BT headset problem - MDA II, XDA II, 2060 General

HELP!
people of great minds..... i need help with my BT headset. every time i turn off and turn back on my BT headset, i have to bond with my i-mate PH10B. i also tried BH tools but still same problem.
please tell me what to do.
thanks a lot.

Related

bluetooth turning OFF when making a call

hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man
when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you
thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man

Phone autoresponse and bt headset

Hi,
I need to automatically pickup on calls. However this doesn't work if a bluetooth headset is attached: I have to use the headset button.
Moreover, if I answer tapping on screen, bt headset deactivates!
If I`m not wrong U have this option in Start/Settings/Phone...and then click on More there U have to check the box saying:
Answer incoming call withouth pressing
And then U have to chose how many times do U want your device to ring before answering...
Hope it will help!
Regards,
Primoz
P.s. If I`m not wrong...U have to chose a short ringtone for this...!
I have already done this, but the phone doesn't answer itself. I choose classic.wav ringtone....
Update
I found autoanswer is not working at all :-(
Anybody issued this problem?
unfortunately, I have the same problem.
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
jdee246 said:
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
Click to expand...
Click to collapse
In my oppinion the standard headset which is in the box with the JAM suxs!...is too quiet for me...I have tried it in my car and I have to take the phone from the car holeder and talk in normal way...I haven`t heard almost nothing from the headset...so I`m planning to buy a BT headset...but don`t know whichone to chose...
Regards,
Primoz
p.s. This was only my personal oppionion!
jdee246 said:
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
Click to expand...
Click to collapse
may be is some additional software to fix the problem with autoanswering? It is very big problem for me! because I use BT headset when I'm skiing with helmet on my head.
/
Yeah, the same with me. I used to use my NOKIA 6230 + jabra250. Jabra suites nicely under my Arai hemlet and I can ride my motorcycle and answer phone calls.
Any ideas what should be done?
Igor

bluetooth headset doesn't work with o2 xda2

hi guys, i bought a new o2 xda2 from my friend. he also had a logitech hs02-v bluetooth headset working with it. i took the headset to try but it didnt communicate while the xda2 had paired it.
i tried other headsets but no one worked.
xda2 finds the headset, make a pairing(i enter the passkey 0000) and then nothing....
so please help me
Connect the headset to the PC using the utility provided and change the paskey to any other(Like 1234) and then try pairing it...
Most probably it should work fine...
---------------
Sanjeev K Purohit
Did you turn your "Bluetooth Profile ON"?
After you paired your bluetooth-device.
You need to turn bluetooth on (by click at bottom right at Bluetooth icon).
and To turn bluetooth headset on, You need to click at Bluetooth Profile to make it on.
The Bluetooth Profile is stay on your Today screen.
:?: :shock: I have exactly same problem, using latest official rom and stuff - no bt tools or something.
Update: Works with BTTools :idea: 8)
Update of update: It seems that headset needs pairing each time after you turn it off and on. :shock:
I just got the logitech one this morning, it works ok with the MS stack, but I prefer using the widcom stack.
When I use the widcom stack the icon saying that I have the bluetooth headset is there, but the calls dont get channeled to it.
Is it possible to use the widcom stack for headsets? Or is it simply an incompatability?
ok i simply hard reset the device and the profiler brought bluetooth profile. now its ok.

Anyone experience with MDAII & Bluetooth headset?

Hi all,
I have an MDA II and a Plantronics M2500 BT headset. So far so good....
I managed to connect them together, and after some work (bonding, etc.), I was able to phone using my headset.
However, I have the following problem:
If I switch on my BT headset and enable BT on MDA II (so BT 'on', BT headset mode 'enabled'), the 2 devices do not automatically connect.
I have to 'play around' a bit, e.g. by disabling/enabling BT headset mode, turning BT settings on/off/discoverable, turning on/off the BT headset, and try calling some numbers for testing before it works.
After a short while (and if I'm lucky , I can call and receive calls using my headset.
This is of course not the ideal situation. I'd like to have the devices work automatically as soon as I turn them on.
I have the suspicion that this is a bug.... Did anybody else have similar problems and does anyone have an idea how to get this fixed?
Oh yeah: I am using a BT GPS mouse as well for TomTom 5 and this device is also bounded to the MDA II.
Thank you very much in advance!
BTW: the quality of the BT headset (once I get it working) is pretty good, so no problems there...
Yep, one of the problems with (some) BT sets...
Didn't have is with a Sony Errocson HBHxxx, did with a Jabra, didn't with a Supertooth2 etc....
Try the famous BTtools, it often helps...
Or get another headset

Can't Pair Bluetooth headset

Hey all, I'm new to the site. I've been reading a lot on everything about the Kaiser and I absolutely love it. The information on this site at times can get a little bit confusing but I still manage to get everything done.
My problem is that I can't seem to pair my bluetooth headset (Plantronics 520) with my At&t Tilt. My tilt is not able to discover my headset :-( I was wondering if there is any problem with my phone or just that my bluetooth headset is not compatible with my device
btw I have L26 V10 installed
Thanks in advanced to all those viewing and offering their help (and sorry in advanced for my English as it isn't my 1st language >.<)
Shimei said:
Hey all, I'm new to the site. I've been reading a lot on everything about the Kaiser and I absolutely love it. The information on this site at times can get a little bit confusing but I still manage to get everything done.
My problem is that I can't seem to pair my bluetooth headset (Plantronics 520) with my At&t Tilt. My tilt is not able to discover my headset :-( I was wondering if there is any problem with my phone or just that my bluetooth headset is not compatible with my device
btw I have L26 V10 installed
Thanks in advanced to all those viewing and offering their help (and sorry in advanced for my English as it isn't my 1st language >.<)
Click to expand...
Click to collapse
I think it is the settings off your BT Headset i think. It is a common problem for me with other BT Headsets.
Use the powerbutton from the BT headset till you get blue light without interuptions.
Then phone must "pair"
I had the same problem.
>.< even when my bluetooth headset is in pairing mode i can't find my headset on my phone :-(
Does anyone on this site use a plantronics 520 with their Kaiser?
Shimei said:
>.< even when my bluetooth headset is in pairing mode i can't find my headset on my phone :-(
Does anyone on this site use a plantronics 520 with their Kaiser?
Click to expand...
Click to collapse
Samme problem with 320 Plantronics & TyTN 2
If I push pickup call on headset the voice commandor start

Categories

Resources