My orange SPV M3100 won't start - 8525, TyTN, MDA Vario II, JasJam General

I have an Orange SPV M3100 that is spop on the Windows Mobile screen please halp....

Moved to hermes

Done a hard reset?
Tried re-flashing the device?
Gav.

Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems

Yes I Did A Hard Reset Doesn`t Work
How To Re-flash The Device Please

Put it in bootloader mode, then start the rom upgrade utility.
All you need is here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Don't be lazy and read

Related

Req: English ROM needed

Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all
http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:
Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort
tmobile's uk site would prob be a good place to start looking
2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...
Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?
Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?
I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks
i forgot to ask you what is soft reset and hard reset ?
sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan
You guys are wonderfull :lol: i got my XDA back by bootloader method .....

Can someone help me with death mda after flashing?

please can someone help me with my mda? I wanted to flash it to win 2003se. I downloaded 3.04.00_eng.exe from your ftp and started. BUt it wrrote that it isnt posible and now my mda dont works it only shows that it is uploading
Have you tried Soft Reset / Hard Reset?
If both didnĀ“t work, try installing a new ROM via SD-Card.
Instructions are here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan

Bootloader mode

hi
please how can i do bootloader mode i have an herald bloqued in spl ipl cause try to flash with awizard
now in downloaded some rom and can't flash it cause no connection
please how can i do bootloader mode
thanks
there is no more information in Wiki only this one - http://wiki.xda-developers.com/index.php?pagename=Herald_BootLoaderPassword
i did it
bootloader = holdon camera button and reset with stylus
hard reset HTC 4350
Hi guys,
I've tried all your crazy combinations of hard reset my HTC 4350 [aka Herald] and none really did anything! [beside the provided app.]
Can anyone of you enlighten me:
1. do i need to unlock my rom or smth??
2. can i get read of the original green theme stored in ROM after unlocking my CID?
10x a lot in advance,
C. Marius
c_marius said:
Hi guys,
I've tried all your crazy combinations of hard reset my HTC 4350 [aka Herald] and none really did anything! [beside the provided app.]
Can anyone of you enlighten me:
1. do i need to unlock my rom or smth??
2. can i get read of the original green theme stored in ROM after unlocking my CID?
10x a lot in advance,
C. Marius
Click to expand...
Click to collapse
Hold the 2 soft keys down while resetting the device... hold them down until a white message on dark screen appears.
Ciao.
help me please im nearly cryin' i tried to flash my herald to wm6 now i got i white screen and its there after Hard reset
Take your time to read around in the threads of the Herald forum. Your device could be bricked (probably.. srry)

how to hard test the p3600

i upgrat my phone p3600 use the hk ver wm6 when i upgate thell me the version is not right then my phone is stay at 3 colour . how to hard reset
now download asis en version wm6 also disp DQU3-TSKQ556-CLVBC:68-TSKQ556 error
anyone have the p3600 wm6 rom ?
I SEE THE WIKI AND CAN'T HARD RESET
HELP ME
MY PPC HOLD AT 3 COLOUR
Read the manuel
Hello
You have to puch three botons, those are the two screen botons and the soft reset.
soft reset is on the botom
the two screen botons are above the pick up and hang up botons
Then all at onse puch them
@jaaphooi. I think he means that he has flashed a rom without CID unlocking first, and is now stuck in bootloader. In which case a hard reset will not do anything.
if so
@ldlian. you will need to get the original rom which matches the original branding of the phone. then read the stickies in the upgrading trinity forum.

SPV M3100 Freezed at Windows Mobile logo

Hello All
I have One SPV M3100 Here When power up it just Stays at Windows Mobile Screen cannot go further....Person says he tried to unlock at home using the Unlocked Radio (HTC HERMES RADIO FOR SIMLOCK V1.16.00.69)....
What to do now to repair it back ..???
Kindly reply Urgent help needed....
I tried to flash that unlocked radio again it stops at 39% all the time.....i tried 3 times but same.....
Not sure if it would work but have you tried a hard reset?
If that doesn't help see the Wiki it will tell you how to repair this type of brick. If it is in fact a brick

Resources