
Hi,
i bought a Samsung SBH100 BT headset, works fine with my Asus P535, but on the headset just only volume buttons working FF and play/stop don't do anything. I use CorePlayer (TCMP) on the PDA.
What I do wrong?
Please help!
THX
U can try change the regedit
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"MaxSupportedBitPool"=dword:78
"BitPool"=dword:40
"UseJointStereo"=dword:0
"Samplerate"=dword:48000
"BitPool"=dword:40